car shredder Articles

  • Recycling of Cars Made Green and Cleaner with Verderflex Peristaltic Pumps

    At the end of its’ life, a car yields on average, 140 kilos of shredder waste: 26 kg of metals, 69 kg of plastics, 11 kg of minerals and 24 kg of fibres. In Tiel, Netherlands, a Post Shredder Treatment plant (PST) was built in 2011, for the recycling of cars. The PST plant is one of the two plants in Europe that are able to recycle to approximately 95% of the waste materials. ...

  • Presses and shredders from one source - Case Study

    Channel baling press, document shredders and hard disc shredder: Schmitt Recycling in Fulda is based entirely on HSM. The proprietor, Wolfgang Schmitt, values the high performance and reliability of the HSM machines. The modern machine park helps him against major competitors. It is a bit like Asterix: Schmitt Recycling in Fulda is a smaller medium-sized waste disposal business with ...


    By HSM GmbH + Co. KG

  • Automobile Shredder Residue (ASR) destruction in a plasma gasification reactor

    Test results on Automobile Shredder Residue (ASR), or car fluff, demonstrated destruction efficiency and safe conversion to synthesis gas and a glass residue, in a plasma gasification system. The synthesis gas consists primarily of hydrogen and carbon monoxide in the range between 20 and 22 vol-% respectively, or 45 and 55 vol-% dry basis, when corrected for nitrogen. In dry reforming operation, ...


    By Inderscience Publishers

  • Sorting Equipment Focus: Keeping Time

    (From Recycling Today Magazine) In with the new, out with the old. A reversal of an old adage is perhaps the best way to describe the increased demand for America’s scrap metals. The world’s hunger for new cars, appliances and buildings was a boon for steel makers in 2004.  Global steel production exceeded 1 billion tons last year, a record amount. And as the need for “new” steel products ...

  • Oil palm fiber

    Oil palm fiber is produced from empty fruit bunch that are considered as waste after the extraction oil palm fruits. During the manufacturing process of palm fiber , EFB( empty fruit bunches) are shredded, separated, refined and dried. The manufacturing process does not involved chemical process or exposure. Hence the palm fibre is clean ...


    By Harden Industries Ltd.

  • Identity Theft, new law about to send shredding on a tear

    Do you shred? If not, get ready to. You've heard about shredding. You understand that it's probably a good idea to shred any receipts that have your credit card numbers or other personal information on them to stop identity theft. You may have seen shredders at the office or noticed bulging trash bags of thin paper strips in the dumpster when you're walking the dog past a local ...


    By Shred-Tech Corp.

  • Document shredding as an economic mainstay for workshops for the disabled - Case Study

    Secure document shredding Document shredding is an important economic mainstay for the workshops for disabled persons at Lammetal Werkstätten GmbH. Now the company can continue to expand this service area with a “social commitment” thanks to two high performance shredders from HSM in Frickingen at Lake Constance / Germany. The Lammetal workshops could be ...


    By HSM GmbH + Co. KG

  • `A real blockbuster`

    Recycling experts among themselves. Whenever UNTHA distributes invites to a live demonstration of one of its product innovations, industry experts are eager to accept. Most recently, attendees were bravely encouraged to: "Test the best!" The location: .A.S.A. Abfall Service AG in Himberg/Lower Austria; the focal point: The revolutionary new UNTHA Shredder ...


    By UNTHA Shredding Technology

  • EU’s End-of-life Vehicle Rules Stuck in Neutral

    Against a backdrop of stagnant car sales and falling scrap metal prices, car makers and recyclers are gearing up for the implementation of the European Union’s end-of-life vehicle directive. Or are they? The European Union’s controversial end-of-life vehicle (ELV) directive comes into effect this month. But its passage from paper to practice appears to have stalled at a national level as car ...


  • Shredding of end-of-life tyres (ELTs): a ´black gold mine´ ready for being exploited

    “Problems can't be solved by using the same kind of thinking we used when we created them" (Albert Einstein). The 2014 report by the ETRMA (European Tyre and Rubber Manufactures’ Association Sustainable Development Foundation) shows that only considering consumer, light truck, truck, motorcycle and agriculture tyres, in 2012 Germany, UK, France, Italy and Spain had been able ...


    By SatrindTech Srl

  • The Life Cycle of Rubber

    In this day and age, our society revolves around movement. Cars, planes, buses, motorcycles, trucks, and thousands of other vehicles help to transport us all over the globe. Most of these modes of transportation rely on tires and other rubber products for one main intended purpose; movement. Millions of tires are produced every year to fulfill our transportation needs. Sadly, the production of ...


    By ECO Green Equipment

  • RWM 2010 Preview: Riverside Provides the Complete Solution

    Riverside Waste Machinery, the specialist shredding and baling equipment supplier, will once again have a major presence at September’s RWM exhibition (14-16th). Joining forces with pioneering Austrian shredding machinery manufacturer UNTHA on one of the largest stands of the show, the team will demonstrate its leading expertise in waste management. ...


    By UNTHA UK LTD

  • Impact supports the plastic recycling industry to improve product quality

    Impact Air Systems were recently contacted by a well established metal recycling company who had installed a plastic recycling facility at their 32 acre site in Lincolnshire. Blue Sky Plastics Ltd installed a plastic recycling system to recycle household rigid plastic material and plastic car components and needed to further improve the quality of the HDPE and PP granules by removing the ...


    By Impact Air Systems

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that were once abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain subs tances ...


    By Oil Skimmers, Inc.

  • Taylor made washing lines for wet recycling of conterminated plastics

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, located in Sinsheim/Germany manufactures and sells complete washing lines for the recycling of plastics waste. Prior to re-pelletizing the plastic waste must be size reduced, washed and if necessary foreign materials separated. NEUE HERBOLD washing lines, produce granules or flakes with a high quality even at today's ...

  • Solidification / Immobilisation of hazardous waste for subterranean storage

    The use of subterranean salt mines for the final storage of inorganic hazardous waste is state of the art in Germany, and in fact most other European countries. However, the technical requirements to prepare the waste in an appropriate way are quite challenging. Over ten years ago econ supplied a plant to a salt mine in eastern Germany. The plant uses econ’s unique batch-wise working mixing ...


    By econ industries GmbH

  • E-cycling in Europe - Buried under a mountain

    The EU Directive on Waste from Electrical and Electronic Equipment (WEEE) and the RoHS directive relating to the banning of harmful substances are currently being transposed into national law by the EU’s 25 member states. This process has created a bureaucratic nightmare which is not only damaging the recycling sector but also burying the electronics industry under a mountain of costs. The high ...


    By Recycling International

  • Tailor-made washing lines for wet recycling of conterminated plastics

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, located in Sinsheim/Germany manufactures and sells complete washing lines for the recycling of plastics waste. Prior to re-pelletizing the plastic waste must be size reduced, washed and if necessary foreign materials separated. ...

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that once were abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain substances ...


    By Oil Skimmers, Inc.

  • Why waste management

    Since 1973 we are a part of environmentally friendly and economical shredding systems for all types of waste. Since 1973 MERCODOR GmbH Sondermaschinenbau KG (Special Products), Frankfurt/Main, The company’s shredding systems are used for the reduction of waste volume in various commercial and industrial applications, including hotels, hospitals, commercial kitchens and cruise ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you