chemical injector system Articles

  • Case study - KLa Slot Injector™ Aeration System For CFAS Process

    Project Name: Touch Panel Manufacturing Plant Wastewater Treatment Location: Tainan Science-Based Industrial Park, Taiwan Type of Bio-Process: CFAS Aeration/Mixing Technology: KLa Slot Injector System Operational Since: July, 2011 The Challenge The plant manufactures ...


    By KLa Systems, Inc.

  • Slot Injector™ Aeration System for Membrane Bioreactor (MBR) Plants

    KLa Systems has recently completed our 23rd MBR aeration system project using our Slot Injector™ aeration technology. These plants are for industrial customers and although predominantly in the food & beverage sector, we have also supplied MBR aeration systems for leachate treatment, chemical and petrochemical processing effluent. Slot Injector™ aeration technology is ideal for ...


    By KLa Systems, Inc.

  • KLa Slot Injector™ Aeration System Expands the Capacity of an SBR at a Landfill Leachate Treatment Facility

    The Challenge A landfill had an existing single basin SBR plant to process the leachate which is notable for its high nitrogen load. The original system was installed with a fine pore diffuser aeration system and due to the chemical/biological composition of the mixed liquor it was prone to diffuser fouling and premature membrane failure Over time this was detrimental to the biological process ...


    By KLa Systems, Inc.

  • Chemical metering pumps solve CP&L’s demineralization problem

    In order to solve a plugging problem in injection system of its coal-fired Lee plan in Goldsboro, NC, Carolina Power & Light Co. replaced the system with two chemical metering pumps. The two chemical metering pumps, made by Hydroflo Corp., have withstood continuous exposure to regenerating chemicals for almost ten years and have required minimal maintenance to the utility. Lee ...

  • Chemical Industry: Wet Scrubbing HCL & SiCl4 Fumes Case Study

    This two-stage scrubbing system utilizes a jet venturi scrubber in conjunction with a counter current packed tower including entrainment mist eliminator. It was designed to eliminate the HCl (hydrochloric acid) fumes generated when SiC14 (silicon tetrachloride) comes in contact with moisture during processing operations at a zirconium processing tank farm, and also the remaining small amount of ...


    By CR Clean Air Group, LLC

  • Ozone systems for beginners

    This paper is intended for people who know a cooling tower when they see one but have little or no knowledge of their care or what part ozone plays. I have tried to make this as simple as possible and there is even a block diagram on the last page to help you out. Ready? Okay, here is what you need to know first: The sole function of ozone use in evaporative cooling towers is to disinfect water. ...


    By Zentox Corporation

  • Chemical Use Reduction, Recycling for Packaging, Waste Reduction and Energy Use Reduction: Robert Bosch Australia

     Background Robert Bosch Australia was established in 1954 in Clayton, Victoria. The main manufacturing plant remains there to this day. The company has some 1,150 employees in Australia. Robert Bosch manufactures and distributes a wide variety of products from electronic consumer goods, to industrial hydraulics, to hot water systems. The focus of activity in Australia is ...


  • Demonstration of the HiPOx Advanced Oxidation Technology for the Treatment of MTBE-Contaminated Groundwater

    The HiPOx technology is an advanced oxidation process that incorporates high-precision delivery of ozone and hydrogen peroxide to chemically destroy organic contaminants with the promise of minimizing bromate formation. A MTBE-contaminated groundwater from the Ventura County Naval Base in Port Hueneme, CA was used to evaluate this technology. Due to extremely high concentrations of bromide in the ...


  • In Situ Solidification/Stabilization

    Introduction Solidification/stabilization (S/S) reduces the mobility of hazardous substances and contaminants in the environment through both physical and chemical means. Unlike other remedial technologies, S/S seeks to trap or immobilize contaminants within their 'host' medium (i.e., the soil, sand, and/or building materials that contain them), instead of removing them through chemical or ...

  • Advanced SNCR - NOx Reduction on Large Utility Boilers

    Fuel Tech has recently completed full-scale demonstrations of Advanced Selective NonCatalytic Reduction systems on a number of large utility boilers (>600MW) firing a variety of fuel types. The systems use the latest flexible injection technology and are controlled with a balanced algorithm utilizing unit load, a full grid of continuous furnace temperatures and the plant continuous emissions ...


    By Fuel Tech, Inc.

  • Fighting Foam in Aeration Tanks

    Just like a poorly poured pint of beer can wreak havoc on your coffee table, excessive foam formation in aeration tanks can create operational challenges for both municipal and industrial treatment plant operators.  In municipal plants, foam formation is common during secondary treatment startup, as the young microbiology is unable to breakdown surfactants associated with soap, shampoo, ...


    By KLa Systems, Inc.

  • Industrial Tainan, Taiwan case study

    Project Name: Touch Panel Manufacturer WWTP Location: Tainan, Taiwan Type of Plant: Industrial - Opto-electronic Consultant: Eco-firm Environmental Technology Co. Ltd. Technology Used: CFAS & DAF & Slot Jet Injectors Biomedia Used: Biowater BWT-35 Operational ...


    By Biowater Technology

  • Biodiesel Analysis with Mid Infrared - From Feedstock to Fuel

    Introduction The biofuels industry is growing rapidly and so is the need for analysis to ensure quality product. The parameters for quality biodiesel require different types of instruments and measurement systems, such as gas chromatographs (GC), titrators, centrifuges, infrared spectrometers... Although claims are out there for the analyzer that will do it all, unfortunately there is no one ...


    By Spectro Scientific

  • Chromatography Tips

    No.1 Gas Chromatography Tips  Our Founders and engineers of the company had accumulated more than 60 years experience in the research and development of HPLC instrumentation; HPLC column technology; mass spectrometer installation, training and services; chemical and biochemical separation, detection and quantification, Proteomics and cancer biomarker research and ...


    By AcuTech Scientific Inc.

  • Ozone Based AOP process for refractory COD reduction in industrial waster water

    Introduction In recent years improvements  in ozone based advanced oxidation technology efficiencies have lowered capital and operating expenses, improving the viability of the use of ozone as the main oxidant. An investigation into alternatives for refractory COD removal which is economically attractive and do not produce sludge lead to an evaluation of ...


    By ESCO International

  • Texas Instruments - A Novel Separation Technique for the Analysis of Trace Levels of Atmospheric Contaminants in Inert Semiconductor Process Gases

    A NOVEL SEPARATION TECHNIQUE FOR THE ANALYSIS OF TRACELEVELS OF ATMOSPHERIC CONTAMINANTS IN INERTSEMICONDUCTOR PROCESS GASES J. Scott McWilliams, Alan Johnson, Charlene Long, Jeremiah D. Hogan*Texas Instruments, Inc.Dallas, TX 75265 Low ppb detection limits for contamination in cylinder gases have been achieved with gas chromatography using a modified gas ...


    By Environics, Inc.

  • Case study - Mazzei degas separator selected for Wichita aquifer storage and recovery project

    GDT Degas Separator Selected As Best Method For Entrained Gas Bubbles Removal Wichita, KS The Problem: In the 1990s, the City of Wichita, Kansas developed a water supply plan that included creating a sustainable water supply through the year 2050. The key component of the plan is recharging the large aquifer that lies under the region with 100 MGD of water from the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you