cardboard Articles

  • Paper and Cardboard - Recovery or Disposal?

    To provide a solid basis for policies and policymakingin the field of waste management, the environmental and economic impacts causedby different waste treatment options should be examined. In recent years, a large number of studies comparing recycling with recovery or final disposal have been published, which are based on life cycle assessment (LCA) and cost-benefit analysis (CBA). To the ...

  • Mineral oil contaminations in cardboard

    SpeedExtractor E-916: Optimization of pressurized solvent extraction (PSE) for the rapid and efficient determination of MOSH and MOAH in cardboard Many food samples are often contaminated with mineral oil coming from different sources. One possible source of contamination is the migration from cardboard packaging made of recycled fibres. ...


    By BÜCHI Labortechnik AG

  • Ten Questions to Answer Before Buying a Baler

    How Do You Know When You Need a Baler? Business owners and facilities managers can easily tell when it is time to purchase a baler.  Commodities like cardboard, aluminum, paper, textiles, plastics, and non-ferrous metals can accumulate and create unsafe work environments.  It is expensive to pay waste haulers to take these items away with the rest of the trash.  It is also ...


    By Harmony Enterprises, Inc.

  • Simple Separation: Diverting Wood And Cardboard at Construction Sites

    Diverting Wood And Cardboard At Construction Sites Residential home construction in Wisconsin generates 128,000 tons of residuals annually, according to a 1998 study by Camp, Dresser & McKee. Ten builders are participating in a project to demonstrate how easily major components of this waste stream can be recycled. The Metropolitan Builders Association (MBA) of Greater Milwaukee, the ...


    By BioCycle Magazine

  • Should You Rent, Lease or Purchase Cardboard Balers?

    Waste disposal is more complex than just throwing away unwanted material. How you dispose of it, whether you recycle it and where it will ultimately land up are important concerns. Organizations all over the world are implementing environmental friendly methods to dispose of their waste. One popular technique is to compact the materials waiting to be recycled. Materials such as cardboard are made ...

  • Easy baling of extra large cardboard - Case Study

    Whenever genuine spare parts are needed for the vehicles made by large automobile manufacturers, the Rudolph Logistik Group in Baunatal, near Kassel/Germany, ensures they are available. Their spare parts logistics is an ingenious operation! This is now also true of the way they deal with the huge amount of waste cardboard generated. The contract logistics specialists found an optimal disposal ...


    By HSM GmbH + Co. KG

  • ReStore – Recycling building materials and cardboard too! - Case Study

    Each year, ReStore in New Brighton, Minnesota keeps at least 690 tons of Twin Cities building materials from entering the landfill! With amazing recycling results under their belt, Restore is always aiming at doing more to help the Earth. They are building a new ReStore in South Minneapolis, scheduled to ...


    By Harmony Enterprises, Inc.

  • Cardboard baler helps Echo Food Shelf reduce hunger - Case Study

    One epidemic that has taken our nation by storm is hunger.  According to a Feeding America Study, 1 in 7 Americans relies on a food pantry for food assistance every month.  A staggering 1 in 4 military families need help providing their loved ones with enough food to eat.  More and more children under the age of 18 rely on school meals as their main source of daily nutrition.  ...


    By Harmony Enterprises, Inc.

  • Local food bank saves space with cardboard baler - Case Study

    When a local food bank expands their building and invests in a cardboard baler, you know they are distributing a lot of food and helping a lot of people. Channel One Regional Food Bank in Rochester, Minnesota (less than an hour from us in Harmony, MN) is doing just that. They began their operations in 1980, but recently completed a major building expansion. They serve ...


    By Harmony Enterprises, Inc.

  • A “Wise” Solution: Baler Turns Cardboard Into Cash - Case Study

    In the past several decades, Cash Wise Foods stores have made a big splash in Minnesota and North Dakota.  A subsidiary of Coborn’s, Cash Wise stores are big box food stores focused on low price, variety, and value.  According to their own marketing promotions, “’Efficiency’ is the name of the game so ...


    By Harmony Enterprises, Inc.

  • How to Select Permit Conditions That Ensure Maximum Operational Flexibility: A Case Study at a Cardboard Manufacturing Site

    The identification and acquisition of flexible permit conditions has been essential to the successful operation and compliance status of a cardboard manufacturing site in Los Angeles. In 1999, the owner was cited for exceeding the volatile organic compound (VOC) emission limits on two stationary sources by the California Air Quality Management District (CAQMD). A notice of violation (NOV) was ...


    By Coto Consulting, Inc.

  • Recycling of cardboard, PET and aluminium drinks cans in new channel baling presses - Case Study

    Europe's largest logistics provider, Euro Pool System, in Hungary with new recycling hall In neatly lined-up wire cage carts, cardboard, PET bottles and cans from 175 branches of a supermarket chain in Hungary wait to be compressed into bales. The used packaging is carried via chain conveyors into two parallel channel baling presses and it's there they are tightly compacted. Two shifts a ...


    By HSM GmbH + Co. KG

  • Cash wise foods - Case Study

    Cash Wise Foods, a subsidiary of Coborn’s, are big box food stores focused on low price, variety, and value and have made a big splash in Minnesota and North Dakota. Recycling Equipment – M60CB Vertical Cardboard Baler Challenge: Cash Wise Foods thrives on ...


    By Harmony Enterprises, Inc.

  • Sorting plant for paper

    Task New conception of a complete sorting plant for used paper from a collection with an averaged proportion of cardboard about 35 % to max.  45 %. Separation of the paper-cardboard mix  into the fractions paperboard, deinking and  mixed paper for the further recycling Solution The material input is divided on two lines by  a feeding conveyor ...


  • Herko saves time and money with a B5 W baler - Case Study

    The automotive company, Herko, located in Miami, Florida, saved up time and space after installing a B5 W baler for cardboard. Herko, a distributor of automotive parts for OEM and Aftermarket now treats their waste as an integrated part of the workflow. The placement of a Bramidan B5 W baler close to their waste source instantly optimized their waste handling solution both from a logistic and ...


    By Bramidan Balers

  • Case study - Altpapier Sortierung Dachau Gmbh – Germany - Sensor based optical sorting for paper de-inking

    Customer ASD - Altpapier Sortierung Dachau GmbH - are specialists in recycling of waste paper. The company produces high quality paper grades for their industry partners. Requirements The requirements are maximised gain output with the highest purities of 97% of sorted paper grades from waste paper with less than 8% de-inking loss overall. ...

  • A three month test run was a success at OBI - Case Study

    People used to get tools and nails from the ironmonger, they bought paint and wallpaper from the specialist paint shop and wood from the timber merchant. Now the customers can obtain everything from the OBI store. Loads of loose waste The variety of goods on the shelves in an OBI store means loads of waste in the goods reception, which take up a lot of space. The OBI ...


    By Bramidan Balers

  • Repacking goods must be made in a quick and efficient way - Case Study

    At Prime Cargo in Kolding time is an influencing factor, due to tight deadlines from customers around the world, who need goods to be transported, stored and forwarded on time. Prime Cargo is an international forwarding company with headquarters in Kolding, Denmark. With offices and agents all over the world this company is total supplier of transport solutions at sea, on the road and in the air ...


    By Bramidan Balers

  • Sorting plant for light packaging material, location: Madeira

    Task New conception of an automatical light  packagings sorting plant for production of marketable potential recyclables, as there  are: PET, PE, bricks, FE, Aluminium, paper  and cardboard. Solution The bags with the light packagins are opened  in a bag opener. Afterwards all troubling substances are taken out. A downstream  ballistic ...


  • Energy efficient waste disposal solution - Case Study

    Piled higher It’s 6.20 metres high, weighs 40 tonnes and has a pressing power of 1,200 kilonewton (kN): the fully automated VK 12018 R channel baling press from HSM in Frickingen for pressing paper, cardboard and cardboard boxes has been in use by the disposal company SITA in Hochheim for around three months. There are fewer bales thanks to the enormous pressing pressure and the large ...


    By HSM GmbH + Co. KG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you