bulk material transport Articles

  • Moving difficult-to-handle bulk materials with flexible screw conveyors

    Flexible screw conveyor systems can be engineered to transport bulk materials that tend to pack, cake, smear, break apart or fluidize, and can prevent the separation of blended products. Flexible screw conveyors (Fig. 1) are suitable for most bulk materials, from sub-micron powders to large pellets, both free-flowing and non-free flowing. They are capable of conveying bulk materials at any angle ...


    By Flexicon Corporation

  • New developments of vibratory feeders for large bulk material reclaim systems

    Summary The efficient economical storage, movement, control and blending of large tonnages at coal handling installations such as mines, power plants and port facilities require new and improved designs of vibratory equipment. Environmental and investment impact as well as operational advantages must be considered in the development of any new reclaim system. ...


    By General Kinematics

  • Envision 2050: The Future of Transportation

    What will transportation be like in 2050? Will we all be stuck in one giant traffic jam? Flying to our appointments in personal airborne delivery systems? Teleporting ourselves and our stuff around? Or not going anywhere at all? In large part, the answers to these questions will depend on how we answer two other questions today: What would we like it to be like? And what would it ...


    By Ensia

  • Costco Bulks Up Compliance Program with 3E

    Untitled Document Background Costco Wholesale Corporation operates an international chain of membership warehouse stores, mainly under the "Costco Wholesale" name, that carry quality, brand ...


    By 3E Company

  • Costco Bulks Up Compliance Program with 3E

    Background Costco Wholesale Corporation operates an international chain of membership warehouse stores, mainly under the ""Costco Wholesale"" name, that carry quality, brand name merchandise at substantially lower prices than typically found at conventional wholesale or retail sources. As of March 2004, Costco operates 319 warehouses in 38 U.S. states and Puerto Rico with more than ...


    By 3E Company

  • Adapter bacteria control oil spill in bulk

    Introduction Microbac was called in to advise on a required treatment for an integrated bulk oil handling facility and sea-land terminal, receiving, storing and shipping a wide variety of liquid fuels, inorganic chemicals and petrochemicals, many of which are toxic to microorganisms. The variable and complex waste streams from tank truck cleaning, ballast and tank cleaning discharges from ...


    By Microbac Ltd

  • Transportation revisions are coming down the pipeline

    The U.S. Department of Transportation's Pipeline and Hazardous Materials Safety Administration (PHMSA) recently signaled interest in revising the hazardous materials regulations (HMR) governing transportation of combustible materials. PHMSA seeks to harmonize domestic and international regulations applicable to transportation of combustible liquids. How It All Began PHMSA on April ...


    By Bergeson & Campbell, P.C.

  • U.S. adopts global transportation standards

    New proposed shipping rules that harmonize with international standards will require some study. On Aug. 24, 2010, the Department of Transportation's Pipeline and Hazardous Materials Safety Administration (PHMSA) proposed to harmonize the Hazardous Materials Regulations (HMR) with international standards – 75 Fed. Reg. 52069. The proposed rule revises several proper shipping names, hazard ...


    By Bergeson & Campbell, P.C.

  • The true value of magnetic separators and metal detectors in bulk handling

    Introduction The purpose of a bulk material handling may be to transport material from one of several locations to an ultimate destination or to process material such as ore in concentrating and smelting or handling materials for manufacturing. The handling of dry materials in loose bulk form involved the extensive use of static machinery such as belt conveyors, screw conveyors, and various ...


    By Eriez Magnetics Europe Ltd

  • Higher-Quality Pumps Work Best For Bulk Liquid Terminals

    When you’re running a dockside petroleum liquid products, chemicals and LPG/LNG or multiple bulk liquids terminal, your reliability as a supplier – and the ability to win repeat business – is heavily reliant on the quality of the fluid-handling equipment and pumping systems on hand. Reliability rules For terminal operators, reliable handling and high transfer ...


    By DESMI A/S

  • TRANSPORTING ORGANICS - RAW FEEDSTOCKS TO FINISHED PRODUCTS

    Untitled Document Facility operators find that transport trailers with moving floors are the most versatile when handling a wide range of feedstocks and end products. THE ...


    By BioCycle Magazine

  • Bulk reactive media utilized in sediment cap remedy for large-scale remediation project case study

    Project: West Branch Grand Calumet River Reach 1-2, Roxana Marsh Legacy Location: East Chicago. IN Products: Organoclay2 PM-199 Background: in 2011. clean up began on Reach 1 and Roxana Marsh in the West Branch of the Grand Calumet River. This project involved mechanical and hydraulic dredging and removal of 222,000 cubic ...


    By CETCO

  • Extraordinary electron and phonon transport through metal-semiconductor hybrid nanocomposite: decoupling electrical and thermal conductivities for thermoelectric application

    We report a simple method involving mechanical attrition followed by hot press sintering to fabricate tablet samples consisting of silver nanoparticles (Ag NPs) dispersed in luminescent silicon nanocrystal (Si NC) matrix. A dramatic increase in current by almost six orders of magnitude is observed for this type of Si NC-Ag NP hybrid nanocomposite compared with bare Si NC-based tablets. Collective ...


    By Inderscience Publishers

  • DOT eases requirements for security plans

    On March 9, 2010, the Department of Transportation"s Pipeline and Hazardous Materials Safety Administration (PHMSA) narrowed its list of hazardous materials, or hazmats, that require security plans when transported in commerce. The new rule is effective on Oct. 1, 2010. Currently, persons offering certain hazmats for transport in commerce must develop and implement security plans. PHMSA revised ...


    By Bergeson & Campbell, P.C.

  • Compliance Corner - Develop and implement

    On March 25, 2003, the US Department of Transportation (DOT) issued an emergency revision to the Hazardous Materials Regulations (HMR) relating to security training and security planning for transporters and offerors (shippers) of hazardous materials (hazmat). DOT recognised a need to address growing concerns over the significant threat that hazmat can pose when it is used for malicious or ...


    By 3E Company

  • The environmentally hazardous substance mark is now mandatory

    Don't let you shipments get refused. The latest version of the UN Recommendations on the Transport of Dangerous Goods introduced a new marking for goods classified as Marine Pollutants. This rule became effective January 1, 2010 for IMDG shipments and January 14, 2010 under 49 CFR. According to the U.S. DOT's 49 CFR Hazardous Materials Regulations and the IMDG CodeA non-bulk package for sea ...


    By The Compliance Center (ICC)

  • Properties and Behavior of Fuels

    Fuel contaminants are generally nonhalogenated. Information presented for nonhalogenated VOCs and nonhalogenated SVOCs may also be appropriate for many of the fuel contaminants presented in this subsection. Contamination by fuel contaminants in the unsaturated zone exists in four phases: vapor in the pore spaces; sorbed to subsurface solids; dissolved in water; or as NAPL. The nature and extent ...

  • Gentle emptying of powder tankers

    Gericke of Switzerland has successfully designed a pneumatic conveying system for discharging delicate powders and granulates from road tankers, and has also introduced a similar system for unloading product from dry bulk container liners. Several other recent pneumatic conveying developments are also itemised. Retention of powder characteristics such as bulk density and particle size is ...


    By Gericke

  • Art or Science?

    The choice between dilute phase pneumatic conveying and flexible screw conveying is not always clear Everyone has rules of thumb when it comes to choosing a conveying system — rules based on bulk material characteristics, required flow rates and distances, source and destination, plant configuration, and other variables. But those with experience in all types of systems will tell ...


    By Flexicon Corporation

  • Weigh batching: the benefits of an automated system

    In many plants that batch-blend bulk products, weigh batching is a manual, time-consuming operation in which ingredients are weighed individually before being charged to a blender or other process vessel. A significant number of such plants could benefit from the installation of an automated weigh batching system. For small as well as large operations, an automated weigh batching system can pay ...


    By Flexicon Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you