briquetting system Articles

  • Briquetting – for more efficiency

    Normal 0 21 false false false ...

  • Wood shavings become coveted heating material / RUF Briquetting Press - Case Study

    RUF briquetting press saves carpenters from having a large shavings bunker and brings additional revenues. Master Carpenter Hermann Schreder knows problems with troublesome wood shavings first-hand. He has ended it three years ago and introduced an ideal solution within the scope of a business extension: With the RUF briquetting system, he compresses wood shavings to compact wood briquettes, ...

  • Roll-press briquetting helps Iowa lime producer retain previously wasted fines as valuable product case study

    Adding a new 550 tpd rotary kiln more than doubled lime production capacity at Linwood Mining and Minerals Corporation's Buffalo Plant, located near Davenport, IA...but it also raised the problem of what to do with a greatly increased output of fines. Realizing that landfilling its plant property with waste fines at rates of up to 100 tpd would not be a good long-term solution, the company not ...


    By K.R. Komarek Inc.

  • Turning wood chips and sawdust into a valuable solid fuel

    RUF briquetting units are the economical solution for the processing of wood chips and sawdust. Where timber is planed, turned and sanded, manufacturers end up with large quantities of wood chips and sawdust. By briquetting this material, you can recover a valuable solid fuel. Where large quantities are produced, the single briquette pressing system developed by RUF GmbH is the most economical ...

  • Engine part production department of MAN Diesel improves its productivity - Case Study

    RUF briquetting presses contribute to the success The powerful ship engines and power generators of the MAN Diesel Group are renowned for their reliability all over the world. Given the full order books, the future of the company looks very bright. To cater for the continued growth, the company is extending is production facilities in Germany on an on-going basis, thus further increasing ...

  • Recovering oil from grinding sludge - Case Study

    Zahnradfertigung Ott uses RUF briquetting unit A large volume of sludge is produced in the grinding of high-precision gears. In most cases, this grinding sludge is disposed of at high costs. Zahnradfertigung Ott, a specialist manufacturer of gears, found a better solution: since 2005, the company is using a briquetting unit from RUF to recover 500 litres of grinding oil per day from the ...

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Large volumes compressed into small volumes saves costs case study

    Vöhringer GmbH with its 120 staff and ultramodern machine park in Trochtelfingen each day processes up to 40,000 m2 of sheeting. This is mainly used for manufacturing specialist furniture parts up to complete furniture sets – especially for caravans and mobile homes but also for exhibition stand construction, for doors and the furniture industry. Chippings and dust accumulating during ...


    By WEIMA

  • From high-volume aluminium swarf to compact briquettes - Case Study

    Ruf briquetting machines help Trumpf increase output in laser component manufacturing. In order to ensure the highest possible output and productivity when machining aluminium, for the last two-and-a-half years Trumpf's laser components production unit has been operating as a fully-automated machining centre. It can operate unmanned for up to 60 hours, but to do this it needs both robots ...

  • Hol’z dir! Sustainable briquette manufacture in the Augustinuswerk Jessen case study

    Since only very recently the Augustinuswerk in Jessen has been producing wood briquettes under its own brand name of “Hol’z dir” in a separate workshop for the handicapped. Only machines from shredder specialist WEIMA are used for production, their own production facilities being only a few kilometres away in Großnaundorf. It is very busy here. Every day 3,000 wood ...


    By WEIMA

  • Welcome profit case study

    Mastel Aluminium-Halbzeuge GmbH in Talheim is doing very good business by turning all the aluminium cutting waste in production into profit. Shavings occur wherever planing work is done. If you replace planing with cutting, this statement applies accordingly to the imposing, 2600 sq.m. large production workshop of Mastel Aluminium-Halbzeuge GmbH where primarily aluminium is brought ...


    By WEIMA

  • Hydrocarbon evaporative emissions & control for automotives

    Even the cleanest and most efficient vehicle on the market today still pollutes the air and otherwise damages the environment. Motor vehicles emit several noxious pollutants which vehicle emissions standards are designed to regulate. Vehicles generally emit Hydrocarbons (HC), Carbon monoxide (CO), Nitrogen oxides (NOx) and Fine airborne particulate matter (PM) as pollutants that require control. ...

  • Martin-baker turns scrap metal and fluid into revenue stream with PRAB’s Dualpak Briquetter

    Challenge Aerospace manufacturer needs a chip and fluid processing system to keep up with its machining demands by reducing the volume of metal turnings and to recover expensive cutting fluids for reuse. Customer Martin-Baker Industry Aircraft Ejection Seat Manufacturer Products Dualpak ...


    By PRAB, Inc

  • Votecs gets Starbank’s Vote

    When Starbank needed a new shredder to cope with extra long offcuts, the close partnership between Schelling and Votecs made the decision to buy Votecs and easy one. Shredding the three metre offcuts from two automatically fed Schelling beam saws running at full tilt might well have been a problem for the Newton le Willowsbased panel specialist, Starbank, had it not been for Schelling ...

  • Starbank invests further with Schelling UK

    Philip Darbyshire, managing director of Starbank Panel Products picks up the story: "For Starbank it would have been very easy to rest on our laurels and once again congratulate ourselves on a good year of sales, however this is not how Starbank works. Our goal always is to move forward with product development, and along with that it requires careful investment to improve our production ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you