chemical monitoring technology Articles

  • UV Minimises Risks for Major Food Retailers

    For many years, one of the UK’s largest food manufacturers has made it their business to be the best at producing all manner of bespoke cooked and raw, ready-to-eat vegetables and carbohydrates for their customers, who include chilled food manufacturers, food-to-go operators and, of course, major supermarkets. Being the best means not only complying with food quality standards set by ...


    By atg UV Technology

  • Fuel terminal upgrade installs advanced valve actuation and control - Case Study

    Sector: Oil & Gas Category: Control Networks, Electric Actuators, Fluid Power Actuators, Services Products: CP, Extended Scope, Field Service, IQ3 Range, Pakscan Overview Independent tank storage provider Vopak is increasing and enhancing fuel capacity at the Vopak Terminal Durban in South ...


    By Rotork

  • Using FTIR spectroscopy to measure hydrocarbon pollution in water

    According to the World Health Organization (WHO) and UNICEF’s 2015 Progress on Sanitation and Drinking Water report almost 700 million people around the world don’t have access to clean drinking water [1]. Poor water quality is beginning to return to the developed world too. The strain of population growth, intensified agricultural practices and continued industrial expansion have are ...


    By Specac Limited

  • Hydrocarbon Monitoring Technologies

    The oil spill in the Gulf of Mexico has increased the interest in technology in oil spills, cleanups and remediation. The Gulf of Mexico oil spill is expected to present challenges to every person in the region whose livelihood or operations depend on access to clean water and air.While the obvious presence of crude oil floating on the surface appears to have diminished, the concern that the bulk ...


    By PetroSense, Inc

  • In situ Chemical Oxidation: An Innovative Groundwater Remediation Technology

    A promising new technology, in situ Chemical Oxidation (ISCO), has the potential to supplant the more widely used pump-and-treat groundwater remediation technology by destroying groundwater contamination in situ (in place). ISCO is the process of oxidizing contaminants in the groundwater and soil by injecting water containing high concentrations of an oxidant to the site of the contamination. ...


    By AECOM

  • Monitor Volatile Organic Compounds (VOC’s) with PPM Technology’s IAQ Monitor

    Volatile organic compounds (VOC’s) are emitted as gases from certain solids or liquids. VOCs include a variety of chemicals, some of which may have short- and long-term adverse health effects. Concentrations of many VOCs are consistently higher indoors (up to ten times higher) than outdoors. VOC’s is one of numerous sensor options that can be incorporated into PPM Technology’s ...


    By PPM Technology

  • Shell Chemicals Canada, LTD

    SHELL CHEMICALS CANADA LTD. , part of one of the largest petrochemical operations in the world, installed the CATSCAN® performance monitoring solution from Pavilion Technologies and CRI Catalyst Company to analyze day-to-day catalyst performance, enhance support, perform 'what-if' scenarios, and manage catalyst decline ...


    By Rockwell Automation, Inc.

  • Enhanced LDAR in the chemical industry

    As a result of recent leak detection and repair (LDAR) audits and the associated issues (as described in the Winter 2009 issue of Environmental Quarterly), EPA is initiating enhanced LDAR programs as part of the most recent consent decrees.1 The enhanced LDAR programs for chemical facilities are more stringent than the enhanced LDAR previously required for the petroleum refining industry. ...


    By Trinity Consultants

  • Intrinsic Biodegradation Kinetics Of Chemicals

    Intrinsic Biodegradation Kinetics Of Chemicals An understanding of the rate of biodegradation kinetics for specific industrial chemicals is useful when evaluating their treatability or their impact on treatment processes. The objective of kinetic assessments usually is to model the biodegradation reactions for specific chemicals using either pure cultures or defined ...


    By Challenge Technology

  • Improved Wastewater Treatment & Paper Mill Performance With New COD Monitoring Technology

    The Nordic Wood Biorefinery Conference was held in Stockholm, Sweden during March 28-30, 2017. An abstract presentation authored by partners from VTT, Kemira, FPInnovations and MANTECH was presented during the conference. The PeCOD® Analyzer has the ability to enable pulp and paper mills to improve effluent treatment process and to optimize chemical programs, leading to proper ...


    By MANTECH

  • An adaptive, comprehensive monitoring strategy for chemicals of emerging concern (CECs) in California's aquatic ecosystems

    A scientific advisory panel was convened by the State of California to recommend monitoring for chemicals of emerging concern (CECs) in aquatic systems that receive discharge of municipal wastewater treatment plant (WWTP) effluent and storm water runoff. The panel developed a risk‐based, screening framework that considered environmental sources and fate of CECs observed in receiving waters ...


    By John Wiley & Sons, Ltd.

  • 10 Reasons why you should continuously monitor low temperature and liquid chemical sterilants for worker safety

    1. Sterilant chemicals are highly toxic Low temperature and liquid chemical sterilants are designed to kill all microorganisms including resistant spores and if they were not toxic, they would not be effective in sufficiently high concentration to destroy all microbial life including the chemically resistant sporicidal forms of certain ...


    By ChemDAQ, Inc.

  • Case study - Batch chemical manufacturing

    Location: New Jersey Equipment: Refurbished, warranted Regenerative thermal oxidizer RTO; (10,000 scfm) (1994 vintage) Installed: 2002 Problem: Batch chemical manufacturer required emission controls as part of a process expansion in their New Jersey facility. Project Details: ...


    By Kono Kogs, Inc.

  • Enhancing in-situ chemical oxidation performance

    In this edition of Peroxygen Talk, guest authors Matt Burns and Bob Pirkle discuss the benefits of compound specific isotope analysis (CSIA) to optimize delivery and monitor performance of ISCO applications. Mr. Burns is a Senior Project Director at WSP Environment & Energy, a leading environmental, energy and sustainability consultancy with over 1,000 people in 65 global locations. He has more ...

  • Asbestos monitoring – what monitor should I be using?

    Asbestos is the name given to a group of minerals that occur naturally as masses of strong, flexible fibres that can be separated into thin threads and woven. These fibres are not affected by heat and do not conduct electricity. Asbestos is chemically, relatively stable. For these reasons, asbestos has been widely used in many industries.  These four types are classified as follows:  ...


    By Shawcity Limited

  • Chemically Inclined: The Case for Clean Boilers

    Boiler cleaning is something most companies don’t want to think about — if boilers are working within operational limits it’s often easier to keep up with smaller preventative maintenance (PM) tasks but put off a total chemical clean ...

  • Biofuels Gas Monitoring

    The Customer The Company is one of the world’s leading developers and producers of advanced fuels and green chemicals. The Process The Company uses a gasification process that breaks down wood chips, waste and other feedstock using plasma technology. The process produces a uniform synthetic gas (syngas) that is used to power their turbine engines. ...

  • Sewer Level Monitoring - Photos

    Sewer Level Monitoring - Photos Photos in this article present the complexity and versatility of sewer level monitoring. When examining the photos, pay special attention to the stand-alone autonomous characteristics of each installation. In lack of any cabling from the outside, whether data cables or power cables, the solution is fed from its own battery power supply. Data is tranmitted ...

  • ITRC technology overview of passive sampling technologies

    This document presents technical overviews of 12 passive sampling technologies. It describes each technology’s basis of operation, intended applications, advantages, limitations, and development status. Contacts for additional information are provided. This overview is an outgrowth of interest and information generated in preparation of the ITRC Technical and Regulatory Guidance for Using ...


    By EON Products Inc.

  • BioSense a Biofilm Monitor and Controller

    Abstract Biofilms (slime) can form on virtually every nonshedding surface, in a nonsterile aqueous environment i.e. anywhere where a water source is present; such as cooling/heating systems, swimming areas and in drinking water purification. These Biofilms can cause a myriad of problems including; harbouring harmful bacteria such as Legionella, inducing corrosion, and reducing ...


    By Sensara, SL

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you