car battery Articles

  • Base Car Battery Online at Lowest Prices in India

    BatteryBhai.com is India's No.1 online multi-brand battery store, offering 100% genuine batteries with manufacturer warranty. We have the complete range of automotive batteries and you can buy any car battery models from all well-known leading brands like Exide, Amaron, Luminous, Okaya, MtekPower, SF-Sonic Samui, DigiPower, Su-Kam, BASE, Tata Green and AcDelco. We look forward to creating a ...


    By BatteryBhai.com

  • The suitable battery for FlashRES resistivity meter

    Air freight battery pack is extremely diffculty in Australia, this makes installing internal battery to FlashRES resistivity meter counter-productive for ZZ. We thus use an external battery and connect it with our system. The correct external battery for our system should be a 12 volt truck/car battery of ≥ 90 Amp/hr is needed. Reference ...

  • Best Car Batteries in Hyderabad

    A car battery is nothing but  a physical reserve of energy within the car system.It  is usually charged by an alternator. An alternator is a device that converts the mechanical energy from the engine into electrical energy. Which is then used to prompt reactions within the electrolyte of the battery, which is most commonly composed of lead oxide plates submerged in a ...


    By BatteryDukaan

  • Exide Battery | Latest Prices, Models, Specifications Online

    Exide is one of the most preferred car and inverter batteries in India. These batteries are manufactured by Exide Technologies, a manufacturer with an undeniable presence in various parts of the world. Exide has been able to survive the competition that exists in this segment and continues to rule the roost because of its commitment to stay true to its quality and create batteries that last a ...


    By BatteryBhai.com

  • A Dead Battery is a Learning Experience

    Vehicles today are so reliable, younger drivers cannot imagine why any car needed a tune up every 2,000 miles like they did in the early ‘60’s. Previously my daughter had the battery die in her first car. Unable to start the car was the first hiccup in her limited driving experience. The front door flew open, followed by, “The car will not start! How will I get to work on time? ...


    By JADCO Manufacturing, Inc.

  • What Does the Future Hold for EPR?

    Extended producer responsibility (EPR) is a broad concept that requires manufacturers to accept responsibility for environmental effects during the life cycle of their products, and to assume responsibility for the disposal of the products they sell. EPR has many forms, the most prominent of which is “product take-back,” which requires companies to take back their products at the expiration of ...


    By Bergeson & Campbell, P.C.

  • Auto Parts Mould

    Auto Parts Mould Features Injection molding and pressure molding are the main methods. When designing the flow channel and parting surface, the cavity pressure should be as small as possible, the exhaust should be smooth, the discharge position, shape, and material flow direction should be fully considered, especially some small ribs. To do the ...

  • Wrexham Case Study

    On average, each household in the area of Wrexham County Borough Council produces more than one tonne of waste every year. However, great progress is being made in boosting recycling rates and reducing landfill– with households playing a major part in the reduction. Wrexham now has approximately 30,000 households using a kerbside recycling scheme, called ‘Recycle with Michael’, with more ...

  • Case study - Wastewater from car batteries disposal

    The Client Our Client is a secondary lead smelting plant, based in Europe, that produces mainly lead ingots for automotive car batteries, lead alloys and lead shot for hunting and sport shooting. The Challenge The Client has a recovery plant for lead acid batteries, capable of separating the different components of batteries by wet system, with ...


    By EVALED-Evaporator

  • BYD featured two series of electric forklift - forklift trucks

    Following the pure electric car E6 pure electric bus K9 frequent overseas orders, the global leader in electric vehicle BYD pure electric forklift carrying the world's first powered "iron battery" is a strong debut in the Feb. 19 opening of Stuttgart, Germany, international logistics and transport industry The exhibitions, which BYD pure electric forklift first ...

  • Auto Parts And Accessories

    Auto Parts DescriptionParts made from sheet molding compound (SMC) are typically 25-35% lighter than steel parts and aluminum products of the same strength. The stroke is increased and the fuel consumption is greatly reduced. Auto Parts And Accessories Featurs • Stable shape:SMC's thermal expansion coefficient, CLTE, is low enough to withstand engine ...

  • Lead and Polypropylene Materials from Car Batteries - Case Study

    Recycling areas: Various scrap Company name: MPI Recycling (MPI Reciklaža Metalurgija, plastika inženiring d.o.o.) Located: Črna na Koroškem, Slovenia Founded: 1990 Employees: 86 TAB is a Slovenian producer of lead acid flooded, VRLA AGM and VRLA Gel ...


    By Eldan Recycling A/S

  • The Newton, IA Landfill: A Smooth Operation

    The Newton, IA landfill sta rted out as an old strip mine in 1945. When it first was created, trash was dumped at the site and whenever it was needed, the garbage was set on fire and pushed into the old strip mine. As the rules have changed throughout the years, the dump was transitioned into a sanitary landfill in the late 1960s. However, at that time the trash would still pile up and would not ...


    By Waste Advantage Magazine

  • Taylor made washing lines for wet recycling of conterminated plastics

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, located in Sinsheim/Germany manufactures and sells complete washing lines for the recycling of plastics waste. Prior to re-pelletizing the plastic waste must be size reduced, washed and if necessary foreign materials separated. NEUE HERBOLD washing lines, produce granules or flakes with a high quality even at today's ...

  • Tailor-made washing lines for wet recycling of conterminated plastics

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, located in Sinsheim/Germany manufactures and sells complete washing lines for the recycling of plastics waste. Prior to re-pelletizing the plastic waste must be size reduced, washed and if necessary foreign materials separated. ...

  • Lean Green Transportation Machines: Adopting Strategies For The Future

    The challenge of implementing greener transportation systems—ones that don’t rely on fossil fuels—includes the adoption of new technology, modifying infrastructure and changing human behavior. That may sound difficult, but it is happening now. For example, bike sharing programs are being instituted in many cities. The goal is to reduce short car trips within the city ...


    By Greenshine New Energy LLC

  • Lean Green Transportation Machines—Adopting Strategies for the Future

    The challenge of implementing greener transportation systems—ones that don’t rely on fossil fuels—includes the adoption of new technology, modifying infrastructure and changing human behavior. That may sound difficult, but it is happening now. For example, bike sharing programs are being instituted in many cities. The goal is to reduce short car trips within the city that lead ...


    By Greenshine New Energy LLC

  • How can lead be so crucial, but also so toxic?

    Why is everyone talking about lead? Not long ago, like so many historic buildings in the UK, a local parish church near to where I live had the lead stolen from its roof.  Sadly, this is not so unusual and all the more distressing in this case, both because it holds special memories as the church where my wife and I were married, and also because the lead was stolen during heavy ...

  • What is Incineration?

    What is incineration? “Everything you ever wanted to know, but never dared to ask!” In its most basic form, it is the destruction of something, especially waste material, by burning. Incineration is a thermo-decomposition process where the components present in the waste stream are ionized into harmless elements at a higher temperature in the presence of oxygen. ...


    By Inciner8 Limited

  • London speed up the electric car capital race with new charging points

    Mayor of London has launched a new Source London Scheme that adds 150 charging points, and integrates different membership schemes. London has made a significant effort to become the “electric car capital of Europe” with the launch of the Source London Scheme that adds 150 charging points in the city. The creation of the first capital-wide charging network is an attempt to ...


    By Vital Energi

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you