calibration gas cylinder Articles

  • Commonly Asked Questions About Calibration Gas

    Argus-Hazco's Becky Schneider answers the most commonly asked questions about calibration gas. The questions range from disposal and refilling protocol to shelf life to MSDS availability. Argus-Hazco offers a complete line of reactive and non-reactive gases in cylinder sizes that range from 17 to 221 liters. We have a large collection of common blends and we can also accommodate virtually any ...


    By Argus-Hazco

  • Environics - Reducing calibration gas cost by up to 60%

    EPA's appendix 'M' 40 CFR 51 reduces calibration gas cost by 60%By: Terrence P. Dunn, President of EnvironicsOn May 30, 1995, the EPA published the final version of Method 205 for inclusion in Appendix M of 40 CFR Part 51 entitled, 'Verification of Gas Dilution Systems for Field Instrument Calibrations.' Continuous emissions monitoring systems (CEMS) require ...


    By Environics, Inc.

  • Sonic nozzles for gas calibrators, when simplicity provides accuracy!

    Gas analyser’s calibration is a task required in many applications according to either legislation or quality systems management. This is the case for Air Pollution Monitoring or Continuous Emissions Monitoring devices installed in cabinets, for continuous analysis in remote locations. Measurements in traces range are performed and analytical devices specifications need to be validated and ...


    By LNI Swissgas

  • The Cost of Inaccurate CEM Calibration Gases

    Utility companies and other users of Continuous Emissions Monitoring (CEM) calibration gases often mistakenly consider them a commodity, making price the primary purchase consideration. Consequently, many are willing to settle for calibration gases that are ...

  • Measuring moisture content in medical oxygen cylinders - Case Study

    Since 2003, Medical Gas Solutions Ltd (MGS) based in North Wales have been providing medical gases and devices to the Healthcare Industry nationwide. In 2012 they expanded their product portfolio to include industrial gases. MGS design and manufacture lightweight, high pressure valve, medical oxygen cylinders for the ambulance service, hospitals, medical centres and other emergency services. In ...


    By Systech Instruments Ltd

  • Gas safety in confined spaces

    An engineer repairs buried cables; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face a common danger, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited.  ...

  • Gas Safety in Confined Spaces

    Introduction An offshore worker ensures a vessel is safe to enter; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face common dangers, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited. A confined space ...

  • Gas detector communication technology for offshore oil and gas platforms

    In few applications is safety as important as on offshore oil and gas platforms. Explosive hazards from hydrocarbon gases and vapours are an ever-present risk, whilst toxic hydrogen sulphide gas and depleted oxygen environments can pose significant risks to personnel. Gas detectors are therefore essential to provide dependable early warning of gas hazards. Gas detectors are permanently installed ...

  • Chlorine Dioxide gas detection: A comprehensive guide

    Introduction Some years agoago, the bleaching process in the paper industry was changed from using Chlorine (Cl2) as bleaching agent to Chlorine dioxide (ClO2). This was a challenge forThis posed a major challenge to industrial hygienists, as there were no sensors or detectors available that were specific to Chlorine dioxide: There was no sensor technology for gas detectors available that ...

  • A Guide to Gas Detector Tubes. Your Questions Answered

    Gas detector tubes are easy to use, are low cost, and the method is intrinsically safe, allowing it to be deployed in all industries. Because detector tubes don’t require calibration, users see the benefits of this technology over electronic gas detectors due to their ease of ...


    By a1-cbiss

  • Multiple gas impurity analyses and verification for semiconductor process tools

    With the increased emphasis on the purity of cleaning, etching and treatment gases by the semiconductor industry, advanced analysis instrumentation is required to monitor the electronic specialty gases and to verify the performance of process tools and components. This paper describes new instrumentation and software specifically designed to accomplish ppb level gas analyses in times as short as ...


    By CIC Photonics, Inc.

  • Cost Containment: Beyond the Obvious

    Utilities today can implement a number of different initiatives to help them contain costs and maximize profits. Some of those, such as switching to a more efficient fuel source if possible, can produce obvious results that are relatively easy to calculate. But there are other initiatives, though less obvious, that can produce significant results at the bottom line. One such cost-containment ...

  • CIRAS-2 User Recalibration of CO2 and H2O

    The CIRAS-2 CO2/H2O analyzer is an inherently stable instrument and does NOT require frequent calibration. The AutoZero function corrects for nearly all changes that result in calibration drifts. The most common causes of drifts in CIRAS-2 readings are i) incorrect Zeros due to exhausted chemicals or ii) leaks on the desiccant columns from rolled or damaged o-rings and iii) incorrect Diff Bal, ...


    By PP Systems

  • How Accurate is Your Monitor?

    When you consider the many regulations and guidelines that health and safety officers and first responders are faced with, it is amazing they maintain the ability to detect such a wide variety of hazardous pollutants and toxic agents.  There is no lack of regulations governing how to monitor chemical compounds, and the list grows longer all the time.  New standards for portable gas ...

  • Determination of TOC in stack through the innovative FID analyser easy to carry - Case Study

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyzer which uses hydrogen and other reference gases in ...


    By Pollution Srl

  • Increased Demand for PureAire’s Oxygen Monitor for Nitrogen and Helium Storage

    When storing or using Liquid Nitrogen, Helium, CO2, or Argon cylinders in a confined space, what are the potential risks? Gas leaks are the most common, requiring the need for an oxygen deficiency monitor for protecting employees in the workplace.  With inert cryogenic gases, loose or broken fittings can leak gas into a room displacing oxygen, causing impaired judgment or loss of life to ...

  • Texas Instruments - A Novel Separation Technique for the Analysis of Trace Levels of Atmospheric Contaminants in Inert Semiconductor Process Gases

    A NOVEL SEPARATION TECHNIQUE FOR THE ANALYSIS OF TRACELEVELS OF ATMOSPHERIC CONTAMINANTS IN INERTSEMICONDUCTOR PROCESS GASES J. Scott McWilliams, Alan Johnson, Charlene Long, Jeremiah D. Hogan*Texas Instruments, Inc.Dallas, TX 75265 Low ppb detection limits for contamination in cylinder gases have been achieved with gas chromatography using a modified gas ...


    By Environics, Inc.

  • Field Detection of Chlorinated Alkenes in Well Water using the FROG-4000 Portable GC - Case Study

    Introduction Defiant’s FROG 4000, a portable GCPID system, was used to identify and determine the concentration of chlorinated alkenes in several extraction wells located in Tacoma Washington. Split samples were taken at each well and sent to an offsite lab for analysis. This case study examines the field exercise and highlights the high degree of agreement between the offsite lab and ...


    By Northern ANI Solutions Ltd.

  • Online Odors Monitoring in Waste Water Treatment Plants

    Odors are very distinct air contaminants as they generate nuisances (see note at the end). The factors playing a role in the determination of odor annoyance are : odor concentration and intensity, frequency, appreciation, duration, synergy and location. Chromatotec proposes an automated solution to well identify the origin and the level of odors. Technology Description We offer a ...


    By Chromatotec Group

  • Read about Confined Space in Construction and Atmospheric Testing Right Here!

    In 1993, 29 CFR 1910.146 went into effect as the first federal legislation governing entry into permit-required confined spaces in general industry. Because some industries, such as the construction industry, were covered by specific Occupational Safety and Health Administration (OSHA) safety regulations, they were exempt from the confined space entry requirements of the general industry rule. ...


    By Argus-Hazco

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you