burner Articles

  • Burner Efficiency

    The Customer The Company is a world leader in combustion technology. They design and manufacture burners for residential, commercial and industrial applications. The Process After the burners have been manufactured they must be tested to meet the standards of BTS-2000. This standard specifies the methods procedures for determining the performance and ...

  • WIRAJASA Waste Oil Burner

    Brief description on our patented Waste Oil Burner that was introduced in 2008. This innovative device works on two key principles namely pre-heating of waste oil and application of super-heated water or sub-critical steam to enhance the oxidation of heavy oil. Heating capacity of this burner is adjustable starting from 700,000 BTU/hour to 1,400,000 BTU/hour is suitable for various thermal ...


    By CV Wirajasa Teknik Industri

  • Case study - Burner products

    High Efficiency Infrared Burners The T4RAD product line is a high efficiency infrared burner line capable of meeting the needs of your unique application. The product can be made to order in many shapes and sizes. Our line of metal fiber burners has an operation range of 30,000 btu/hr/ft2 up to 250,000 btu/hr/ft2 in infrared mode. Blue Flame Premix ...


    By ABUTEC LLC

  • Biomass Burner Refractory Solutions

    Thermal Spalling of Refractory Material in Biomass Burner NW Ohio Biomass Burner Case Study Industry: Food Industry Description of Equipment: Biomass Burner Problem: General:Inside the Biomass burner there is.... ...

  • Are GAS-FIRED Burner Technologies Really The Best Choice for ISTR Cleanups?

    Its an exciting time. In-Situ Thermal Remediation (ISTR) shows great promise and has proven to be an extremely effective method for cleaning a wide range of Contaminants of Concern (COC’s) at contaminated sites. Most recently, gas-fired soil heating technologies are entering the market with promises of much cheaper natural gas heating, faster setup and heating times, less heaters required ...


    By Soil-Therm Equipment, Inc.

  • Thermal design and emissions of duct-burners for combined-cycle and cogenerative plants

    This paper mainly aims at demonstrating that an appropriate thermo-fluid-dynamic design optimisation of duct-burners for combined-cycle and cogenerative plants allows to satisfy restrictive emission limits, while significantly reducing the thermal stresses and the undesired pressure drops. In particular, a detailed discussion on the influence of the TEG composition and of the thermal load, ...


    By Inderscience Publishers

  • Low-Nox Burner retrofit Experiences in Cracking Furnaces at Dow, Terneuzen

    Abstract: Dow Benelux B.V. (Dow) operates three ethylene plants from the Netherlands, all based within its Terneuzen facility. In 2009, Technip Stone & Webster Process Technology (Technip) studied options to reduce the NOx emissions from the cracking furnaces of cracker 1. The results of this study, combined with the experience elsewhere within the Dow Chemical Company, have been used to ...

  • Waste-to-energy in Indonesia

    Brief description on Waste-to-energy technologies and particular equipment that the company has designed and manufactured. CV Wirajasa Teknik Industri is offering Waste Oil Burner and Biomass Combustion to replace conventional burners that utilize fossil fuel such as natural oil, synthetic lubricating oil, Biomass Combustion Chambers can be applied in sereal and nut drying, organic fertilizers ...


    By CV Wirajasa Teknik Industri

  • Case study - Landfill waste gas abatement

    For over 43 years Catalytic Products International has designed and manufactured specialized oxidation systems for use in controlling process-related VOC emissions. The QUADRANT-NRV Series Thermal Oxidation System is designed for use with the low-volume/high-BTU waste gas stream emitted from many landfill gas purification processes. As we utilize our Venturi Burner Package to process the waste ...

  • Evaluation of the optimum efficiency of fire tubes boilers

    Three-stage pirotubular boilers using gasoil C have been studied. Two boilers were connected in parallel. The data has been obtained by means of an analyser; its probe was connected at the exit of the boilers. The operation parameters considered were the injection pressure and the number of burners. As the emission of pollutants must be within the values prescribed by legislation, these are ...


    By Inderscience Publishers

  • Development of an energy efficient curtain flame ignition system for sintering of iron ore fines

    Research and Development Centre for Iron and Steel (RDCIS) of Steel Authority of India Limited (SAIL) has developed a 'curtain flame' ignition system for sinter mix ignition. Conventionally, either horizontal fired burners or top fired or a combination of both are used for ignition of sinter mix. These burners big in size but few in number are mounted on a rectangular box type furnace. This is ...


    By Inderscience Publishers

  • Vortex structure and heat transfer in a diffusion combustion field with circulating flow

    A numerical study was performed to examine the vortical structures for combusting flow from a two-dimensional bluff-body slot burner in the transitional recirculating flow. The numerical results support the flow visualisation results for C3H8 combustion by Chin and Tankin [Chin, L.P. and Tankin, R.S. (1991) 'Vortical structures in a 2-d vertical bluff-body burner', Combustion Science and ...


    By Inderscience Publishers

  • Optimizing The Operation And Material Selection For Fluorinated Waste Gas Incineration

    A thermal oxidizer system is used by Honeywell Specialty Chemicals to reduce organic and acid gas emissions from their fluoro-products plant. The thermal oxidizer system consists of a multi-gas fired vortex burner mounted on a vertical residence chamber. ...

  • Development of Low noise landfill gas flare

    Summary: Increasing requirements of the environmental standards and planning permission conditions create more challenges to the equipment providers. Environment Agency guidance demands low emission levels and local planners put low noise levels in their conditions for landfill sites. Achieving both at the same time with conventional equipment was found problematic. Biogas Technology has ...


    By Biogas Technology Limited

  • Focus Bioenergy No 7 2004: Biofuels - heating for the future

    Biofuels for heating of homes and properties is rapidly making headway. Environmentally friendly, comfortable and price-worthy small-scale heating with biofuels is done using pellets or briquettes. Changing an oil burner for a pellets burner or replacing electric heating with a pellet-burning stove is often very profitable. It demands less effort than wood firing but somewhat more work than using ...


    By Elmia AB

  • LATEST TECHNOLOGY: Low Fuel Cost PAINT BOOTH & INDUSTRIAL OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • LATEST TECHNOLOGY: Low Cost INDUSTRIAL OXIDIZER SYSTEMS

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • LATEST TECHNOLOGY: Low Cost PAINT BOOTH VOC OXIDIZERS

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • New Boliden Rönnskär Zinc Furnace - Case Study

    Rönnskär plant NEW BOLIDEN is the third largest copper metals supplier in Europe and handles all process stages from mining via smelting until recycling for copper, zinc and other valuable metals. The Rönnskär plant located in Skelleftehamn in northern Sweden houses one of the largest copper smelters of its kind in the world. Beside copper zinc, clinker, lead and precious ...

  • Gas Fired Oven

      INDUSTRIAL GAS FIRED OVEN   CONSTRUCTION An industrial Gas Fired Oven is typically of steel construction, comprised of inner and outer shells of sheet steel panels, separated by 4” thick, 6 lb/ft3 density mineral wool insulation.  The panels are constructed as to minimize metal-to-metal contact between inner and outer shells and reduce heat flow from ...


    By Epcon Industrial Systems, LP

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you