centrifuge liquid-solid separation Articles

  • Principles of Solids Control

    Although the use of drilling fluids within the HDD / trenchless industry is still relatively new, recent trends suggest that this standard is shifting as solids control is one of the most important phases in the drilling process. This shift is due to a growing awareness that drilling fluid maintenance and disposal can become exponential problems as they are both harmful to the environment and ...


    By Elgin Separation Solutions

  • A smarter approach to solids control

    When looking at technical brochures and marketing materials in regards to solids-control equipment, one question that should always come to mind should be: Is this really necessary? Other great questions to ask are: What are my day-to-day needs; and what are my severe, high-duty needs? Finding the right solidscontrol equipment is much like buying a personal automobile. Most vehicles’ ...


    By Elgin Separation Solutions

  • What Centrifuge Is Best For You?

    With the largest portfolio of centrifuges in the UK, it can be difficult to decide which one is right for you. Fortunately Centurion Scientific is here to help; here is a helpful checklist to help you decide which of our products is best for you. The Centurion Checklist This checklist fundamentally consists of with three basic questions in order to help you ...


    By Centurion Scientific Limited

  • The development and application of centrifugal flotation systems in wastewater treatment

    Flotation as a wastewater treatment technique is designed to remove all particles generally encountered as very fine emulsions, suspended solids, and colloids from wastewater. Historically, Dissolved Air Flotation (DAF) has been used to achieve this removal. More recently, other flotation techniques such as induced air, electro, cavitational, and Centrifugal Flotation Systems (CFS) have been ...


    By Inderscience Publishers

  • Centrifuge Technology in Drilling Fluid Recycling

    Drilling fluid additives and the water that contains them are an essential part and expense of successfully completing a horizontal directional drilling (HDD) installation, and the longer the bore and larger the product being installed, the more drilling fluids cost. Therefore, it makes economic sense to recycle drilling fluids by removing cuttings and recirculating the cleaned ...


    By Elgin Separation Solutions

  • Optimizing drilling efficiencies with a solids control system

    The correct solids control system can improve drilling rig efficiency, reduce costs and minimize the environmental footprint of your operation Although the use of drilling fluids within the HDD / trenchless industry is still relatively new, recent trends suggest that this standard is shifting as solids control is one of the most important phases in the drilling process. This shift is due ...


    By Elgin Separation Solutions

  • The Application of Waste Solids Management Vertical Cuttings Dryers as an integral element of a successful Solids Control System

    In Elgin’s last White Paper, “Common Challenges Relative to the Use of Decanter Centrifuges for Barite Recovery in the Oil & Gas Industry,” a detailed discussion was offered about the complexities involved in achieving effective solids control when deploying a dual-centrifuge “barite ...


    By Elgin Separation Solutions

  • The development and application of centrifugal flotation systems in wastewater treatment

    Abstract: Flotation as a wastewater treatment technique is designed to remove all particles generally encountered as very fine emulsions, suspended solids, and colloids from wastewater. Historically, Dissolved Air Flotation (DAF) has been used to achieve this removal. More recently, other flotation techniques such as induced air, electro, cavitational, and Centrifugal Flotation Systems (CFS) have ...


    By Clean Water Technology, Inc.

  • The development and application of the hybrid centrifugal - dissolved air flotation system for wastewater treatment

    Abstract Solid/liquid separations are integral part of any wastewater treatment system. Particles heavier than water are commonly separated in sedimentation clarifiers. On the other hand, particles with densities lower than that of water are most often separated with flotation systems. This manuscript describes the development of hybrid centrifugal - dissolved air flotation system. The ...


    By Clean Water Technology, Inc.

  • VSEP concentrates pigment additives to 70% solids and provides quick payback

    A manufacturer of membrane filtration and solids separation equipment, New Logic International Inc., (New Logic) of Emeryville, CA has now several new and existing projects with major high solid inorganic chemical producers for the use of its technology. New Logic’s Vibratory Shear Enhanced Process (VSEP) is being used for the dewatering of high solid inorganic chemical streams and recovery of ...


    By New Logic Research, Inc.

  • Common challenges relative to the use of Decanter Centrifuges for barite recovery in the oil & gas industry

    When centrifuges are properly deployed, they can have dramatic effects on drilling performance. In fact, without them, many of the advances made in drilling would not have been considered achievable. Classically, we believe that centrifuges can achieve two common goals: Reduce the content of drilled fines, specifically colloidal solids, and Perform barite recovery in order to reduce ...


    By Elgin Separation Solutions

  • CFD modelling of flow field and particle tracking in a hydrodynamic stormwater separator

    The best management practices (BMPs) for control of urban stormwater pollution are evaluated to remove solid particles containing various pollutants. Currently, most storm runoff treatment devices using primary pollutant removal mechanism are applied to storm water since most pollutants in runoff are associated with the solid particulates. A hydrodynamic separator is a storm water treatment ...


    By IWA Publishing

  • New FRP-casing for a decanter centrifuge at Lubrizol Advanced Materials Resin B.V., The Netherlands - Case Study

    Bulletproof innovation Creating a safe, corrosion-proof centrifuge case in Fiberglass Reinforced Plastic (FRP) ...

  • High-quality separation technology in urban mining for Brantner Environment Group Gmbh, Austria - Case Study

    Hidden treasure, zero waste An enhanced separation system for a cutting-edge recycling plant ...

  • FLOTTWEG SORTICANTER® for Plastic recycling

    How many times each day do you use something made out of plastic? From a toothbrush to a soda pop bottle, from a grocery bag to a garden hose, plastics are part of our daily life. Needless to mention the huge amount of waste plastics generated in the industry. You probably know that plastics are made from petroleum, a non-renewable resource. When plastics are thrown away, they become part of the ...


    By Flottweg SE

  • A review on sludge dewatering indices

    Dewatering of sludge from sewage treatment plants is proving to be a significant challenge due to the large amounts of residual sludges generated annually. In recent years, research and development have focused on improving the dewatering process in order to reduce subsequent costs of sludge management and transport. To achieve this goal, it is necessary to establish reliable indices that ...


    By IWA Publishing

  • Energy from waste: the recycling of limed fleshings

    Leather products have been around a long while - there are those who claim that it is the second oldest business in the world. Going back a few millennia, when our earliest ancestors decided that sitting on hard rock was not a soft option, they turned to other materials in order to create more comfortable seating, as well as warmer bedding and improved clothing. Animal skins became the fabric ...


    By Flottweg SE

  • Usen

    “Oil is not only an important sector of our industry but also a symbol of the independence of our country, of the hope for a better future”. These were the words of President Nursultan Nasarbayev in September 1999, commemorating the 100th anniversary of the formation of the oil and gas industry. The oil industry in Kazakhstan has existed for more than 100 years, however a significant boom in this ...


    By Flottweg SE

  • Sanitary Pump Application

    Sanitary pumps involve the delivery of all human contact products such as pharmaceuticals, dairy products, beverages, foodstuffs, cosmetics, food additives, fine chemicals and the like. There are four basic types of sanitary pumps, centrifugal, volumetric, jet and air. Centrifugal ...


    By Adamant Valves

  • Give it a Whirl

    The oil and gas industry uses so-called cyclones to separate mixtures of solids, fluids, or gases by centrifugal forces. The company ASCOM that was acquired by Sulzer in 2014 has developed a new generation of compact cyclonic separators with a large operating range. This equipment can be used inline inside pipe segments, replacing conventional technology that requires several large vessels. ...


    By Sulzer Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you