building air quality controller Articles

  • Intellisenc Building Air Quality Controllers control CO2, CO, VOC, O3, Humidity and temerpature.

    The quality of the air we breathe indoor (Indoor Air Quality, IAQ) is typically defined by the air chemical or gas composition and particulates. The sensors available today for sensing the gas composition of IAQ have many features and options. There is a wide application base for IAQ sensing with the most common being the regulation of HVAC ventilation systems for lower energy cost. Using an IAQ ...


  • Urban Air Quality Management

    ' Poor air quality due to pollution is a serious environmental problem in most urban areas. The greatest burden of pollution is on human health. Urban air quality management requires an integrated approach that (i) identifies the most serious problems and measures that offer cost-effective and feasible solutions across a range of economic sectors and pollution sources including industries, ...


    By The World Bank

  • Building Services Management - Air Sampling -

    Untitled Document Maintenance professionals are often the first responders to mold complaints in their facilities. building occupants can be exposed to fungal (mold) ...


    By EMSL Analytical, Inc.

  • Using Rn-222 to manage the air quality of air conditioned buildings in Hong Kong

    This paper proposes a pragmatic methodology to manage the air quality of an air conditioned building as well as optimizing energy consumption during venting. Radon-222 (Rn-222) is used as a tracer to quantify the specific production rates and resultant losses of pollutants for which the information is important in indoor air quality management. A term, indoor pollutant inventory, is introduced ...


    By SAGE Publications

  • Case study of odor and indoor air quality assessment in the dewatering building at the Stickney Water Reclamation Plant

    Indoor air quality (IAQ) and odors were determined using sampling/monitoring, measurement, and modeling methods in a large dewatering building at a very large water reclamation plant. The ultimate goal was to determine control strategies to reduce the sensory impacts on the workforce and achieve odor reduction within the building. Study approaches included: (1) investigation of air mixing by ...


    By IWA Publishing

  • Carbon Monoxide, Carbon Dioxide and Indoor Air Quality

    Chances are that unless you are hot or cold – or if you smell something funny – you probably never think about indoor air quality. However, scientists know that gases in the air that you cannot see or smell can still affect your health. Carbon Monoxide The most dangerous gas most of us will ever face is carbon monoxide (CO). Not normally occurring in nature, this ...


    By Air Concern Limited (ACL)

  • The Hidden Danger Of Air Quality in Indoor Firing Ranges

    Indoor gun ranges are popular with both professionals who use guns as a part of their job and hobbyists who just enjoy guns and shooting. ...


    By Camfil Ltd

  • Regional air quality management in China: the 2010 Guideline on Strengthening Joint Prevention and Control of Atmospheric Pollution

    This paper examines a new initiative to build a region–based air quality management system in the People's Republic of China, and identify its key features, significance and potential challenges. This Guideline on Strengthening Joint Prevention and Control of Atmospheric Pollution to Improve Air Quality is a major new policy initiative developed by the Ministry of Environmental Protection (MEP) ...


    By Inderscience Publishers

  • Sick-building syndrome and building-related illness

    Significant health problems linked to very poor indoor air qualityIndoor Air Quality (IAQ) deals with the content of interior air that could affect health and comfort of building occupants. The IAQ may be compromised by microbial contaminants (mold, bacteria), chemicals (such as carbon monoxide, radon), allergens, or any mass or energy stressor are more prevalent than anyone could have predicted. ...

  • Asbestos in Buildings: Practical Guidelines for Building Owners

    Practical guidelines for building owners Overview Friable asbestos-containing materials are present in many public and commercial buildings, schools and factories built before the mid-70's. Regulations in Ontario and some other provinces require building owners and property managers to put in place asbestos control programs, once they are aware of the presence of friable asbestos-containing ...


  • Mold, Mold Growth and Buildings

    Concern about mold exposures in buildings continues to be a significant issue. The bottom line is that mold has been around for eons and is not going away.  It will grow whenever and wherever buildings get wet and materials suitable for mold growth are present.  The following paragraphs are meant to shed light on mold issues related to microbiology, health and safety, moisture control, ...

  • Green Buildings: Economics and Policies

    Introduction Green building has received increased attention over the past decade from both environmental economists and policymakers. While there is no single definition of “green buildings” or its related policy, researchers and organizations tend to emphasize resource efficiency in building and reducing the impacts of buildings on human health and the environment. ...


    By Oxford Journals

  • Indoor air quality can be improved by employing plants as walls

    The practice of planting ivy to climb up the walls of buildings has existed for centuries. Now, the trend towards sustainability and green building practices can lead to the development and use of living walls as a means of filtering and improving a building’s indoor air quality. Green walls are a living, breathing, regenerating type of cladding that can be as simple as a living art installation ...


    By Actual Media

  • Home, Sweet Wastewater Building

    How can a wastewater treatment plant embedded into a neighborhood not use much landmass and be environmentally friendly and user-friendly all at the same time? One system aims to do all of the above. Why should a wastewater treatment plant always have to look like, well, a wastewater treatment plant?  A visual trip through project files of Aqueonics Inc., based in Greenville, SC, reveals photos ...


    By Aqueonics, Inc.

  • Minimising Risks to Air Quality and Regulatory Compliance With Total Filter Management

    It has been shown in recent studies that as much as 25% of the total site operating budget (excluding raw material costs) for a typical medium-large dosage-form manufacturing facility will be spent on compliance measures for internal quality systems and external regulatory activities. (1) Market realities indicate that the pharmaceutical companies will need to address the overall cost of ...


    By GVS Filter Technology

  • How to Get Higher Acceptable Indoor Air Quality Anywhere

    The quality of the indoor air we breathe is a concern for everyone, especially those in urban environments where contaminant and particle levels are higher due to nearly constant exposure to things like automobile and truck exhausts, construction, and fumigation. Unfortunately for most people, when it comes to the quality of the air in the buildings where they spend most of their time, ...


    By Camfil Ltd

  • Hyperion case study - UVC lights enhance air quality

    Located at the center of the Hyperion Wastewater Treatment Plant in Los Angeles, the Pregerson Building was experiencing indoor air quality (IAQ) problems. Built in 2002 to house nearly 400 city employees, the facility rapidly became the source of complaints about poor IAQ and odors. An engineered solution that incorporates both an odor control unit and supplemental ultraviolet- C (UVC) lights in ...


  • Control water – control mold

    There is no single universal way to eliminate all mold growth. But the single most effective method of controlling mold is to eliminate their source of moisture. Moisture doesn’t just mean actual water; it can also be high humidity. Few molds grow when the humidity is under 70%. If they do, it is very slowly. It is safe to say that you cannot stop mold growth until you stop the moisture. ...

  • Canarina DISPER Software · air quality dispersion model · algorithms 3

      Canarina DISPER Software · air quality dispersion model   Symbol / Definition Ly= Initial plume length for Schulman-Scire downwash sources with enhanced lateral plume spread (m) Lb= Lesser of ...

  • From “Light Green” to Sustainable Buildings

    As more people move to urban areas in search of economic opportunities, the number of buildings that are needed to house them continues to rise. It is estimated that by 2030, an additional 1.4 billion people will live in cities, of which 1.3 billion will dwell in cities of developing countries. The increasing number of buildings has long-term impacts on both the environment and natural resources. ...


    By Worldwatch Institute

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you