cems system consulting Articles

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • Managing continuous emissions monitoring systems

    With recent rulemaking governing compliance determinations in regards to the emissions of nitrogen oxides (NOx) and highly reactive volatile organic compounds (HRVOCs), the Texas Commission on Environmental Quality (TCEQ) required more frequent monitoring which resulted in the installation of more monitoring systems at the facility. This large Gulf Coast refinery decided to utilize the ...

  • Managing Continuous Emissions Monitoring Systems

    Untitled Document With recent rulemaking governing compliance determinations in regards to the emissions of nitrogen oxides (NOx) and highly reactive volatile organic compounds ...


    By Trinity Consultants

  • Navigating NSPS subpart Db for boilers: a case study

    Over the past year, Trinity assisted a chemical company with the permitting and installation of a new 220 MMBtu/hr package boiler. The new natural gas-fired boiler replaces coal-fired units that were installed in the 1940s. Navigating through the numerous, and at times conflicting, regulatory requirements applicable to such a unit has been challenging. With careful planning and implementation, ...


    By Trinity Consultants

  • Utility MACT and HAPs

    C 6.1  | The Utility MACT Rule: An Industry Perspective Michael  Rossler |  Manager, Environmental Programs, EEI EPA is proceeding with the Utility MACT rulemaking for coal- and oil-based EGUs. The ...

  • Environics - Reducing calibration gas cost by up to 60%

    EPA's appendix 'M' 40 CFR 51 reduces calibration gas cost by 60%By: Terrence P. Dunn, President of EnvironicsOn May 30, 1995, the EPA published the final version of Method 205 for inclusion in Appendix M of 40 CFR Part 51 entitled, 'Verification of Gas Dilution Systems for Field Instrument Calibrations.' Continuous emissions monitoring systems (CEMS) require ...


    By Environics, Inc.

  • Facilitating compliance with consent decree requirements using an EMIS

    In late 2008, T3, a division of Trinity Consultants, developed an environmental management information system (EMIS) to manage “near real-time” emissions data at a petroleum refinery. The system is designed to support Consent Decree requirements for compliance demonstrations with air quality regulations at the facility. Functionality delivered includes advanced data gathering, ...


    By Trinity Consultants

  • BureauScope.Com goes live with eSight technology

    BureauScope.com is a new breed of energy management company offering its clients a mix of energy information across the Internet together with a consultancy service to advise on energy savings. Background BureauScope remotely monitors energy consumption for industrial, commercial and public sector sites across Ireland. Key to the company strategy was the need to offer ...


    By eSight Energy

  • Cementing the PC MACT

    On September 9, 2010, the U.S. EPA promulgated the final amendments to the National Emissions Standard for Hazardous Air Pollutants from Portland Cement Manufacturing Industry (40 CFR 63 Subpart LLL), also known as the PC MACT. EPA’s self-proclaimed “historic” rulemaking includes some important implications for cement manufacturers and other sources that may be subject to ...


    By Trinity Consultants

  • Preparing for EPA’s mandatory reporting of greenhouse gases rule

    Recent action by the US EPA to finalize the Mandatory Reporting of Greenhouse Gases (GHG) Rule means that environmental managers must now seriously examine whether they are fully prepared to address the imminent requirements. This article provides some assistance by summarizing key points regarding the final versus proposed rule, providing clarification on key questions that have arisen since the ...


    By Trinity Consultants

  • EPA Proposed “Franken-MACT” for Utilities

    EPA published the highly anticipated proposed Maximum Available Control Technology (MACT) Standard for the utility sector (40 CFR 63 Subpart UUUUU). When considered together with the growing list of proposed and final rules impacting the utility sector (Transport Rule/Cross-State Rule, Coal Combustion Byproducts Rule, Cooling Water Intake Rule, Regional Haze Rule, revised National Ambient Air ...


    By Trinity Consultants

  • GHG Reporting Rule

    G 6.1 | Requirements and Developments in Environmental and Carbon Reporting and Disclosure John Fillo | Senior Engineer, Sentech, ...

  • Proposed boiler MACT sets aggressive emission limits

    On June 4, 2010, U.S. EPA proposed National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions.  EPA proposed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater ...


    By Trinity Consultants

  • EPA finalizes boiler NESHAP

    EPA published the final National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions. EPA developed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater than 25 tpy of ...


    By Trinity Consultants

  • Final CISWI rule

    On March 21, 2011, in parallel with publication of the Boiler National Emission Standard for Hazardous Air Pollutants (NESHAP) rules and the Non-Hazardous Secondary Material (NHSM) rule, EPA promulgated the final updates to the New Source Performance Standards (NSPS) and Emission Guidelines (EG) for Existing CISWI Units, collectively referred to as the “2011 CISWI Rules.”1 The 2011 ...


    By Trinity Consultants

  • EPA proposes updates to CISWI rules

    On June 4, 2010, the U.S. EPA proposed updates to the Standards of Performance for New Stationary Sources (NSPS) for Commercial and Industrial Solid Waste Incineration (CISWI) Units (NSPS Subpart CCCC) and Emission Guidelines (EG) for Existing CISWI Units (EG Subpart DDDD), collectively referred to as the "CISWI Rules." In order to describe the proposed updates to the CISWI Rules, it is necessary ...


    By Trinity Consultants

  • Modeling Tip: Using Hourly Emission File Editor in BREEZE AERMOD

    BREEZE AERMOD includes numerous time-saving tools to help with setting up a modeling run. One of these tools is the Hourly Emission File Editor. This modeling tip explains how to use that tool to easily use refined hourly emission rate data in your AERMOD runs. AERMOD offers many options for capturing the variability of emission rates and other source parameters. Emission rates can be varied by ...

  • New boiler MACT and affiliated rules proposed

    EPA proposed three related rules (with final rules expected by December 16, 2010), intended to reduce the emission of hazardous air pollutants (HAPs) from industrial, commercial, and institutional boilers and process heaters as well as commercial and industrial solid waste incinerators. Simultaneously, it also proposed a definition of solid waste that could potentially affect some units currently ...


    By Trinity Consultants

  • Return of the clean air interstate rule—The court does CAIR

    In summer 2008, the U.S. Court of Appeals for the D.C. Circuit issued a dramatic decision to vacate the Clean Air Interstate Rule (CAIR) in its entirety (North Carolina v. EPA, No. 05-1244, D.C. Cir., July 11, 2008). Following a petition for rehearing, it seems the previous vacatur was just a temporary detour, as the Court reinstated CAIR on December 22, 2008. The reinstatement appears to turn ...


    By Trinity Consultants

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you