cement kiln technology Articles

  • Suspension Burning for Tire Fuel Optimization in Precalciner Cement Kilns

    Synopsis: A presentation on optimizing substitution rates of Tire Derived Fuel (TDF) in precalciner kilns using Suspension Burner technology.  Discussions will be made on the challenges faced by both preheater and precalciner kilns using TDF on the feed shelf, technical measures aimed at solving these limitations, achieving high TDF ...


    By AFS Technology

  • Air Rule for Cement Kilns Requires 92 Percent Cut in Mercury Emissions

    Portland cement kilns will be required to reduce emissions of mercury by 92 percent as part of an Environmental Protection Agency final rule announced Aug. 9 that imposes controls for several toxic pollutants. Although most of the emissions standards in the final rule are less stringent than what the agency had proposed in 2009, the cement industry said the cost to operate the required controls ...


    By Ohio Lumex

  • Why Shaft Kiln and Rotary Kiln Has Many Differences in Property?

    The high quality shaft kiln performance compared with the high quality of rotary kiln; there are many differences between them both semi-finished products internal quality of cement and as the final product quality performance characteristics of concrete. The following is the differences of the cement performance. Firstly .The differences of the cement performance. 1, shaft kiln cement long ...


    By Fote Machinery

  • End-of-life Tires as an Alternative Fuel (TDF) in Cement Kilns: Now Easier than Ever!

    End-of-life tires are a challenging type of waste since they are difficult to shred and are expensive to treat and get rid of. However, tire derived fuel TDF is an extremely good alternative to the traditional fuels used in cement kilns, like oil, coal, and petroleum coke. The following blog presents a solution and explains how TDF can be used for heating cement kilns. ...


    By Tana Oy

  • Cementing the PC MACT

    On September 9, 2010, the U.S. EPA promulgated the final amendments to the National Emissions Standard for Hazardous Air Pollutants from Portland Cement Manufacturing Industry (40 CFR 63 Subpart LLL), also known as the PC MACT. EPA’s self-proclaimed “historic” rulemaking includes some important implications for cement manufacturers and other sources that may be subject to ...


    By Trinity Consultants

  • Continuous Mercury Monitoring Benefits Cement Plants

    Antti Heikkilä from Gasmet Technologies highlights the challenges faced by mercury monitoring in cement kilns, and explains how a new continuous mercury monitoring system addresses these issues and provides process operators with an opportunity to improve environmental performance and demonstrate compliance with forthcoming legislation. Background The production of cement ...


    By Gasmet Technologies Oy

  • What Should be Noted when Using a Rotary Kiln?

    Rotary kiln for sale is the core of the whole cement production line and the technical management plays a vital role in the stable and continuous operation of rotary kiln. Here Kefan Machinery gives a summary to the possible failure and solutions in ...

  • Cement Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • What Do You Know about Dry and Wet Types Rotary Kiln?

    The dry and wet types dry and wet types rotary kiln is not only important equipment in cement making production line, but also the heart of cement enterprise. We must use and maintenance for dry and wet types rotary kiln, and ensure the normal and the long-term safety operation. In view of equipment management, the straightness of dry and wet types rotary kiln centerline and the inclined Angleall ...


    By Fote Machinery

  • Practical Buying Guide When You Need Rotary Kiln From kefan

    Rotary kiln for sale is to point to rotating calcining kiln, is a kind of mining machinery widely used in building material, metallurgy, chemical, environmental protection and many other production industry. Often do mechanically, physical or chemical processing of solid materials. At present, there are many rotary kiln ...

  • A Case Study in Implementation of the National Emission Standard for Hazardous Air Pollutants for the Portland Cement Industry at a Major Source

    The regulations at 40 CFR 63, Subpart LLL are commonly known as PC MACT because the rule establishes the maximum available control technology for hazardous air pollutants (HAPs) from portland cement plants in the United States. There are 188 HAPs specified in Section 112 of the Clean Air Act Amendments of 1990. Two classifications of HAP emitters are specified in 40 CFR 63. Major sources of HAPs ...


    By Trinity Consultants

  • Landfills types of technologies for converting LFG into Energy

    A number of factors, including the availability of an energy market, project costs, potential revenue sources, and other technical considerations, can determine which technologies are most appropriate for a particular landfill gas-to-energy (LFGE) project. Technologies for converting LFG into energy include the following. Electricity Generation Approximately 70 percent of the LFGE ...


    By Waste Advantage Magazine

  • Mining Company

    This Pavilion customer is a leading producer of primary aluminum, fabricated aluminum and alumina serving numerous industries including: the automotive, packaging, building and construction, commercial transportation and industrial markets. The facility aimed to increase efficiencies of its kilns during its aluminum fluoride production. Based on their history of successfully delivering similar ...


    By Rockwell Automation, Inc.

  • Waste co-incineration in the European Community, is the sky the limit?

    The co-combustion of waste in industrial furnaces -co-incineration- attracts considerable interest in the European Community, because of the combination of perceived business incentives, regulatory developments, and the slate of available technological options. It was found, however, that EU-regulation developed to ensure safe and environmentally acceptable processing of waste represents a clear ...

  • Speed reducer gearbox design application that we can supply and manufactures

    1.IntroductionCement production line is a complex production line specializing in the production of cement production line. This production line mainly consists of the processes of crushing and preparation homogenization, raw material preparation homogenization, preheating decomposition, cement clinker burning, cement powder grinding and packaging,Speed reducer gearbox design application, each of ...


    By Sogears

  • PC MACT proposal may signal widespread change

    On May 6, 2009, EPA proposed amendments to the National Emission Standards for Hazardous Air Pollutants from the Portland Cement Manufacturing Industry (PC MACT) in response to numerous petitions and court mandates. The proposed revisions present significant challenges to the portland cement industry by establishing a new lower maximum achievable control technology (MACT) floor that would require ...


    By Trinity Consultants

  • Study Charts a Future for Waste-Derived Fuels

    Pointers to possible future EU policy initiatives to give co-incineration facilities burning waste-derived fuels a strategic role in waste management have emerged in a study for the European Commission.1 The report suggests a policy focus on promoting source separation of municipal wastes, active discouragement of mass burn incinerators, and a levelling of the regulatory playing-field for ...

  • The Scavenger: getting more out of shredder fractions

    Driven by the goal of enabling complete separation of shredder light fraction into streams with their own singular characteristics, work at Belgium-based recycling technology specialist AD REM has culminated in the launch of its latest piece of equipment - the Scavenger. This new development is also designed to process shredder heavy fraction eddy current drops. The initial objective when ...


    By AD REM N.V. (Valtech Group)

  • Towards a complete recycling of phosphorus in wastewater treatment – options in Germany

    Global reserves of mineral phosphorus are finite and the recycling of phosphorus from wastewater, a significant sink for phosphorus, can contribute to a more sustainable use. In Germany, Switzerland, and the Netherlands, an increasing percentage of municipal sewage sludge is incinerated and the contained phosphorus is lost. This paper reviews current technologies and shows that a complete ...


    By IWA Publishing

  • Cemex plant Ruedersdorf - Case Study

    CEMEX Deutschland AG is one of the biggest producers of ready-mixed-concrete, cement and minerals. In Germany CEMEX employs a staff of approximately 3,200 people and is part of the International CEMEX Group with a head count of 50,000. After the German re-unification the Company acquired the existing cement plant in Ruedersdorf. Investments to save CEMEX invested ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you