ceramic membrane manufacturer Articles

  • Ceramic membranes with higher abrasion resistance

    High flux rates, combined with a very high chemical and thermal resistance and the resulting operational reliability - these are the reasons why users worldwide opt for ceramic membranes. Up to now, the only parameter where ceramic membranes performed well but not excellent was abrasion resistance. Therefore, filtering of abrasive matter required pre-treatment stages such as prefiltration, ...


    By atech innovations gmbh

  • CeraQTM Ceramic Membranes Provide Robust Solution For Automotive Parts Manufacturing

    Project Background Ceramic membranes are growing in acceptance into the water and wastewater treatment industries due to their ability to operate at higher temperatures and wide chemical compatibility. This characteristic allows the membranes to be operated in high temperature appli- cations, difficult waste streams and applications where harsh cleaning chemicals are ...


    By QUA Group LLC

  • Oxygen-separation membranes could aid in CO2 reduction

    Ceramic membranes may reduce carbon dioxide emissions from gas and coal-fired powerplants. Written by Jennifer Chu, MIT News Office.You can read the original new in MIT NewsIt may seem counterintuitive, but one way to reduce carbon dioxide emissions to the atmosphere may be ...

  • Membranes in the Fast Lane – QUA CeraQ Featured in Water and Wastes Digest (W&WD)

    Membranes in the Fast Lane – Ceramic membranes provide solution for auto parts manufacturing process Our CeraQ™ Ceramic Membrane was recently featured in Water and Wastes Digest (W&WD)’s September 2016 Issue. In this ...


    By QUA Group LLC

  • Basic Principles of Microfiltration

    Microfiltration can be defined as the separation of particles of one size from particles of another size in the range of approximately 0.01 µm through 20 µm. The fluid may be either a liquid or a gas. Microfiltration media are available in a wide variety of materials and methods of manufacture. They can be rated either 'absolute' or 'nominal' depending upon the percentage of capture of particles ...

  • VSEP recycles used motor oil at 90°C providing a filtrate suitable for use as marine grade diesel fuel or lube oil feedstock

    A unique membrane filtration system was installed in July 2001 at a major waste oil re-refining operation in Portland, Oregan. The system manufactured by New Logic Research, Inc. of Emeryville, California near San Francisco, is being used to process used crankcase waste oil and produce filtrate that can be sold as a higher value bunker oil. The V��SEP, (Vibratory Shear Enhanced ...


    By New Logic Research, Inc.

  • QUA Featured in Industrial Waterworld’s “Driving Process Water Efficiency in the Automotive Industry” article

    QUA was recently featured in Industrial Waterworld’s June 2016 article about water efficiency in the automotive industry. Fred Wiesler discussed the growing needs of the industry and spoke of QUA’s membrane solution offerings in this article. “Vehicle manufacturing processes, including both assembly plant and parts and component operations, require significant ...


    By QUA Group LLC

  • Nano this and Nano that?

    Several terms, each with the prefix “nano-”, are now in use in the fields of filtration and its related separation processes, and it is important to be able to differentiate among their nuances of meaning. Firstly, there is nanometer itself, from which the others derive, and which is precise, measuring one thousandth of a micrometer or one millionth of a millimeter. It is thus a very ...

  • Solid / gas separation with fabric filters

    A myriad of filter media are utilized today for separation of particulate matter in industrial gas filtration applications. These media range from single use (deposable) to semi-permanent media and include fiber, fabric, ceramic, membrane, metal mesh, and sintered metal media. Semi-permanent media are usually cleanable, either on or off-line, and are primarily intended for long-term (up to ...

  • Titanium Scrap Metal Processing

    Background A world-class processor of titanium scrap had a wash system whose cleaning solution was becoming contaminated with both free floating unemulsified tramp oil and emulsified water soluble oil that was being washed off of titanium turnings. As the level of oil contamination increased over time in the wash solution, cleaning effectiveness diminished. The processor uses a metric, ...

  • Custom-designed belt skimmer meets unique needs of large international automaker

    Graham Smith, a sales engineer for the UK division of Abanaki Corporation, Oil Skimmer Division, headquartered in Chagrin Falls, OH, was called upon by a large Japanese automaker with operations in Europe to solve a unique problem—retrieving automotive wax and reclaiming water at the end of an extremely busy production line. The engineer discovered a unique situation. At the end of the ...


    By Abanaki Corporation

  • Hyde ultrafiltration for tumbling/vibratory deburring applications

    Challenge Fabrication manufacturer has an issue with discharging tumbling water from two vibratory deburring systems. Customer Hartzell Manufacturing Industry Medical, Electronic and Bank Security Product Hyde Ultrafiltration System Business Benefits Realized ...


    By PRAB, Inc

  • New Products Archives

    Product: PURELAM® A-9000/A-9010 solventless laminating adhesive Manufacturer: Ashland Specialty ...


    By Actio Corporation

  • pH Probe Maintenance

    The success or failure of pH measurement depends on the proper application of the probe and proper subsequent maintenance of the probe. The procedures described within apply to the most common pH probe in use today and that is the flat surface combination pH probe. The most common failure mode associated with pH probes is breakage. The pH electrode is a very thin glass membrane that is easily ...


    By Digital Analysis Corp.

  • Tech update: Plant instrumentation - food engineering

    Sensors and other devices are the foot soldiers in automation architecture, but most food and beverage manufacturers still are looking for full value. You know an equipment category has arrived when it starts getting its own industry-specific center. For the food production sensors that do the heavy lifting in instrumentation technology, that day could arrive earlier rather than ...


    By Hardy Process Solutions

  • Skimming Oily Wastewater

    As large generators of oily wastewater tighten effluent controls, the U.S. Environmental Protection Agency (EPA) is targeting smaller generators. Some of the firms receiving their attention are smaller manufacturing plants, automotive garages, mobile equipment service shops and truck farms. Many of these firms do not have access to a sanitary sewer system that will accept oily wastewater. Because ...


    By Abanaki Corporation

  • BioLargo`s AOS Filter Wins `Technology Star Award` - New Technology Magazine -The First Word on Oil Patch Innovation

    Advanced disinfectant technology developer sets sights on oil and gas applications A small publicly-listed Santa Ana, Calif.–based company that is developing water purification and advanced disinfectant technologies, all using some form of iodine, sees one of its Edmonton-developed technologies as a way to clean up and even eliminate oilsands mining tailings ...


    By Biolargo, Inc.

  • Thematic Issue: Nanomaterials’ Functionality

    Nanomaterials: addressing the challenges, benefiting from the opportunities Some of the deepest challenges we will face in the coming decades derive from the opportunities offered by emerging technological advances. Many of these will improve our quality of life, and develop our economies, but all will be measured against the overarching principle that we do not make some error, and harm ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you