burner monitor Articles

  • Burner Efficiency

    The Customer The Company is a world leader in combustion technology. They design and manufacture burners for residential, commercial and industrial applications. The Process After the burners have been manufactured they must be tested to meet the standards of BTS-2000. This standard specifies the methods procedures for determining the performance and ...

  • Monitoring Air/Fuel Mixtures in Glass and Glass Fiber Manufacturing case study

    Measurement of Premix Gas. To produce the desired flame in a glass forehearth or when making fiberglass (glass fiber) insulation, an air/fuel pre-mixer is used. The pre-mixer combines compressed natural gas or propane with air and this mixture is then piped to the process burners At the burner, a fuelrich or fuel-lean flame is produced depending on the air/ fuel ratio selected. In many ...

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


  • NOx in Non-Utility Industries - Part I NOx in Non-Utility Industries - Part I - Air emission origins, best control solutions and monitoring methodology for nitrogen oxides

     Problems with reducing nitrogen oxides (NOx) are widespread in the general process industries. These industries, together with medium size utility and power generators contribute about 15 percent of global NOx emissions. The emission sources addressed include various heaters employed in chemical and petrochemical plants, nitric and sulfuric acid plants, glass furnaces, iron and steel mills, ...


  • LATEST TECHNOLOGY: Low Fuel Cost PAINT BOOTH & INDUSTRIAL OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • LATEST TECHNOLOGY: Low Cost INDUSTRIAL OXIDIZER SYSTEMS

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • LATEST TECHNOLOGY: Low NOx PAINT BOOTH & INDUSTRIAL OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • LATEST TECHNOLOGY: Small PAINT BOOTH OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • LATEST TECHNOLOGY: Low Cost PAINT BOOTH VOC OXIDIZERS

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • New Boliden Rönnskär Zinc Furnace - Case Study

    Rönnskär plant NEW BOLIDEN is the third largest copper metals supplier in Europe and handles all process stages from mining via smelting until recycling for copper, zinc and other valuable metals. The Rönnskär plant located in Skelleftehamn in northern Sweden houses one of the largest copper smelters of its kind in the world. Beside copper zinc, clinker, lead and precious ...

  • Redundant combustion plant for Novartis

    Type     HOFGAS®- IFM4c/2200/1500/60/180 Commissioning     2004 Site     Novartis (Basel, CH) Situation In order to prevent production failure due to missing redundancy in the flue gas clean up, Novartis required an additional system. During different production processes exhaust air load with organic components is formed. ...


    By Hofstetter BV

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Expansion of waste water treatment plant, Switzerland

    Type     HOFGAS®- IFL2c Commissioning     2005 Site     WWTP Bern (Berne, Switzerland) Initial Situation The purification services provided by WWTP Region Bern so far are no longer adequate. The expansion project comprises new constructions, the new organic waste water treatment stage and the associated sludge liquor ...


    By Hofstetter BV

  • High Temperature Combustion of Biogas

    High Temperature Combustion of Biogas Efficient combustion of biogas Controlled and concealed combustion Combustion temperature > 900°C Residence time more than 0.3 s Insulated combustion chamber High safety standard The HOFGAS® - IFL4c high temperature flare provides safe and environmentally-friendly combustion of biogas. The exhaust gas ...


    By Hofstetter BV

  • Maxsys Fuel System generates 6% savings on Gas Fired Steam Raising Boilers at Mondi Packaging

    Mondi is one of the world’s leading international paper and packaging groups with a substantial global presence, employing 34,000 people at 112 sites across 34 different countries. The company is continually striving for a consistent high level of improvement in environmental performance in all its operations, making efficient use of raw materials and energy, while focusing on innovation ...


    By Maxsys Fuel Systems Ltd

  • Biomass gassing as an effective source of energy

    Type     HOFGAS®- IFM4c 4000/2100 Performance     2100 Nm3/h / 3500 kW          Location     Limoges (FR) Situation A prestigious gassing plant for biomass is being built in the heart of France. The owner is promising himself a significantly higher level of efficiency through ...


    By Hofstetter BV

  • Zoo-technical application of Ground Source Heat Pumps: a pilot case study

    Ground Source Heat Pumps are energy-efficient HVAC systems usually adopted in residential and commercial buildings. However the control of the thermal environment is required not only in spaces occupied by people, but also in intensive breeding farms, in order to maintain healthy conditions and to increase productivity. In the Italian livestock breedings, heating is usually provided by means of ...


    By Tethys srl

  • Union Papertech Ltd. save 6.8% gas using the Maxsys Fuel Systems

    A large Northwest paper mill has installed Maxsys Fuel System technology saving 6.8% off their energy bill and this has inspired them to place new orders with Maxsys for other applications. Union Papertech located at Simpson Clough, Lancashire, is part of the Purico Group, a 4,500-employee organisation with a global presence. Through its policy of continuous investment in the latest technology, ...


    By Maxsys Fuel Systems Ltd

  • Case study - Spindle utilities module

    Business Situation The existing method of tracking utility usage at these industrial laundries was highly manual, unreliable, and time consuming. Total utility consumption from bills was entered into large spreadsheets and analyzed over periods that were often 3 months or more in arrears. The report merely told managers what they already knew—they had overspent on natural gas; ...


    By Dober Chemical Corp

  • Low emissions from large plants too

    Type     HOFGAS®- LPM 3000 Performance     3’000 Nm³/h, 15’000 kW Location     Scotland (GB) SituationEvery year, 150’000 tonnes of waste from Edinburgh, Lothian and the Borders Region are brought to the Dunbar landfill site. The waste is transported by rail to the site. In 2002, the UK Environmental Agency ...


    By Hofstetter BV

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you