cement electrostatic precipitator Articles

  • Cement and Lime Kilns case study

    Cement and Lime Kilns PROCESS DESCRIPTION Cement, lime and gypsum manufacturing processes have in common the mixing of inorganic minerals calcined at high temperatures typically using rotary kilns (vertical kilns are also used). CEMENT Regular Portland cements are the usual products for general concrete construction. The raw ...

  • Possible reuse of Egyptian controlled cement dust

    Possibilities for the reuse of controlled cement dust, collected from the hopper of the electrostatic precipitators installed on the different cement kilns of two of the three biggest companies for Portland cement production located to the south of Cairo, have been investigated. Twenty-one factors representing the physical properties and mineral and chemical composition of the cement dust were ...


    By Inderscience Publishers

  • Equilibrium analysis for heavy metal cation removal using cement kiln dust

    Ion exchange, reverse osmosis, and chemical precipitation have been investigated extensively for heavy metal uptake. However, they are deemed too expensive to meet stringent effluent characteristics. In this study, cement kiln dust (CKD) was examined for the removal of target heavy metals. Adsorption studies in completely mixed batch reactors were used to generate equilibrium pH adsorption ...


    By IWA Publishing

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • Controlling Stack Emissions in the Wood Products Industry & Wood Fired Boilers

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...

  • Electrofilter protection by fast monitoring of CO in flue gas – Case Study

    Electrostatic precipitators Many industrial operations produce exhaust gases that contain dust, fly ash (unburned constituents), fumes (including fine elemental particles such as cadmium, sulfur and lead) and mist (such as coal tar), which cause an unwanted impact to human health and the environment. One widely used method of removing such contaminants from a gas stream is to use an ...

  • High-Tech Filters

    The current economic situation of the cement industry creates sensitivity regarding off-times and process stability. More stringent air-pollution laws, especially when using waste-derived fuels, are drawing more attention to the off-gas cleaning facilities, usually bag filters. This article does not deal with electrostatic precipitators - as even they have well known disadvantages. By using more ...


    By Evonik Fibres GmbH

  • Process & Emissions Optimization - Case study

    There are many locations that should be measured and monitored with a portable emissions analyzer to maximize product quality, combustion efficiency, safety, and emissions reduction in a cement plant including the following: Rotary Kiln gas outlet O2, CO, NOx, CO2, SO2, CxHy, temperature ...

  • Ten top growth markets in air, water and energy

    For suppliers of products and services for the air, water, and energy industries there are some substantial double-digit growth opportunities. Ten of these have been identified as the most promising by the McIlvaine Company These are ranked based on potential market size. #1 Shale Gas There is a very large continuing investment in extraction of gas from shale in the U.S. The ...


    By The McIlvaine Company

  • EPA proposes updates to CISWI rules

    On June 4, 2010, the U.S. EPA proposed updates to the Standards of Performance for New Stationary Sources (NSPS) for Commercial and Industrial Solid Waste Incineration (CISWI) Units (NSPS Subpart CCCC) and Emission Guidelines (EG) for Existing CISWI Units (EG Subpart DDDD), collectively referred to as the "CISWI Rules." In order to describe the proposed updates to the CISWI Rules, it is necessary ...


    By Trinity Consultants

  • Final CISWI rule

    On March 21, 2011, in parallel with publication of the Boiler National Emission Standard for Hazardous Air Pollutants (NESHAP) rules and the Non-Hazardous Secondary Material (NHSM) rule, EPA promulgated the final updates to the New Source Performance Standards (NSPS) and Emission Guidelines (EG) for Existing CISWI Units, collectively referred to as the “2011 CISWI Rules.”1 The 2011 ...


    By Trinity Consultants

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you