calibration gas disposable Articles

  • Commonly Asked Questions About Calibration Gas

    Argus-Hazco's Becky Schneider answers the most commonly asked questions about calibration gas. The questions range from disposal and refilling protocol to shelf life to MSDS availability. Argus-Hazco offers a complete line of reactive and non-reactive gases in cylinder sizes that range from 17 to 221 liters. We have a large collection of common blends and we can also accommodate virtually any ...


    By Argus-Hazco

  • Oxygen (O2) Monitors: Disposable Sensors eating your Cash? PureAire Introduces 10 + Year Sensor.

    PureAire Monitoring Systems is a leading manufacturer in the gas monitoring industry. When it comes to O2 deficiency monitors PureAire makes the most reliable, longest lasting, and affordable oxygen monitors. It has been an international standard for the past three decades to use oxygen monitors with disposable sensor cells, (electrochemical sensors). All disposable sensors require frequent ...

  • Gas safety in confined spaces

    An engineer repairs buried cables; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face a common danger, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited.  ...

  • PureAire O2 Monitor for Food Manufacturing Tunnel/Freezers with N2 and CO2: Using a 10 Year No Calibration Sensor

    For flash freezing nothing beats a liquid nitrogen or carbon dioxide immersion or tunnel style freezer for efficiency, overall performance, and cost savings. If you haven't yet switched to an immersion freezer, doing so now could position you to better compete in your market segment and save money over time. Learn more about why these freezers are a must for frozen food manufacturers. ...

  • Gas Safety in Confined Spaces

    Introduction An offshore worker ensures a vessel is safe to enter; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face common dangers, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited. A confined space ...

  • Danger and Detection of Hydrogen Sulphide Gas in Oil and Gas Exploration and Production

    A rig worker smells rotten eggs near the well head, rubs his itchy eyes as he investigates the frosty pipe connections. After a few moments, he believes all is fine as he no longer smells the tell-tale hydrogen sulphide odour. In this scenario, we can only hope the worker recognises the danger and quickly leaves the site. Oil fields, especially mature ones, can produce hydrogen sulphide gas ...

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • A Guide to Gas Detector Tubes. Your Questions Answered

    Gas detector tubes are easy to use, are low cost, and the method is intrinsically safe, allowing it to be deployed in all industries. Because detector tubes don’t require calibration, users see the benefits of this technology over electronic gas detectors due to their ease of ...


    By a1-cbiss

  • Gas analysers support management of Swindon fire

    The capability to convene a multi-agency Air Quality Cell (AQC) was established in England in 2009 following the Buncefield Oil Storage Depot incident. A review of this event identified the need to rapidly co-ordinate the acquisition, analysis and interpretation of air quality data in major incidents. Arrangements have been made in England to bring together experts from the Environment Agency ...


    By Quantitech Ltd

  • Inno-badge – an electronic dosimeter badge for continuous recording of a worker`s exposure to Phosgene gas

    Untitled Document Phosgene, also known as Carbonyl Chloride, is a widely used but highly toxic substance. At room temperature Phosgene gas is nearly colourless, and at low concentrations ...


    By Baum Publications Ltd.

  • Continuous on-line monitoring of dissolved oxygen in the activated sludge of a sewage treatment plant

    Dissolved oxygen is traditionally measured using a Clark cell, which relies upon a gas-permeable membrane for its opera-tion. Such sensors are subject to fouling with subsequent loss of accuracy, making frequent maintenance and calibration necessary. The objective of this development was to take advantage of specific properties of microelectrode arrays, such as low flow-dependence, insensitivity ...


  • SMS alerts with AEMS on Cory Envrionmental landfill site case study

    Application Landfill gas monitoring Equipment AEMS Location United Kingdom Customer Cory Environmental Requirement The customer was looking for a ‘smart’ gas monitoring system to continuously monitor landfill gas concentrations and pressure and ...


    By Geotech

  • Unmanned remote and wireless CDM monitoring case study

    Remote and wireless monitoring technology to meet CDM requirements is in its infancy in Europe. Carbon trading is driving it globally, especially in North and South America. That experience and technology is now finding a demand in Europe and Asia in landfill, biogas from food and animal waste in digesters and water treatment sludge digestion. Methane recovery from landfill and anaerobic ...


    By Geotech

  • Case study - Biogen Greenfinch Westwood

    Non-stop clean power generation uses smart machines and state-of-the-art technology to help keep running. Keep it simple - and to keep it profitable, keep CHP engines running. That's just part of the formula for success at the BiogenGreenfinch-designed and run Westwood anaerobic digestion (AD) plant in Northamptonshire. Built and funded by parent company Bedfordia Group plc this £10 ...


    By Geotech

  • CDM monitoring & reporting for carbon credits case study

    Abridged from a Wastecon 2008 Presentation and Paper by Mitchal L. Cassel LANDTEC, Colton, California The project sites The project is in Brazil and obtains certified emission reductions (CER) or carbon credits for a large scale, waste handling and disposal, clean development mechanism (CDM) project. Methane emissions are being reduced through collection and destruction of ...


    By Geotech

  • PureAire Makes Oxygen Monitor for Nitrogen Generators

    Nitrogen generators are most commonly used in areas where on-demand nitrogen is preferred rather than, storing liquid nitrogen (LN2) in cylinders.  Nitrogen generators have a lower cost of operation, and can be used where smaller amounts of nitrogen are needed. Nitrogen generators are used in the pharmaceutical industry, testing laboratories, cryogenic facilities, welding manufactures, and ...

  • Case study - TPH Oil & Grease applications

    These case studies illustrate the performance generated from customers who have used Sitelab’s UVF-3100 analyzer for testing total petroleum hydrocarbons in the C10 to C50 range. Sitelab’s TPH-Oil calibration kit is designed to correlate well to laboratory “Oil and Grease” test methods. This includes EPA Methods 1664 and 9071B by Gravimetric, EPA Method 418.1 by Infrared ...


    By Sitelab Corporation

  • Oxygen Monitors for the New Millennium

    Oxygen monitors have become a required piece of safety equipment for many industrial and laboratory environments, where the release of certain toxics can create an area unsafe for living beings (human or animal).  When making a purchasing decision on any oxygen detection monitor, one need look no further than the sensor cell found at the heart of the monitor.  While each oxygen ...

  • Oxygen (O2) Monitor for MRI Rooms: PureAire Sells a Hassle Free 10+ Year Oxygen Monitor.

    Magnetic Resonance Imaging (MRI) facilities have the same thing in common, helium. Helium is used as part of the cooling process for a MRI magnet. PureAire Monitoring Systems Oxygen Monitors are becoming the newest safety product amongst MRI users, thanks to its 10 + year sensor. PureAire’s sensors do not require maintenance, or require replacement parts. Helium is a nontoxic, odorless, ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you