centrifuge liquid-solid separation system Articles

  • Separation principle of decanting centrifuge

    KOSUN DC series decanting centrifuge is used in separating suspension of solids phase with particle diameter(d≥2μm) for drilling mud and fluids handling. Ruggedly built for oilfield and industrial services, it is especially effective in environmentally sensitive areas. It delivers high fluid-recovery rates and ...


  • The development and application of centrifugal flotation systems in wastewater treatment

    Flotation as a wastewater treatment technique is designed to remove all particles generally encountered as very fine emulsions, suspended solids, and colloids from wastewater. Historically, Dissolved Air Flotation (DAF) has been used to achieve this removal. More recently, other flotation techniques such as induced air, electro, cavitational, and Centrifugal Flotation Systems (CFS) have been ...


    By Inderscience Publishers

  • The development and application of centrifugal flotation systems in wastewater treatment

    Abstract: Flotation as a wastewater treatment technique is designed to remove all particles generally encountered as very fine emulsions, suspended solids, and colloids from wastewater. Historically, Dissolved Air Flotation (DAF) has been used to achieve this removal. More recently, other flotation techniques such as induced air, electro, cavitational, and Centrifugal Flotation Systems (CFS) have ...

  • Decanter centrifuge of accelerated settling

    A decanter centrifuge operates on the principle of accelerated settling. Particles will settle in a viscous media according to stoke’s low, ...


  • The development and application of the hybrid centrifugal - dissolved air flotation system for wastewater treatment

    Abstract Solid/liquid separations are integral part of any wastewater treatment system. Particles heavier than water are commonly separated in sedimentation clarifiers. On the other hand, particles with densities lower than that of water are most often separated with flotation systems. This manuscript describes the development of hybrid centrifugal - dissolved air flotation system. The ...

  • Centrifuge Technology in Drilling Fluid Recycling

    Drilling fluid additives and the water that contains them are an essential part and expense of successfully completing a horizontal directional drilling (HDD) installation, and the longer the bore and larger the product being installed, the more drilling fluids cost. Therefore, it makes economic sense to recycle drilling fluids by removing cuttings and recirculating the cleaned ...


    By Elgin Separation Solutions

  • KOSUN decanter centrifuge overseas business in America

    KOSUN has expanded its overseas market. It has founded a branch in America. So, for the America market, the clients can access to choose KOSUN solids control equipment. As the hottest product, decanter centrifuge must be welcomed. KOSUN has high efficient decanter centrifuge, which operated by spinning closed containers of the mixture around a central point. The force of decanter ...


  • Maintenance of Oilfield Drilling Mud Decanter Centrifuge

    Decanter centrifuge is widely used in drilling mud separation to separate smaller solid particles after the equipment processing such as drilling mud shale shaker and drilling fluids mud cleaner or desander and desilter. Usually, decanter centrifuge is equipped with screw pumps or slurry pumps to feed drilling mud to ...


  • Mud desanders and desilters used in solids control system

    Mud desander is the second stage in the operation of drilling solid control equipment, commonly used is 10"and 12" cyclones. Oilfield mud desander is mainly used for the separation of solid particles in drilling fluid to particle size 45-74 microns in diameter. According to the processing capability, the ...


  • Optimizing drilling efficiencies with a solids control system

    The correct solids control system can improve drilling rig efficiency, reduce costs and minimize the environmental footprint of your operation Although the use of drilling fluids within the HDD / trenchless industry is still relatively new, recent trends suggest that this standard is shifting as solids control is one of the most important phases in the drilling process. This shift is due ...

  • Solids Control for Drilling Mud Process System

    Nowadays, more and more drilling contractors recognize solids control’s importance to oil and gas drilling, HDD, CSM/CBM exploration, etc. How does solid control affect well drilling? Please find the following details. Cost Comparison of Two Oil Well Drilling Let’s find the difference of two kinds of oil well drilling with and without solids control system. Final effect or result is ...


  • The Application of Waste Solids Management Vertical Cuttings Dryers as an integral element of a successful Solids Control System

    In Elgin’s last White Paper, “Common Challenges Relative to the Use of Decanter Centrifuges for Barite Recovery in the Oil & Gas Industry,” a detailed discussion was offered about the complexities involved in achieving effective solids control when deploying a dual-centrifuge “barite ...


    By Elgin Separation Solutions

  • Common challenges relative to the use of Decanter Centrifuges for barite recovery in the oil & gas industry

    When centrifuges are properly deployed, they can have dramatic effects on drilling performance. In fact, without them, many of the advances made in drilling would not have been considered achievable. Classically, we believe that centrifuges can achieve two common goals: Reduce the content of drilled fines, specifically colloidal solids, and Perform barite recovery in order to reduce ...


    By Elgin Separation Solutions

  • A smarter approach to solids control

    When looking at technical brochures and marketing materials in regards to solids-control equipment, one question that should always come to mind should be: Is this really necessary? Other great questions to ask are: What are my day-to-day needs; and what are my severe, high-duty needs? Finding the right solidscontrol equipment is much like buying a personal automobile. Most vehicles’ ...


    By Elgin Separation Solutions

  • Principles of Solids Control

    Although the use of drilling fluids within the HDD / trenchless industry is still relatively new, recent trends suggest that this standard is shifting as solids control is one of the most important phases in the drilling process. This shift is due to a growing awareness that drilling fluid maintenance and disposal can become exponential problems as they are both harmful to the environment and ...


    By Elgin Separation Solutions

  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • Removing Struvite from wastewater systems

    Named after Henrich Christian Gottfried Von Struve, who discovered the magnesium ammonium phosphate crystals in medieval sewer systems in Hamburg in 1845, struvite is a major problem for waste water treatment plants. The hard, crystalline deposit forms scale on lines and belts, in centrifuges and pumps.  It also clogs system pipes and other equipment including anaerobic ...

  • Packaged Polymer Injection Dewatering System - Case Studies

    Case Study Number 1 Industry: Oil & Gas, Mining and Civil Waste Management Application: Treatment of Waste Drilling Fluids for Recycling Location: Brisbane, Australia Configuration: 20’ Explosion Proof HMI Dewatering System with VFD Driven EE-1448HD Centrifuge. Objective: Wastewater Treatment Sludge Dewatering in Order to Facilitate Landfill ...


    By Elgin Separation Solutions

  • Project profile - Westview Elementary and High Schools Topeka, Indiana arsenic treatment systems

    Background In early 2006, AdEdge Technologies Inc. (AdEdge) teamed up with Hawkins Water Tech to design and implement two full-scale arsenic treatment projects for Westview Elementary School and Westview High School located in Topeka, Indiana. Arsenic concentrations in the school wells range between 21 and 23 ppb, which exceeded the new Federal EPA standard of 10 ppb. Design plans were ...

  • Reverse Osmosis: How Does It Figure Into a Dialysis Water System?

    Better than 95% of all dialysis centers use water purification equipment to purify water for dialysis. The centerpiece of these water purification systems has become reverse osmosis. In conjunction with sound pretreatment, RO has proven itself to be the safest, most reliable, and most economical method of purifying water for dialysis. Water plays an important, life-sustaining role for dialysis ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you