cement dust control Articles

  • Possible reuse of Egyptian controlled cement dust

    Possibilities for the reuse of controlled cement dust, collected from the hopper of the electrostatic precipitators installed on the different cement kilns of two of the three biggest companies for Portland cement production located to the south of Cairo, have been investigated. Twenty-one factors representing the physical properties and mineral and chemical composition of the cement dust were ...


    By Inderscience Publishers

  • Cement kiln dust landfill

    Client: Confidential Location: Southam, Rugby Services: Hydrogeological risk assessment , data interpretation. Issues: Poor background groundwater quality, dewatering, potential risk to controlled waters Summary: ESI provided the data analysis, interpretation and hydrogeological risk assessment ...


    By ESI Consulting Ltd

  • Air pollution control through kiln recycling by-pass dust in a cement factory

    Over the centuries, air pollution has increased from a local nuisance to a global problem (Emberlin 1998). Cement industry is one of the most important and strategic industries in Iran. However, its air pollution has been a serious problem. The primary related pollution is dust, which industrial countries have allocated tremendous efforts in reducing its volume. Dust in different stages of a ...


    By University of Tehran

  • CaO–LOI classification system for cement kiln dust

    Cement Kiln Dust (CKD), a residual of cement production, has been used effectively as a cement replacement, but there is a lack of guidance for its appropriate selection and performance in specific engineering applications. Since CKD is not a controlled product, the chemical composition and material properties differ from source to source like coal fly ash. This paper presents a dual–letter ...


    By Inderscience Publishers

  • Cement Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Continuous Mercury Monitoring Benefits Cement Plants

    Antti Heikkilä from Gasmet Technologies highlights the challenges faced by mercury monitoring in cement kilns, and explains how a new continuous mercury monitoring system addresses these issues and provides process operators with an opportunity to improve environmental performance and demonstrate compliance with forthcoming legislation. Background The production of cement ...


    By Gasmet Technologies Oy

  • Holcim Ste. Genevieve Cement Plant - Case Study

    Big and beautiful The new cement manufacturing facility of Holcim (US) at Ste. Genevieve with a production capacity of four million tonnes per year went on stream mid-2009 and is one of the most environmentally-efficient cement plants in the Holcim Group. It is 40 percent more energy-efficient than the Holcim (US) plants that were closed in 2009 and emits 10 to 25 percent less ...

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • New laser-based dust emission monitoring system

    Abstract A new generation of continuous particulate matter concentration monitoring instruments is presented, covering a measuring range of 0 to 1000 mg/m3. The laser-based scattered light instrument gives an improved stability as well as excellent resolution in the low range. This enables high concentration measurement as well as especially low emission monitoring down to 0.01 mg/m3 with a ...


    By SIGRIST - PHOTOMETER AG

  • INTRINSICALLY SAFE WIRELESS MONITORING AND CONTROL NODES ARE CERTIFIED WORLDWIDE FOR USE IN HAZARDOUS AREAS

    INTRINSICALLY SAFE WIRELESS MONITORING AND CONTROL NODES ARE CERTIFIED WORLDWIDE FOR USE IN HAZARDOUS AREAS DX99 FlexPower nodes from Banner Engineering are available in metal housing for gas and dust atmospheres A series of intrinsically safe wireless communication nodes certified for worldwide use in explosive gas or dust atmospheres is available from Banner Engineering. The nodes interface ...


    By Banner Engineering Corp.

  • Boggabri Erosion Control Flumes, New South Wales - Case Study

    Background During the past ten to fifteen years, the resources sector has seen phenomenal growth however in the areas of coal, gas and petroleum the expansion has been unprecedented. In NSW, coal mining in the Hunter Valley near Singleton and Muswellbrook has always been the focus of attention for coal mining and growth, however despite expectations that deposits will be available for some ...


    By Presto Geosystems

  • Cemex plant Ruedersdorf - Case Study

    CEMEX Deutschland AG is one of the biggest producers of ready-mixed-concrete, cement and minerals. In Germany CEMEX employs a staff of approximately 3,200 people and is part of the International CEMEX Group with a head count of 50,000. After the German re-unification the Company acquired the existing cement plant in Ruedersdorf. Investments to save CEMEX invested ...

  • Abrasives case study - Essroc Materials, Inc.

    Plugging, Surging and Wear-Through Virtually Eliminated by Smart Elbows® At Essroc Materials, Inc., formerly Coplay Cement, plugging and elbow wear in pneumatic conveying lines caused unnecessary downtime and repair expense. The Frederick, MD, facility is a wet-process cement plant that produces 350,000 to 400,000 tons of cement a year using two 400-foot-long rotary ...


    By HammerTek Corporation

  • Process & Emissions Optimization - Case study

    There are many locations that should be measured and monitored with a portable emissions analyzer to maximize product quality, combustion efficiency, safety, and emissions reduction in a cement plant including the following: Rotary Kiln gas outlet O2, CO, NOx, CO2, SO2, CxHy, temperature ...

  • Insitu mixing of dry and slurried reagents in soil and sludge using shallow soil mixing

    Introduction Recent implementation for the Federal Hazardous Waste Land Disposal Restrictions (LDR) to RCRA and USEPA's willingness to approve on-site treatment and/or containment has allowed in situ treatment methods to become viable options in site remediation. Shallow Soil Mixing (SSM) is one of several in situ mixing techniques now commercially available for use in on-site treatment of ...


    By Geo-Con, Inc.

  • Four-year review of a hydrogeological risk assessment for an active landfill

    Client: Waste Management Industry Location: Cambridgeshire, UK Services: Hydrogeological Risk Assessment, compilation and assessment of monitoring data Issues: Potential risk to groundwater, trigger level compliance Summary: ESI undertook the 4-yearly Hydrogeological Risk Assessment review for the ...


    By ESI Consulting Ltd

  • Fuel preparation technology – the latest safety considerations

    The specifications for new fuel preparation technologies are becoming increasingly sophisticated, as industry innovation continues apace. But when it comes to investing in waste shredders that help manufacture cement fuels, which criteria should top the procurement wish-list in 2018? With more than 25 years’ experience in this sector, Peter Streinik, head of UNTHA’s waste shredding ...

  • Electrofilter protection by fast monitoring of CO in flue gas – Case Study

    Electrostatic precipitators Many industrial operations produce exhaust gases that contain dust, fly ash (unburned constituents), fumes (including fine elemental particles such as cadmium, sulfur and lead) and mist (such as coal tar), which cause an unwanted impact to human health and the environment. One widely used method of removing such contaminants from a gas stream is to use an ...

  • New developments of vibratory feeders for large bulk material reclaim systems

    Summary The efficient economical storage, movement, control and blending of large tonnages at coal handling installations such as mines, power plants and port facilities require new and improved designs of vibratory equipment. Environmental and investment impact as well as operational advantages must be considered in the development of any new reclaim system. ...


    By General Kinematics

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you