burner line Articles

  • Burner Efficiency

    The Customer The Company is a world leader in combustion technology. They design and manufacture burners for residential, commercial and industrial applications. The Process After the burners have been manufactured they must be tested to meet the standards of BTS-2000. This standard specifies the methods procedures for determining the performance and ...

  • Case study - Burner products

    High Efficiency Infrared Burners The T4RAD product line is a high efficiency infrared burner line capable of meeting the needs of your unique application. The product can be made to order in many shapes and sizes. Our line of metal fiber burners has an operation range of 30,000 btu/hr/ft2 up to 250,000 btu/hr/ft2 in infrared mode. Blue Flame Premix ...


    By ABUTEC LLC

  • 8 Types of Businesses that Can Save BIG with a Waste Oil Heater

    Besides the attraction of their environmentally-friendly attributes, waste oil heaters are emerging as a “must have” for certain types of businesses for an even more compelling reason: A waste oil furnace can literally convert an otherwise worthless by-product into substantial savings on energy costs. So, if you’ve got a business that generates used petroleum products in your ...


    By Clean Energy Heating Systems

  • European Oil and Gas from Exploration to End User

    Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...

  • Intermediate Reynolds/Peclet number, flat plate boundary layer flows over catalytic surfaces for micro-combustion applications

    The reactive, flat plate boundary layer flow of close-tostoichiometric, methaneair mixtures over small size Pt plates is studied experimentally for intermediate Reynolds and Peclet numbers which pertain to micro-combustion applications. The surface temperature was measured with infrared thermography and correlated to reactant concentration profiles acquired with line-Raman imaging. Three phases ...


    By Inderscience Publishers

  • Applications guide to mass flow measurement in the power industry

    Precise, timely measurement of air, fuel, and gases is one way today's utilities can take action to protect themselves against rising costs and comply with increasingly stringent environmental requirements. Sierra thermal mass flow meters and control systems are designed expressly to fill these needs. They can make utilities more cost-effective in a variety of applications: Real-Time Fuel Line ...


    By Sierra Instruments, Inc.

  • 7 Questions You Should Ask a Waste Oil Furnace Salesperson Before You Buy

    As with any other business purchase, you should do your homework before making the decision to buy a waste oil furnace. Any open, honest salesperson from a reputable company will be happy to inform and educate you on what you can expect from installing a waste oil burner in your facility. Being in the know to make an empowered buying decision is your first step to gaining the cost-savings and ...

  • Tuning Your Boiler for Fuel Savings – Out with the Old in with the New Technology

    The USA has about 811,000 MW of installed generation and over 52% of our Electric power is produced by aging coal fired power plants. The average utility boiler furnace was designed about 30-40 years ago. According to DOE records, the average boiler in 1974 was fired with 80% bituminous coal. Now, western PRB coal is much more prevalent and represents about 50% of total coal ...

  • SOCAVER Thermal Gas Supply - Case Study

    SOCAVER (Société Camerounaise de Verrerie) is a subsidiary of the leading Cameroon brewery, SABC (Société Anonyme des Brasseries du Cameroun). SOCAVER, which is the only glass factory in the Central Africa region, blew its first bottle on 1 July 1970 and today supplies a host of African countries with its products. Specialising in the manufacture of hollow glass, ...


    By Victoria Oil & Gas Plc

  • APPLICATION OF H-VARB TECHNOLOGY TO IMPROVE COAL FLOW BALANCE AT NANTICOKE GENERATING STATION

    ABSTRACT The power generation industry is constantly challenged with the need to improve the emissions and heat rate performance of their assets. In the case of pulverized coal fired units, poor fuel balance at the burners is a relatively common issue that impedes efforts for combustion optimisation. The problem of fuel imbalance is particularly acute on units that employ splitting devices ...


  • Case study - Organic particulate filtration

    Overview A food products company that mixes various types of waxes and other components to make the base for chewing gums was faced with the issue of cleaning up a slightly odorous, visible emission being exhausted from two of their process lines. The components of the emission were hot particles of chewing gum and some volatile organic compounds (VOC's). The particles would quickly clog ...

  • Update on the homeowner heating oil safety bill

    All homeowners in Massachusetts should be aware that on December 29, 2008, the State Senate enacted the long-awaited Homeowner Heating Oil Safety Bill as Chapter 453 of the Acts of 2008. It required homeowners to upgrade their existing oil heat supply line and insurance companies to offer coverage for a spill by July 1, 2010. On January 5, 2009, it was signed by the Governor. On June 30, 2010, a ...


    By Penney Engineering, Inc

  • Maxsys Fuel System generates 6% savings on Gas Fired Steam Raising Boilers at Mondi Packaging

    Mondi is one of the world’s leading international paper and packaging groups with a substantial global presence, employing 34,000 people at 112 sites across 34 different countries. The company is continually striving for a consistent high level of improvement in environmental performance in all its operations, making efficient use of raw materials and energy, while focusing on innovation ...


    By Maxsys Fuel Systems Ltd

  • Wood waste case study - Jukes Holdings

    The MD of a group of independent coffin manufacturers has seen the light in recycling wood waste, and is saving thousands of pounds in waste disposal charges and heating costs by rolling out wood waste heaters across his companies. Stewart Jukes, MD of Jukes Holdings Ltd was so impressed with a wood waste heater purchased for one of his companies, Brian Reid & Son in Scotland, that he has ...


    By Wood Waste Technology Ltd

  • Case study - How to properly maintain and service your oxidizer

    Your air pollution control system represents a significant investment in not only initial capital but also ongoing maintenance and operation. Routine inspections performed by your staff combined with thorough maintenance plans provided by Anguil Environmental Service Technicians will ensure you get the most from your investment over the entire life of the system. Anguil has almost three decades ...

  • Frequency Converter energy savings on Boilers

    Boilers and heaters account for a significant share of a plant's purchased fuel cost. Combustion air fans are necessary to provide enough combustion air to the boiler or heater's burner system. Louvers, inlet guide vanes or frequency converters control the amount of air allowed into a boiler. Configuring a combustion air fan to allow the proper amount of air into the burner can improve boiler ...


  • Case Study - Coating / Hot Foil Stamping

    Problem: Start-up company needed emission control with low capital and operating costs.  Equipment: Catalytic Recuperative Oxidizer                   12,000 scfm capacity (1994 vintage)                   Installed: Fall 2003                   Location: New Jersey   Project Details:The founders of this start-up had extensive ...


    By Kono Kogs, Inc.

  • Forces attracted to fuel savings

    Magnatech Fuel Conditioning Limited have recently completed a contract to install their very powerful magnetic fuel conditioning units to all structural gas and oil burning equipment across five MOD bases in England. This was after research concluded that Magnatech was the most cost effective provider of this type of application.The MOD have used this technology previously, when a number of bases ...

  • Case study - Custom web coater chooses the VECTOR Catalytic Oxidizer

    A custom web coating facility recently installed a VECTOR-Series Catalytic Oxidizer to eliminate the VOC emissions exhausted from three different coating lines. After an extensive technology review the VECTOR Catalytic Oxidizer was installed because it offered the highest reliability, lowest installed cost, and lowest operating costs. The application called for a system that could provide ...

  • What Should be Noted when Using a Rotary Kiln?

    Rotary kiln for sale is the core of the whole cement production line and the technical management plays a vital role in the stable and continuous operation of rotary kiln. Here Kefan Machinery gives a summary to the possible failure and solutions in ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you