cement kiln operator Articles

  • Cement kiln dust landfill

    Client: Confidential Location: Southam, Rugby Services: Hydrogeological risk assessment , data interpretation. Issues: Poor background groundwater quality, dewatering, potential risk to controlled waters Summary: ESI provided the data analysis, interpretation and hydrogeological risk assessment ...


    By ESI Consulting Ltd

  • Variability of NOx Emissions from Precalciner Cement Kiln Systems

    In 2003, there are forty-two precalciner kilns out of about 190 total portland cement kiln systems operating in the United States. As a class, precalciner kiln systems have the lowest annual mass emissions of the oxides of nitrogen (NOx) per ton of clinker when compared to wet, long-dry and preheater kiln systems, however, like all cement kilns, precalciner systems experience significant ...


    By Trinity Consultants

  • Suspension Burning for Tire Fuel Optimization in Precalciner Cement Kilns

    Synopsis: A presentation on optimizing substitution rates of Tire Derived Fuel (TDF) in precalciner kilns using Suspension Burner technology.  Discussions will be made on the challenges faced by both preheater and precalciner kilns using TDF on the feed shelf, technical measures aimed at solving these limitations, achieving high TDF ...


    By AFS Technology

  • Air Rule for Cement Kilns Requires 92 Percent Cut in Mercury Emissions

    Portland cement kilns will be required to reduce emissions of mercury by 92 percent as part of an Environmental Protection Agency final rule announced Aug. 9 that imposes controls for several toxic pollutants. Although most of the emissions standards in the final rule are less stringent than what the agency had proposed in 2009, the cement industry said the cost to operate the required controls ...


    By Ohio Lumex

  • End-of-life Tires as an Alternative Fuel (TDF) in Cement Kilns: Now Easier than Ever!

    End-of-life tires are a challenging type of waste since they are difficult to shred and are expensive to treat and get rid of. However, tire derived fuel TDF is an extremely good alternative to the traditional fuels used in cement kilns, like oil, coal, and petroleum coke. The following blog presents a solution and explains how TDF can be used for heating cement kilns. ...


    By Tana Oy

  • Cementing the PC MACT

    On September 9, 2010, the U.S. EPA promulgated the final amendments to the National Emissions Standard for Hazardous Air Pollutants from Portland Cement Manufacturing Industry (40 CFR 63 Subpart LLL), also known as the PC MACT. EPA’s self-proclaimed “historic” rulemaking includes some important implications for cement manufacturers and other sources that may be subject to ...


    By Trinity Consultants

  • `Variability of NOx Emissions from Precalciner Cement Kiln Systems,` presented at the 2004 AWMA annual conference

    Abstract In 2003, there were forty-two precalciner kilns out of about 190 total Portland cement kiln systems operating in the United States. As a class, precalciner kiln systems have the lowest annual mass emissions of the oxides of nitrogen (NOx) per ton of clinker when compared to wet, long-dry and preheater kiln systems; however, like all cement kilns, precalciner systems experience ...


    By Trinity Consultants

  • What Should be Noted when Using a Rotary Kiln?

    Rotary kiln for sale is the core of the whole cement production line and the technical management plays a vital role in the stable and continuous operation of rotary kiln. Here Kefan Machinery gives a summary to the possible failure and solutions in ...

  • Continuous Mercury Monitoring Benefits Cement Plants

    Antti Heikkilä from Gasmet Technologies highlights the challenges faced by mercury monitoring in cement kilns, and explains how a new continuous mercury monitoring system addresses these issues and provides process operators with an opportunity to improve environmental performance and demonstrate compliance with forthcoming legislation. Background The production of cement ...


    By Gasmet Technologies Oy

  • XRF cement analysis | Spectroscopy Solutions

    Cement is a primary building material in the modern world; as a major constituent of buildings, concrete structures and roads the consistency of its composition during production is essential. ...


    By Specac Limited

  • Cement Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Impact assessment of CO2 emissions caused by exergy losses in the cement sector

    In this study, global effects caused by exergetic inefficiency are examined for rotary kiln of the cement plant. For this purpose, a rotary kiln process of a cement plant in Turkey is modelled, and the annual operation data of this process is analysed. As a first step, an exergy analysis is carried out for all of the thermal processes of the cement plant. Then exergy losses and carbon dioxide ...


    By Inderscience Publishers

  • What Do You Know about Dry and Wet Types Rotary Kiln?

    The dry and wet types dry and wet types rotary kiln is not only important equipment in cement making production line, but also the heart of cement enterprise. We must use and maintenance for dry and wet types rotary kiln, and ensure the normal and the long-term safety operation. In view of equipment management, the straightness of dry and wet types rotary kiln centerline and the inclined Angleall ...


    By Fote Machinery

  • Practical Buying Guide When You Need Rotary Kiln From kefan

    Rotary kiln for sale is to point to rotating calcining kiln, is a kind of mining machinery widely used in building material, metallurgy, chemical, environmental protection and many other production industry. Often do mechanically, physical or chemical processing of solid materials. At present, there are many rotary kiln ...

  • `A Case Study in Implementation of the NESHAPs for the Portland Cement Industry at a Major Source,` appeared in Cement Americas magazine, July/August 2003

    Introduction Located at 40 CFR 63, Subpart LLL, the Portland Cement (PC) MACT standard poses a significant regulatory hurdle to the cement industry-Facilities subject to its requirements had to complete initial performance testing and develop their first substantial semi-annual monitoring report by January 31, 2003. The final Portland Cement MACT rule was promulgated on June 14, 1999, ...


    By Trinity Consultants

  • Use of process analyzers in cement plants solutions from Siemens – Case Study

    Cement is a hydraulic binding agent to produce concrete. Due in part to the fast growth of the Asian economies, world consumption of cement is currently growing at an annual rate of 8%. Therefore, cement production is expanding and, at the same time, production processes need to be optimized to ensure maximum efficiency. In this context, process analytics plays an important role: It determines ...

  • Xenemetrix EX-3600M (EDXRF) spectrometer analysis of the major elements in cement and compliance with ASTM Method C-114

    Energy Dispersive X-ray Fluorescence (EDXRF) can play a vital role in this industry by giving accurate analytical results in a short time.  ASTM C-114 is the test method used for the analysis of hydraulic cements. .  The overview of Xenemetrix EX-3600M (EDXRF) spectrometer analysis of the major elements in cement and compliance with ASTM Method C-114 will be described in this ...


    By Xenemetrix Ltd.

  • A Case Study in Implementation of the National Emission Standard for Hazardous Air Pollutants for the Portland Cement Industry at a Major Source

    The regulations at 40 CFR 63, Subpart LLL are commonly known as PC MACT because the rule establishes the maximum available control technology for hazardous air pollutants (HAPs) from portland cement plants in the United States. There are 188 HAPs specified in Section 112 of the Clean Air Act Amendments of 1990. Two classifications of HAP emitters are specified in 40 CFR 63. Major sources of HAPs ...


    By Trinity Consultants

  • Speed reducer gearbox design application that we can supply and manufactures

    1.IntroductionCement production line is a complex production line specializing in the production of cement production line. This production line mainly consists of the processes of crushing and preparation homogenization, raw material preparation homogenization, preheating decomposition, cement clinker burning, cement powder grinding and packaging,Speed reducer gearbox design application, each of ...


    By Sogears

  • Energy and Tires

    Energy consumption is known to be one of the main operational expenses that cement factories have to meet to carry out the production cycle of concrete. The process leading to the development of clinker from raw materials is a special baking made with appropriate kilns that work 24 hours a day. ...


    By SatrindTech Srl

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you