calibration gas regulator Articles

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • Commonly Asked Questions About Calibration Gas

    Argus-Hazco's Becky Schneider answers the most commonly asked questions about calibration gas. The questions range from disposal and refilling protocol to shelf life to MSDS availability. Argus-Hazco offers a complete line of reactive and non-reactive gases in cylinder sizes that range from 17 to 221 liters. We have a large collection of common blends and we can also accommodate virtually any ...


    By Argus-Hazco

  • Primary Standard Gas Flow Calibration—The Only Guarantee of Accuracy

    At Sierra, we have a saying: “An instrument’s accuracy is only as good as its calibration.” The accuracy of your mass flow controller (MFC) is essential in assuring the efficiency, performance, and quality of your flow meter. In many cases, if your instrumentation is not calibrated, then a decline in performance is possible due to ...


    By Sierra Instruments, Inc.

  • Sonic nozzles for gas calibrators, when simplicity provides accuracy!

    Gas analyser’s calibration is a task required in many applications according to either legislation or quality systems management. This is the case for Air Pollution Monitoring or Continuous Emissions Monitoring devices installed in cabinets, for continuous analysis in remote locations. Measurements in traces range are performed and analytical devices specifications need to be validated and ...


    By LNI Swissgas

  • The Cost of Inaccurate CEM Calibration Gases

    Utility companies and other users of Continuous Emissions Monitoring (CEM) calibration gases often mistakenly consider them a commodity, making price the primary purchase consideration. Consequently, many are willing to settle for calibration gases that are ...

  • Measurement of Sulfur in Refinery Flare Gas Streams for Compliance with EPA SubpartJ(a) Regulations

    The Challenge Measurement of high range and low range H,S in refinery flare gas streams for compliance with EPA regulation NSPS Subpart J(a). The rule has placed an extra investment and operational burden on petroleum refineries to meet the regulatory requirement. AMETEK offers an economical solution to meet the challenge with an emphasis on lower capital and operating cost along with ...

  • The shifting sands of GHG regulation

    So far this year, there have been significant developments on U.S. climate change policy, including movement toward mandatory reporting and regulation of greenhouse gas (GHG) emissions at the federal level via either a cap-and-trade program or possibly existing Clean Air Act mechanisms. While the specifics are still uncertain regarding how these regulatory developments and legislative actions ...


    By Trinity Consultants

  • QuadOa and OGI: how EPA regulations are changing the way we look at gas leaks

    Earlier this year, the Environmental Protection Agency (EPA) published Regulation 40 CFR, Part 60, Sub-part OOOOa, commonly known as Quad Oa, and finally brought optical gas imaging (OGI) firmly into the mainstream. This presents a major shift in the way fugitive emissions are regulated, and the technology that can be used.  Detecting and acting on gas leaks is naturally a major ...

  • Gas Analyser Unit

    Gas Analysers are used in several industries, chemical industries in particualr use gas analysers to monitor their gas emission levels, air quality samples are compared to high purity reference gases to analyse and measure the emissions.  A common practice is to “calibrate” the sample air against clean, dry pure reference gases such as H2, He, Ar, or N2. The ...


    By Fike UK

  • EPA Regulations Raise the Bar for Industrial Air Quality Testing

    Far-reaching environmental legislation continues to change the way Americans live, work, and run their businesses. For the past ...

  • Gas Safety in Confined Spaces

    Introduction An offshore worker ensures a vessel is safe to enter; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face common dangers, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited. A confined space ...

  • Understanding the Benefits of Fixed Gas Detection

    "Fixed gas detection is an essential method of ensuring maximum protection for personnel and plant. There are a variety of technologies available for a multitude of applications. Understanding fixed gas detection is the first step in providing safety." What is fixed gas detection? Fixed gas detection is installed with the aim of providing continuous, area and personnel protection. ...


    By a1-cbiss

  • FTIR gas monitor for diverse applications

    QUANTITECH, a leading supplier of environmental monitoring instrumentation, has recently supplied EURO Environmental Services in Ireland with a transportable Gasmet FTIR multiparameter gas analyser which EURO Environmental's Managing Director Geoff Fitzpatrick says, “is proving invaluable in many varied applications across a broad selection of industries.” With headquarters in Drogheda in Ireland ...


    By Quantitech Ltd

  • Gas detector communication technology for offshore oil and gas platforms

    In few applications is safety as important as on offshore oil and gas platforms. Explosive hazards from hydrocarbon gases and vapours are an ever-present risk, whilst toxic hydrogen sulphide gas and depleted oxygen environments can pose significant risks to personnel. Gas detectors are therefore essential to provide dependable early warning of gas hazards. Gas detectors are permanently installed ...

  • Gas Dilution With The Equal Capillaries Technique

    The advantages of the equal capillaries technique are surprising and leads to reach accuracy values of one order of magnitude higher than all the other dynamic dilution techniques. This comparison will be supported by analyzing the accuracy available with two different techniques. Nozzles (sonic or non-sonic) technique With this technique, a series of different size nozzles is used ...


    By Be.T.A. Strumentazione Srl

  • Chlorine Dioxide gas detection: A comprehensive guide

    Introduction Some years agoago, the bleaching process in the paper industry was changed from using Chlorine (Cl2) as bleaching agent to Chlorine dioxide (ClO2). This was a challenge forThis posed a major challenge to industrial hygienists, as there were no sensors or detectors available that were specific to Chlorine dioxide: There was no sensor technology for gas detectors available that ...

  • FTIR becomes best option for multi-gas emissions

    Globally, the number of industrial processes and emissions being monitored with Gasmet’s FTIR multi-gas technology has increased enormously in recent years as process managers exploit the benefits of being able to monitor a wide range of gases simultaneously and with minimal maintenance and calibration requirements. Gasmet CEMS (continuous emissions monitoring systems) are used for ...


    By Gasmet Technologies Oy

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • A Guide to Gas Detector Tubes. Your Questions Answered

    Gas detector tubes are easy to use, are low cost, and the method is intrinsically safe, allowing it to be deployed in all industries. Because detector tubes don’t require calibration, users see the benefits of this technology over electronic gas detectors due to their ease of ...


    By a1-cbiss

  • So Your Greenhouse Gas (GHG) Monitoring Plan is Complete... Now What?!?

    U.S. EPA's Greenhouse Gas Mandatory Reporting Rule (GHG MRR) codified at 40 CFR Part 98 required that facilities subject to the rule have a complete written GHG Monitoring Plan by April 1, 2010. At a minimum, the GHG Monitoring Plan must identify (1) methods used to collect GHG emissions information and supporting data, (2) personnel responsible for collecting the data, and (3) quality assurance, ...


    By All4 Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you