chamber analyzer Articles

  • Forklift Emissions Analyzers

    Forklifts are commonly used in warehouses of various size and capacity for the movement and shipping of goods; however, the unoptimized engines can produce excess quantities of silent and deadly CO gas that can risk the health and safety of the workers. When forklifts are brought in for service usually the CO gas isn't measured. If the CO gas isn't measured and the engine properly optimized then ...

  • Argon and Nitrogen in Glove Boxes and Blanketed Chambers case study

    Application Moisture is measured in argon or nitrogen when it is used as a blanketing gas in glove boxes and other blanketed applications. Problem The presence of moisture in the blanket gas for a glove box causes serious contamination problems especially when welding or conducting moisture-sensitive chemical reactions. Moisture causes product contamination, ...

  • Disinfection performance testing of high-efficiency ultraviolet water treatment chamber

    When introducing a disinfection product which incorporates new technology, it is essential that the methods and testing used to quantify the performance of those systems follow protocols which are technically sound and which are accepted by the scientific and technical community within the industry. These protocols must be applied precisely and rigorously in order to ensure accurate, repeatable ...


    By NeoTech Aqua Solutions, Inc.

  • Factors affecting the performance of a single-chamber microbial fuel cell-type biological oxygen demand sensor

    Microbial fuel cells (MFCs) are devices that exploit microorganisms as biocatalysts to degrade organic matter or sludge present in wastewater (WW), and thereby generate electricity. We developed a simple, low-cost single-chamber microbial fuel cell (SCMFC)-type biochemical oxygen demand (BOD) sensor using carbon felt (anode) and activated sludge, and demonstrated its feasibility in the ...


    By IWA Publishing

  • PureAire Oxygen Analyzer for 3D Printers: How Argon is used and Why O2 Detection is Required

    Thanks to new technologies, the 3D printers that have been used to create plastic three-dimensional objects can now print metal. Titanium 3D printing is possible thanks to a technique called DMLS, or Direct Metal Laser Sintering. While the potential to use titanium 3D printing is groundbreaking for many industries, the new advances could pose a health hazard if volatile gases used in the printing ...

  • Canopy gas exchange measurements of cotton in an open system

    A portable, open transparent chamber system for measuring canopy gas exchanges was developed and tested. Differentials between incoming and outgoing atmospheric H2O and CO2 concentrations were used to calculate canopy transpiration (E) and net assimilation (A) at 10-s intervals using solenoid valve actuated sample lines connected to an infrared gas analyzer. A programmable data logger controlled ...

  • Soil CO2 Flux Measurements -- Using the LI-8100 System to Collect Air Samples for Estimating Soil Trace Gas Flux

    Air samples can be collected from the same air stream used to measure soil CO2 flux with the LI-8100 Automated Soil CO2 Flux System, for estimating the flux of trace gas, such as methane (CH4), ammonia (NH3), nitrous oxide (N2O), isotopic species, etc. This application note describes a simple method for obtaining air samples from the LI- ...


    By LI-COR

  • Optimization of lamp arrangement in a closed-conduit UV reactor based on a genetic algorithm

    The choice for the arrangement of the UV lamps in a closed-conduit ultraviolet (CCUV) reactor significantly affects the performance. However, a systematic methodology for the optimal lamp arrangement within the chamber of the CCUV reactor is not well established in the literature. In this research work, we propose a viable systematic methodology for the lamp arrangement based on a genetic ...


    By IWA Publishing

  • The Pitfalls of Process TOC analysis and how to avoid them case study

    Since the introduction of Total Organic Carbon (TOC) Analyzers by Dow, Union Carbide and Automated Environmental Systems in thel960,s,l-5\ they have proven to be an invaluable tool in the environmental and process monitoring fields. While technologies have advanced since then, certain performance characteristics required for true process control have been notably absent. The purpose of this paper ...


    By TOC Systems, Inc.

  • Determination of micro and macro elements in waters with the ELAN DRC-e

    The ability of reaction cell technology to reduce the effects of spectral interferences is well-known, but another, lesser-known capability also exists: extending the dynamic range. This is accomplished by adjusting the bandpass parameters with no gas in the cell. Because the bandpass parameters can be adjusted on a per-mass basis, sensitivity can be reduced on selected isotopes without affecting ...


    By PerkinElmer, Inc.

  • Toxicokinetics of perfluorooctane sulfonate (PFOS) in rainbow trout (Oncorhynchus mykiss)

    Rainbow trout (Oncorhynchus mykiss) confined to respirometer‐metabolism chambers were dosed with perfluorooctane sulfonate (PFOS) by intra‐arterial injection and sampled to obtain concentration time‐course data for plasma, and either urine or expired water. The data were then analyzed using a two‐compartment clearance‐volume model. Renal and branchial clearance rates (CLR and CLB; mL/d/kg) ...


    By John Wiley & Sons, Ltd.

  • Cryotherapy is Cool

    Cryotherapy is a real facet of medical treatment that uses extremely low temperatures to help with pain and inflammation.  Not to be confused with cryopreservation, in cryotherapy the patients are only subjected to the cold for minutes. It seems like something futuristic, but it is actually an increasingly common treatment among athletes to replace ice baths and ice pack ...

  • A cost-effective method for controlling compost air emissions

    In October 2007, ECS began conducting trials at California State University Fresno (CSUF) to explore using the new patent pending AC Composter (ACC) covered aerated static pile system to manage dairy manure solids and comply with airquality standards. A two-zone portable pilot system was delivered by ECS and installed at the CSUF research dairy. This research is being conducted under a Phase I ...


    By Engineered Compost Systems

  • Case study - Printing: Flexographic

    Problem A flexographic converter needed to expand its business by adding an 8-color CI printing press to its existing press lines, and planned to add a second press later. The increase in emissions and flow from the new press was beyond the capacity of the existing 10-year old catalytic oxidizer. The customer needed a way to maintain compliance at an affordable cost. ...

  • Case study - Printing: RTO solution

    Overview A flexographic converter needed to expand its business by adding an 8-color CI printing press to its existing press lines, and planned to add a second press later. The increase in emissions and flow from the new press was beyond the capacity of the existing 10-year old catalytic oxidizer. The customer needed a way to maintain compliance at an affordable cost. ...

  • Case study - RTOs leave nothing to HAP-penstance

    PROBLEM The United States EPA promulgated a ruling in 40 CFR, imposing strict new standards to reduce emissions of toxic air pollutants from the manufacture of pharmaceutical products, including prescription and over-the-counter drugs. The agency's rule was intended to reduce emissions of a number of air toxins and hazardous air pollutants (HAPs), including methylene chloride, ...

  • Case study - Flexographic printer: efficient emissions

    Problem Control of air emissions has become an important issue that flexible packaging converters must consider when changing or upgrading equipment. Robbie Manufacturing of Lenexa, KS, a producer of printed shrink films, bags and pouches for a diverse range of applications, addressed its emissions in 1991 and 1996 by investing in two catalytic oxidizers to control the EPA-regulated air ...

  • Advances in flashpoint testing: economic impact

    Flashpoint testing is one of the oldest methods of the ASTM D02 Committee on Petroleum Products and Lubricants, which was formed in 1904. The most prevalent standards are ASTM D56 (Tag Method), D92 (Cleveland Method), and D93 (Pensky-Martens Method). These classical techniques, commonly referred to as open-cup and closedcup methods, share a common principle: A test flame is lowered into the ...

  • Case study - Chlorinated groundwater treatment

    Problem A Fortune 50 company implemented a remedial project to collect and treat polluted groundwater from a site in Central New York, preventing the mitigation of impacted groundwater from flowing into local waterways. An engineering and construction firm was hired to design and build an effective, efficient groundwater treatment system. Collection of the polluted water would be done ...

  • Case study - Chlorinated groundwater treatment

    Overview A Fortune 50 company implemented a remedial project to collect and treat polluted groundwater from a site in Central New York, preventing the mitigation of impacted groundwater from flowing into local waterways. An engineering and construction firm was hired to design and build an effective, efficient groundwater treatment system. Collection of the polluted water would be ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you