calibration gas generator Articles

  • Environics - Reducing calibration gas cost by up to 60%

    EPA's appendix 'M' 40 CFR 51 reduces calibration gas cost by 60%By: Terrence P. Dunn, President of EnvironicsOn May 30, 1995, the EPA published the final version of Method 205 for inclusion in Appendix M of 40 CFR Part 51 entitled, 'Verification of Gas Dilution Systems for Field Instrument Calibrations.' Continuous emissions monitoring systems (CEMS) require ...


    By Environics, Inc.

  • Sonic nozzles for gas calibrators, when simplicity provides accuracy!

    Gas analyser’s calibration is a task required in many applications according to either legislation or quality systems management. This is the case for Air Pollution Monitoring or Continuous Emissions Monitoring devices installed in cabinets, for continuous analysis in remote locations. Measurements in traces range are performed and analytical devices specifications need to be validated and ...


    By LNI Swissgas SA

  • Validation and calibration of a spectroscopic technique for determination of gas plume temperature

    Abstract Results are reported from a continuing program of research into the physics and spectroscopy of heated stack plumes. Simultaneous thermocouple and spectrometer measurements are used to study sideways—directed plumes from an internal combustion engine and a propane-burning plume generator. A previously-reported result, that the ratio of optically thin signals from two CO2 ...


    By D&P Instruments, Inc

  • Primary Standard Gas Flow Calibration—The Only Guarantee of Accuracy

    At Sierra, we have a saying: “An instrument’s accuracy is only as good as its calibration.” The accuracy of your mass flow controller (MFC) is essential in assuring the efficiency, performance, and quality of your flow meter. In many cases, if your instrumentation is not calibrated, then a decline in performance is possible due to ...


    By Sierra Instruments, Inc.

  • 5th-Generation Thermox WDG Flue Gas Combustion Analyzer

    "For more than 40 years, we have been a leader in combustion gas analysis," says Mike Fuller, divison VP of sales and marketing and business development for Ametek Process Instruments, "and we believe the WDG-V is the combustion analyzer of the future." WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as ...

  • A simple radon chamber for use with soil gas for calibration of radon measuring devices and instruments

    A simple and easy to use radon calibration chamber of volume of 216 litres was designed and constructed for applications in calibration of radon measuring devices and for research studies. The main advantage of this chamber is that instead of using 226Ra source to generate the 222Rn inside the chamber, ...


    By Inderscience Publishers

  • Gas Distributors and Specialty Gas Suppliers are the Key to Technology Companies

    The technologies that power laptops, smartphones, LED televisions, and other technologies rely on one hidden ingredient: Gas. Compressed and inert gases help create a pure environment, control the temperature, and carry other substances for a high-quality end product. See how the different gases used play a pivotal role in technology product development and also how they introduce health and ...

  • Gas detector communication technology for offshore oil and gas platforms

    In few applications is safety as important as on offshore oil and gas platforms. Explosive hazards from hydrocarbon gases and vapours are an ever-present risk, whilst toxic hydrogen sulphide gas and depleted oxygen environments can pose significant risks to personnel. Gas detectors are therefore essential to provide dependable early warning of gas hazards. Gas detectors are permanently installed ...

  • SPGAS: Specialty gas analysis software

    About SPGAS SPGAS is a user-friendly, turnkey FTIR software package designed specifically for the analysis of gaseous constituents. While providing all of the control features of a standard FTIR software package for Bomem spectrometers, SPGAS also provides the ability for 24/7/365 operation of the IRGAS analysis package. SPGAS is designed to save spectral files from each day of ...


    By CIC Photonics

  • Gas safety in confined spaces

    An engineer repairs buried cables; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face a common danger, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited.  ...

  • Gas Safety in Confined Spaces

    Introduction An offshore worker ensures a vessel is safe to enter; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face common dangers, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited. A confined space ...

  • NovaGerar landfill gas to energy project

    Overview The objective of the NovaGerar Landfill Gas to Energy Project in Nova Iguaçu - Rio de Janeiro, Brazil is to explore the landfill gas (LFG) collection and utilization activities of the landfills managed by S.A. Paulista. This involves investing in a gas collection system, leachate drainage system and a modular electricity generation plant at each landfill site (with expected ...

  • PureAire Makes Oxygen Monitor for Nitrogen Generators

    Nitrogen generators are most commonly used in areas where on-demand nitrogen is preferred rather than, storing liquid nitrogen (LN2) in cylinders.  Nitrogen generators have a lower cost of operation, and can be used where smaller amounts of nitrogen are needed. Nitrogen generators are used in the pharmaceutical industry, testing laboratories, cryogenic facilities, welding manufactures, and ...

  • Hydrogen-cooled electric generators case study

    Application Moisture contamination is measured in the hydrogen gas used to cool large stationary electric generators. Problem Hydrogen is used to cool the bearings and other rotating parts of large stationary electric generators. Hydrogen is the best choice for a cooling gas because of its unique combination of high thermal conductivity and low viscosity. In ...

  • Danger and Detection of Hydrogen Sulphide Gas in Oil and Gas Exploration and Production

    A rig worker smells rotten eggs near the well head, rubs his itchy eyes as he investigates the frosty pipe connections. After a few moments, he believes all is fine as he no longer smells the tell-tale hydrogen sulphide odour. In this scenario, we can only hope the worker recognises the danger and quickly leaves the site. Oil fields, especially mature ones, can produce hydrogen sulphide gas ...

  • Integration of mathematical and physical simulation to calibrate car-following behaviour of unimpaired and impaired drivers

    Traffic patterns can be modelled by mathematical microsimulation. People can be modelled by driving simulators that resemble flight simulators. This paper shows how driver car-following behaviour from driving simulators can be transferred to traffic microscopic simulation. We capture driver behaviour through physical driver simulator experiments. Subjects holding cell phone conversations while ...


    By Inderscience Publishers

  • Advances in Thermal Dispersion Mass Flow Meters - Part 2 Installation and Flow Calibration

    Abstract Part 1 of this two-part series describes the principle of operation of a new microprocessor-based thermal dispersion mass flow meter that uses four temperature sensing elements in its flow sensor and has a dry velocity sensor. Part 1 shows how this unique system provides automatic management of changes in gas selection, gas temperature, gas pressure, and outside temperature. This ...


    By Sierra Instruments, Inc.

  • CO2 Gas Hazards in the Brewing Industry

    The hazards associated with CO2 in the brewing industry are well known, yet people still die needlessly every year in tragic and completely avoidable accidents in breweries. Just last year in Germany, which has a good safety record, two workers died in separate incidents at the same brewery. In the first incident, the owner was found dead with his head and torso in a beer mixing tank. It is ...

  • Learining how to Choose Materials for Gas Valves

    The materials and the quality of gas valves are so important that their disqualification will lead to leakage in-or-outside the body of the valve. If the strength, rigidity and overall performance of the components of the valve body cannot meet the requirements or even break, it will result in the spillage of gas and explosion. Therefore, material and quality are the most critical part during the ...

  • Chlorine Dioxide gas detection: A comprehensive guide

    Introduction Some years agoago, the bleaching process in the paper industry was changed from using Chlorine (Cl2) as bleaching agent to Chlorine dioxide (ClO2). This was a challenge forThis posed a major challenge to industrial hygienists, as there were no sensors or detectors available that were specific to Chlorine dioxide: There was no sensor technology for gas detectors available that ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you