burner fuel Articles
-
Process Combustion Thermal Oxidisers - Tobacco Drying & Incineration Recuperative Thermal Oxidiser
Process Combustion have supplied several thermal oxidiser and process heater units for the tobacco processing industry. The thermal oxidiser provides heat into the tobacco drying loop using a recycle heat exchanger. An exhaust stream from the drying loop is supplied to the thermal oxidiser, where it reaches a temperature of 800°C to oxidise contaminents. Waste heat is also r ecovered to ...
-
Thermal Oxidizer - Dickinson Legg - Case Study
Project Details Customer Name: Dickinson Legg The Brief: Provide heat for drying tobacco products and oxidise waste gas. Location of Installation: China, Indonesia, Vietnam, South Korea, Turkey, Chile, Germany, Egypt Products supplied: Thermal Oxidiser and integrated Process Heater Project Duration: Typically 7 months The Solution Tobacco processing is a specialised and highly ...
-
Process Heater - Case Study
Project Details Customer Name: Centrica Storage The Brief: Provide heat for Rough storage field offshore rig Location of Installation: Rough Platform Products supplied: Water/Glycol Process Heater Project Duration: Typically 9 months The Solution Process Combustion was selected to provide a replacement heating medium heater for use on the Rough Storage off shore rig. The heater ...
-
LATEST TECHNOLOGY: Low Cost INDUSTRIAL OXIDIZER SYSTEMS
SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else: (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator, (3) VERY SMALL FOOTPRINT - - usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring controls. ...
-
LATEST TECHNOLOGY: Small PAINT BOOTH OXIDIZERS with Heat Recovery
SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else: (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator, (3) VERY SMALL FOOTPRINT - - usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring controls. ...
-
LATEST TECHNOLOGY: Low Cost PAINT BOOTH VOC OXIDIZERS
SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else: (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator, (3) VERY SMALL FOOTPRINT - - usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring controls. ...
-
LATEST TECHNOLOGY: Low Fuel Cost PAINT BOOTH & INDUSTRIAL OXIDIZERS with Heat Recovery
SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else: (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator, (3) VERY SMALL FOOTPRINT - - usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring controls. ...
-
LATEST TECHNOLOGY: Low NOx PAINT BOOTH & INDUSTRIAL OXIDIZERS with Heat Recovery
SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else: (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator, (3) VERY SMALL FOOTPRINT - - usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring controls. ...
-
New technologies for measuring the humidity of biomass
Methods applicable to a great variety of solid biofuels In recent years, systems have sprung up which use near infrared X-ray (NIR) spectroscopy, radio frequency (RF) and microwave spectroscopy as alternatives to the traditional method of measuring humidity by weight difference in the fuel burner. What these methods have in common is that they can be used for a great variety of solid biofuels, ...
-
Edson Pipeline Project— Alberta, Canada - Case Study
Project Details: Located at pipeline transfer station west of Edson, Alberta. 11,000 tons of impacted soil, from historical operations and spill events. Hydrocarbon Impacts: BTEX, VPH and LEPH. Active pipeline area with the pending expansion of Trans Mountain Pipeline. ...
-
Understanding Air Pollution Control System Design Specifications
As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many different companies will be required to install new or additional air pollution control equipment. With well over twenty-five years of proven success in a variety of industries, thermal and catalytic oxidation has become a popular method for controlling volatile organic compound (VOC) and ...
-
Combustion Of Heavy Fuels And Liquid Wastes
This paper describes the design and operating conditions of liquid and gas combustors for heavy fuels and liquid wastes. Lower fuel prices can be achieved by switching from light oil to heavy ones, or combining with unconventional waste fuels. Unconventional waste fuels such as energetic off gases and organic liquid waste require especially designed combustion equipment like a special combustor ...
-
Legacy Oil and Gas Location Hydrocarbon-Impacted Soil— British Columbia, Canada - Case Study
Project Details: Located in the Jedney gas field. ~175km northwest of Fort St. John, BC. 22,000 tons of impacted soli, from historical operations and spill events. Hydrocarbon Impacts: BTEX, VPH and LEPH. Abandoned location surrounded by forested public lands. ...
-
Catalytic Oxidizers…What You Should Know.
Within the U.S., depending upon specific plant operations, geographic locations, etc., many companies concerned with controlling VOC emissions have been operating air pollution control systems for years. However, due to business expansion, plant modifications or recent changes in EPA guidelines, an increasing number of companies are now finding it necessary to install new emission control ...
-
Turning wood chips and sawdust into a valuable solid fuel
RUF briquetting units are the economical solution for the processing of wood chips and sawdust. Where timber is planed, turned and sanded, manufacturers end up with large quantities of wood chips and sawdust. By briquetting this material, you can recover a valuable solid fuel. Where large quantities are produced, the single briquette pressing system developed by RUF GmbH is the most economical ...
-
Regenerative Thermal Oxidizers…What You Should Know.
Within industry today, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new. In response to Congressional guidelines passed in the 1970’s, a number of companies with VOC emissions have been operating air pollution control systems of one type or another for 25 years or more. These guidelines have been revised and added to as the years progressed, making ...
-
A Breath of Fresh Air
As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment. With decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions. During the past 25+ years, industry has made progress in cleaning ...
-
Single-valve RTO Eliminates Odors and VOC
Untitled Document Less expensive to purchase, install, and operate compared to multiple chamber units, this single rotary valve thermal oxidizer helps maintain this grinding wheel manufacturer's good neighbor policy. Single-valve RTO Eliminates Odors and VOC ...
-
3 High Payback Oxidizer Retrofits for Lean Budgets
2020 has been the year many manufacturers have had to pivot into to the unknown. Your pollution control equipment must be considered as you make key business decisions. Whatever your new business landscape, Anguil is ready to assess your current equipment, production requirements, and capacities to develop a strategy that meets your emerging business needs. Have you had to make any of these ...
-
Reasons Why Routine Borescope Inspections Are Important
Borescope inspections are an important part of any maintenance routine. They improve safety while saving time and money. Borescopes, also called videoscopes, offer an excellent way to inspect the internal components of aviation, as well as other turbine engines. They can help to diagnose problems, but they are also well-placed as part of routine maintenance tasks. Preventive maintenance can be ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you