bulk chemical storage Articles

  • Bulk Storage Installation

    CPS was awarded the contract to supply new Spiral Wound HDPE bulk storage vessels for a large pigments manufacturer. The contract involved the supply, fabrication and installation of new 34m3 Sodium Hydrogen sulphide and 30m3 Sodium Hydroxide storage tanks. Each tank was supplied with integral Spiral Wound HDPE Bund and rainskirt complete with actuated discharge valves, heaters and level ...

  • Energy Institute to deliver guidance for bulk liquid storage

    The El will be presenting newly published guidance on how to deliver improvements to secondary containment for above-ground storage tanks, and how to evaluate the need for and conceptual design of tertiary containment systems, to meet the requirements of the COMAH Competent Authority Containment Policy. Dr Mark Scanlon, Technical Team Manager - HSE, will be speaking at the Tank Storage ...


    By Energy Institute (EI)

  • Bulk tank cleaning case study

    We were contacted by a West Midlands based chemical manufacturer that required a large number of their tanks to be cleaned and decommissioned prior to demolition. The cleaning required a combination of non-man entry and man entry tank cleaning techniques an area that Progressive excel in. After several site visits and an audit of Progressive’s Health, Safety & Environmental procedures ...

  • Bulk Bag System Design Considerations

    Designing a new Bulk Bag Mix Tank Feed System? Here are some considerations during the design phase that will help meet expectations of plant managers and operators alike: Gravity feed of solution or metering pumps: Depending on the installation, solution/slurry from the mix tank can be gravity fed to process or if discharging into pressure, ...


    By IPM Systems, LLC

  • Adapter bacteria control oil spill in bulk

    Introduction Microbac was called in to advise on a required treatment for an integrated bulk oil handling facility and sea-land terminal, receiving, storing and shipping a wide variety of liquid fuels, inorganic chemicals and petrochemicals, many of which are toxic to microorganisms. The variable and complex waste streams from tank truck cleaning, ballast and tank cleaning discharges from ...


    By Microbac Ltd

  • Higher-Quality Pumps Work Best For Bulk Liquid Terminals

    When you’re running a dockside petroleum liquid products, chemicals and LPG/LNG or multiple bulk liquids terminal, your reliability as a supplier – and the ability to win repeat business – is heavily reliant on the quality of the fluid-handling equipment and pumping systems on hand. Reliability rules For terminal operators, reliable handling and high transfer ...


    By DESMI A/S

  • Moving difficult-to-handle bulk materials with flexible screw conveyors

    Flexible screw conveyor systems can be engineered to transport bulk materials that tend to pack, cake, smear, break apart or fluidize, and can prevent the separation of blended products. Flexible screw conveyors (Fig. 1) are suitable for most bulk materials, from sub-micron powders to large pellets, both free-flowing and non-free flowing. They are capable of conveying bulk materials at any angle ...


    By Flexicon Corporation

  • Chemicals used for pH Adjustment

    The Chemistry of Limestone Treatment: Limestone is an alkaline agent with the ability to neutralize, or partially neutralize strong acids. The neutralization process occurs when strong acids, in intimate contact with limestone chips, react with Calcium Carbonate (CaCO3, the primary constituent of limestone) to form water, carbon dioxide and calcium salts. The following depicts the neutralization ...


    By Digital Analysis Corp.

  • Chemical Spill Response Products & Procedures

    The current political and world climate has forced the Emergency Response Community to take a closer look at the number of potential hazards that they may be called upon to deal with. Of particular concerns are the response to terrorist and/or chemical incidents. Depending on the type of event, responders may be faced with a myriad of challenges and onsite dangers. With a chemical release, the ...


    By Fast-ACT

  • Waste Incineration Upgrades at the Eastman Chemical Company

    INTRODUCTION Eastman Chemical Company, headquartered n Kingsport, TN, is an international supplier of organc chemicals, fibers anci plastics with annual sales of approximately $46 biNion and approximately 5300 customers worldwide. Tennessee Eastman Division, also located in Kingsport, is the company’s largest manufacturing fadllity The nine hundred acre site contains manutacturing facilities as ...


  • Hazardous Material Storage Installations : Addressing concerns on safety and building public confidence

    Much public concern is raised on hazardous material bulk storages at vulnerable locations that cater the requirements of basic industries. This concern has grown into serious proportions after the ‘Bhopal’ incident. The Bhopal Gas Tragedy, history’s worst chemical accident, occurred in the night on 2nd Dec, 1984 at the Union Carbide Pesticides Plant in Bhopal, India. Around 27 MT of deadly ...

  • "A Non-Chemical Water Treatment for Cooling Towers"

    Untitled Document Introduction This paper will describe a case study of a ...


    By Dolphin WaterCare

  • Chemical Air Pollution in the Clinical Research Environment

    There has been a revolution in awareness of chemical air pollution in research laboratories. I could tell you several 'horror stories' of casual exposure to mercury vapour, benzene and chromic acid (the ultimate glassware cleaning agent) among innocent biomedical PhD students (including myself) in the 1970s. But researchers in hospitals, and other laboratories can never afford to be complacent ...


    By Commercial Air Filtration

  • Seattle, WA - Active chemical distribution facility - Case Study

    Guaranteed Remediation of TCE and PCE under Active Facility Project Summary TRS Group, Inc. (TRS) working with FLOYD|SNIDER a local Seattle consulting firm, completed a guaranteed fixed price remediation (GFPR) of tetrachloroethene (PCE) and trichloroethene (TCE) in soil at an active bulk chemical warehouse and distribution facility in Seattle, Washington. ...


    By TRS Group, Inc.

  • From Waste in Anodising Plant to New Chemical Product in Sewage Treatment Plants

    Aluminium containing caustic soda used as a pickling agent in the pre-treatment of aluminium before anodising and aluminium containing sulphuric acids used as electrolytes for the formation of oxide layers in anodising plants can be utilised in municipal sewage treatment plants to reduce phosphates and improve precipitation. From the anodiser's point of view, these products are spent once they ...


  • Some Chemical Applications Require the Range of a Positive Displacement Pump

    Chemical manufacturing includes complex processes. In fact, chemical manufacturing processes are so intricate that, typically, several unit operations exist within an overall process. These may include cracking, distillation and evaporation, gas absorption, and scrubbing and solvent extraction. Within these operations, transferring is the process of transporting fluid from one point to ...


    By MOUVEX

  • New University of Minnesota study documents mercury vapor emission levels and need for safer packaging, storage and transportation of fluorescent lamps

    Results of a recent study conducted by the University of Minnesota School of Public Health, Division of Environmental Health Sciences suggest that most containers used for storage and transportation of used fluorescent lamps to recycling centers do not provide necessary levels of protection against mercury vapors emitted from broken lamps. The new study, published in the March issue of the ...


    By VaporLok Products, LLC

  • Rotork is ‘one-stop actuation shop’ for storage tank expansion project - Case Study

    Overview Rotork has demonstrated its ability to be a one-stop shop for valve actuation products and services for an oil storage tank expansion project in Holland. Rotork's activities have encompassed the supply of intelligent electric actuators for isolating, modulating and failsafe valves, digital control systems, valve gearboxes, valve adaptation, workshop motorisation, on-site ...


    By Rotork

  • Buried Waste Containment - Soil Excavation, Emission Abatement

    Products & Equipment Used: Pneumatic Foam Unit 400/25 Bulk Storage & Dilution System (BSD) AC-645 Long Duration Foam AC-904 Long Duration Foam Application Summary: Uniroyal Chemical disposed of an extensive list of waste chemicals collected in unlined pits. This was normal before hazardous waste regulation in ...


    By Rusmar Inc.

  • An alternative cooling tower disinfectant: On-site generated mixed oxidants

    Favorable temperatures (80-110°F) and availability of nutrients make cooling tower systems ideal places for microbial growth. Accumulation of biofilm impedes proper heat transfer and secretes metabolic products that contribute to microbiologically influenced corrosion (MIC). The films also may propagate and release disease-causing bacteria. Control of microbial growth is traditionally ...


    By MIOX Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you