cem stack analyzer Articles

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • The Flexibility & Versatility of a Portable Emissions Analyzer

    Issue Fixed CEMS (Continuous Emissions Monitors) Measure at One Location CEMS are fixed units that typically only measure from one sample location which is usually on a main centralized stack. This main stack is often fed by several separate emissions sources throughout the plant such as boilers, heaters, engines, ovens, and furnaces. If the CEM ...

  • The Flexibility & Versatility of a Portable Emissions Analyzer - Case study

    Issue Fixed CEMS (Continuous Emissions Monitors) Measure at One Location CEMS are fixed units that typically only measure from one sample location which is usually on a main centralized stack. This main stack is often fed by several separate emissions sources throughout the plant such as boilers, heaters, engines, ovens, and furnaces. If the CEM ...

  • Testing the Performance of a DeNOx System Using a Portable Emissions Analyzer - Case study

    Using Portable Emissions Analyzers to Measure the Performance of a NOxReduction System in a Power Plant Boiler The majority of power plants utilize NOx reduction systems (eg. Ammonia Injection, SCR, etc.) in their power boilers to ensure that the NOx emissions levels comply with current regulations. The frequent evaluation of the ...

  • Navigating NSPS subpart Db for boilers: a case study

    Over the past year, Trinity assisted a chemical company with the permitting and installation of a new 220 MMBtu/hr package boiler. The new natural gas-fired boiler replaces coal-fired units that were installed in the 1940s. Navigating through the numerous, and at times conflicting, regulatory requirements applicable to such a unit has been challenging. With careful planning and implementation, ...


    By Trinity Consultants

  • Mobile Stationary Source Emissions Testing, Coming to a Facility Near You?

    Last week, Antea Group had the unique opportunity to perform a RATA (relative accuracy test audit) of the emissions from a thermal oxidizer at an ethanol production facility located in Minnesota using a state-of-the-art mobile testing laboratory. During this RATA audit, actual stack emissions levels (including NOx, SOx, CO2, CO, O2, flow rate, temperature, velocity and pressure) from the ...


    By Antea Group - USA

  • Process & Emissions Optimization - Case study

    There are many locations that should be measured and monitored with a portable emissions analyzer to maximize product quality, combustion efficiency, safety, and emissions reduction in a cement plant including the following: Rotary Kiln gas outlet O2, CO, NOx, CO2, SO2, CxHy, temperature ...

  • Facilitating compliance with consent decree requirements using an EMIS

    In late 2008, T3, a division of Trinity Consultants, developed an environmental management information system (EMIS) to manage “near real-time” emissions data at a petroleum refinery. The system is designed to support Consent Decree requirements for compliance demonstrations with air quality regulations at the facility. Functionality delivered includes advanced data gathering, ...


    By Trinity Consultants

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...

  • Method 301 Evaluation of Candidate conditional methods case study

    A new metal emissions measurement and validation system has recently been developed that has the potential to significantly improve our understanding of metal emissions from a wide range of source categories. This system consists of: A continuous emission monitoring system (Xact-CEMS) An instrumental analyzer procedure (Xact-IAP) A sampling and analysis measurement method ...

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • How conditions affect cookies and air pollution control solutions

    Chocolate chip cookies are one of my favorite treats. Butter, sugar, eggs, flour, vanilla, and, of course, chocolate chips. Combine the ingredients together and you get a delicious cookie. Somehow, using the same ingredients the cookies do not always turn out the same. Sometimes they are thinner and crispier. Other times, they are soft and chewy. After watching cooking shows, I have come to ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you