centrifugal slurry pump Articles

  • Less and More : Why You Should Pump Slurries with a Peristaltic Pump

    LESS WATER Peristaltic Pumps Use Less Water Hose pumps can circulate slurry SGs of 1.6 to 1.8 or up to 80% solid content. The traditional centrifugal pump loses efficiency when the slurry SG reaches 1.3 or 30% solids. With this limitation, slurry pumps have significant process water demands : on a plant processing 70 tonnes of ore per hour, every time a hose pump replaces a ...

  • The influence of ash concentration on change of flow and pressure in slurry transportation

    This paper presents the results of the tests on the most suitable concentration for the ash and the bottom ash hydromixture transport. The tests were carried-out at the semi-industrial installations at the Mineral Processing Laboratory of the University of Belgrade. As the decisive parameters, the change of the flow and the pressure in the relation to the concentration change were analysed. The ...


    By Inderscience Publishers

  • Pump Performance Checklist

    Keeping your pump in shape will help reduce costs and boost profits! Cut fuel consumption, reduce replacement parts costs and minimize pumping time on every job! A PUMP THAT LETS YOU DOWN when you need it most causes obvious losses of time and money. Not so obvious, but every bit as costly, are losses you can incur with pumps that operate at less-than-peak efficiency. A pump ...


    By Gorman-Rupp Co.

  • Mine Dewatering - The real value of the pumps selected is in the support that comes with them

    Reliable Equipment Depends on Strong Dealer Support When referring to the mining industry, the use of a specialized pumping company that not only supplies equipment, but also understands and provides the support required can play an integral component to the success of a project. This is especially true when working in remote northern areas where down time, has serious schedule and cost ...


    By Aquatech Dewatering Company

  • Kerr-McGee dredging case study

    Application:Clean and dredge paint pigment residuals Dredge Used: LWT 7MAU Series Pit Hog™ Dredge Project Summary: Electric manned automated dredge with 3 Krebs cyclones with a capacity of 2,100 gpm, magnetic flow meter to monitor pump performance, slurry density meter to maintain consistent percent solids by varying traverse speed, and ...

  • FLOTTWEG SORTICANTER® for Plastic recycling

    How many times each day do you use something made out of plastic? From a toothbrush to a soda pop bottle, from a grocery bag to a garden hose, plastics are part of our daily life. Needless to mention the huge amount of waste plastics generated in the industry. You probably know that plastics are made from petroleum, a non-renewable resource. When plastics are thrown away, they become part of the ...


    By Flottweg SE

  • Hydraulic Dredging: A cost effective solution for most dredging tasks

    The vast majority of dredging jobs require removal of solids to depths of 30 feet or less. Several features enable hydraulic dredges to be the solution of choice for these applications. First, what are hydraulic dredges and how do they compare with alternative mechanical dredge types? Hydraulic dredges create slurries, combinations of solids and water, pump the slurries to the ...


    By SRS Crisafulli, Inc.

  • Case study - Complete Utilities, Gloucestershire

    Material Source: Excavation and trenching waste from the utilities industries. Equipment Installed: Powerscreen Commander 1400 Feeder, Powerscreen Aggwash, DUO Mobile Water Treatment System (inc. centrifuge, clarified water tank, sludge tank and low-level thickener. Project Requirements: Complete Utilities required a washing and ...


    By DUO (Europe) plc

  • Case study - Nottinghamshire Recycling

    DUO Equipment delivered and installed a new full washing and water management plant for Nottinghamshire Recycling Ltd (NRL). Based in Worksop, Nottinghamshire, NRL is a sustainable waste solution provider processing C & D waste, green waste, wood and recycled aggregates. The new washing and water management plant (which includes a Gennaretti centrifuge system) will provide NRL with the ...


    By DUO (Europe) plc

  • Tailings paste disposal – more than water recovery

    The minerals industry has faced increasing pressures in recent years in the management of tailings streams. Environmental, economic and other factors have led many minerals producers to explore the technology of making and using “paste.” With the increasing number of installations worldwide, this technology has proved to not only be industry accepted, but economically advantageous. ...


    By WesTech Engineering, Inc.

  • Removing Struvite from wastewater systems

    Named after Henrich Christian Gottfried Von Struve, who discovered the magnesium ammonium phosphate crystals in medieval sewer systems in Hamburg in 1845, struvite is a major problem for waste water treatment plants. The hard, crystalline deposit forms scale on lines and belts, in centrifuges and pumps.  It also clogs system pipes and other equipment including anaerobic ...

  • Milling filter cakes - Cutting instead of pressing to achieve more uniform particle size

    There are various methods of separating solids from a suspension. These include filtration, centrifuging and drying. In most cases, further processing of the resulting products cannot be carried out directly. They have to be reduced to the right particle size by means of a mill. This can be done with a Gericke Nibbler, which shreds the filter cakes efficiently using a basket and screen assembly. ...


    By Gericke

  • Muddy waters

    Mark Zwinderman of Surface Active Solutions, looks at the dangers involved in the cleaning and maintenance of mud tanks and associated equipment The oil industry involves many thousands of people working daily in potentially hazardous circumstances with dangerous chemicals and sophisticated engineering equipment. There has been a consistent and determined drive by the industry to reduce the ...

  • The Clog Blog

    Clogging and over pressuring are definitely problematic for Liquid Chromatography columns. Back in 2005 John Dolan’s sage advice to chromatographers to make an LC column last forever was simple, “Never open the box!” As John pointed out, this is not practical and I have to agree. But as an LC column manufacturer I have seen remarks from customers regarding clogging as though it ...


    By Restek Corporation

  • Case study - CEMEX - Kingsmead

    At its Kingsmead site, near Horton in Berkshire, where CEMEX produces aggregates to service its concrete plant and to supply the market place, new plant has increased both throughput and flexibility. The 40 hectre Kingsmead site, owned and operated by CEMEX UK has extensive reserves of sand and gravel and has been recently redeveloped as part of its current national investment programme of over ...


    By DUO (Europe) plc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you