chemical protection equipment Articles

  • Personal protective equipment against nanoparticles

    Nanomaterials manufacture and use are in full expansion. With them comes an increasing risk for human health, especially at the workplace. Indeed, the early signs of potential toxicity associated with nanotechnologies are piling up. Even if they must be considered as a last resource in a traditional occupational Health & Safety approach, personal protective equipment (PPE) against nanoparticles ...


    By Inderscience Publishers

  • Inspection Manual: Federal Equipment Leak Regulations for the Chemical Manufacturing Industry

    Untitled Document Abstract The purpose of this manual is to enhance an inspector's ability to conduct more complete and effective inspections at facilities in the chemical ...

  • Effective Equipment Grounding

    The quality of the electrical wiring and grounding in a facility containing sensitive electronic equipment is one of the most important and least understood aspects of electrical power systems. Properly designed and maintained wiring and grounding systems are necessary to ensure personnel safety and protection of data and telecommunications equipment. Effective grounding creates an electrical ...


    By EPG Companies Inc.

  • Protect Your Respiratory System

    The air around you keeps you alive. But in certain circumstances, it can cause you serious injury, illness or death. To stay alive and healthy, you need air which is clean, free of toxic gases and other contaminants, and contains the right amount of oxygen. Most of the time, the air around you at home, on the street and at work fills the bill. But under certain circumstances, the air contains ...


    By SafetySmart

  • New Chemical hazards in the workplace

    In the days when Industrial Hygiene became a recognized scientific discipline, smoke stacks belched black smoke in River Rouge, MI and Pittsburgh, PA. Men worked in clouds of coal and asbestos dust and labor was hard, physical and usually dangerous. Personal protective equipment was rare; its use, even rarer and its protective effect marginal. Today, the face of manufacturing has changed ...


    By Atlantic Environmental, Inc.

  • Counting the costs of chemical incidents

    The consequences of a lack of control when using chemical substances in the workplace are well known and apparent.  Any health and safety expert can tell you of at least one major accident whereby poor chemical management policies and procedures have lead to disaster.  Examples include Bhopal, Grangemouth, Flixborough, Seveso and more recently, Buncefield.  Major accidents like ...

  • Phosphorus control protects surface waters

    Phosphorus is the decisive factor for excessive algae and plant growth in water bodies, that’s why quality standards require reductions in the amount of phosphorus released from wastewater treatment plants into rivers and lakes. In recent years, the outlet limit values have not only been reduced on national levels. Depending on the vulnerability of ecosystems, especially low target values ...


    By Endress Hauser AG

  • How Tire Shredding Protects Wildlife

    One of the most revolutionary inventions in the history of mankind was the wheel, and the best upgrade to that invention was the rubber tire, which overcame the limitations of wooden or metal wheels and made it possible to have smooth rides at fast speeds. However, there is a significant drawback to using rubber tires: eventually, they get too worn out to be useful as tires anymore and have to ...


    By ECO Green Equipment

  • Chemical Spill Response Products & Procedures

    The current political and world climate has forced the Emergency Response Community to take a closer look at the number of potential hazards that they may be called upon to deal with. Of particular concerns are the response to terrorist and/or chemical incidents. Depending on the type of event, responders may be faced with a myriad of challenges and onsite dangers. With a chemical release, the ...


    By Fast-ACT

  • How to Handle Chemical Spills in Laboratories

    Chemical Spill Response Products & Procedures The current political and world climate has forced the Emergency Response Community to take a closer look at the number of potential hazards that they may be called upon to deal with. Of particular concerns are the response to terrorist and/or chemical incidents. Depending on the type of event, responders may be faced with a myriad of ...


    By Fast-ACT

  • An overview of exergy analysis for chemical process industries

    Among all the industrial sectors, the chemical industry is one of the energy intensive industry with 33% share in industrial energy use. Increasing cost of raw materials, infrastructure cost and energy cost increases burden on the profit margin of the chemical sector. Chemical industries are looking for improved process design and efficient equipments where energy consumption can be reduced. In ...


    By Inderscience Publishers

  • A Citizen`s Guide to Chemical Dehalogenation

    What is chemical dehalogenation? Chemical dehalogenation is a chemical process to remove halogens (usually chlorine) from a chemical contaminant, rendering it less hazardous. Halogens are a class of chemical elements that include chlorine, bromine, iodine, and fluorine. Polychlorinated biphenyls are halogenated compounds that once were used in high voltage electrical transformers because they ...

  • New Speed Reducer for Industrial is protect the environment

    1.Introduction(1) The reduction gear industry belongs to the basic industry of national economic development. It needs to be used in almost all mechanical transmission systems, from household appliances to automobile and airplane, from production tools to construction machinery. The extensive demand has driven the development of the reduction gear market and enriched the manufacture variety of ...


    By Sogears

  • Hazardous Location LEDs in Chemical Manufacturing Facilities

    Employees inside chemical manufacturing plants are exposed to some of the most unforgiving work conditions in the industrial sector. This is because in such environments, workers are exposed to extreme temperatures, dust, volatile chemicals and invisible, explosive gases. Common protection methods against explosive risks include containment, segregation and prevention. Out of all the ...


    By Larson Electronics LLC

  • Bioconservacion at the CEPSA Chemical Plant - Case Study

    CEPSA continues to trust in Bioconservacion solutions for the prevention of corrosion in electrical control rooms. In CEPSA's different refineries we have already installed equipment to regulate corrosion and pressurisation in electrical rooms. We recently published an article on this subject on our blog; to read the article ...


    By Bioconservacion SA

  • Ultimate Linings Best| Industrial Coatings| Protective Coatings

    Industrial coatings are generally used to diminish the effects of corrosion thus preventing the metal from being tarnished or damaged. Industrial protective coating enhances the finesse of the metal or material which in turn improves the quality. The ...


    By Ultimate Linings

  • Heat Protection Gloves: Which Professions Use Them?

    In a wide variety of industries, companies are required to provide the proper safety equipment for their employees. Health and safety has become a top priority for businesses in recent years, providing protection for both workers and the companies who employ them. Among other things, gloves have become a common protective item in the workplace. Particularly for workers who are dealing with high ...


    By Intersafety

  • Chemical Air Pollution in the Clinical Research Environment

    There has been a revolution in awareness of chemical air pollution in research laboratories. I could tell you several 'horror stories' of casual exposure to mercury vapour, benzene and chromic acid (the ultimate glassware cleaning agent) among innocent biomedical PhD students (including myself) in the 1970s. But researchers in hospitals, and other laboratories can never afford to be complacent ...


    By Commercial Air Filtration

  • High quality bathing water protects human health

    The sewage treatment plant of Biarritz, France faced severe issues with inflowing water during heavy rain fall, resulting in untreated wastewater being diverted directly into the sea, alongside public beaches. A fast and reliable disinfection of the flow was needed. Kemira installed DesinFix disinfection technology which is designed for water reuse, and to handle such problematic flows ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you