chemical storage plastic tank Articles

  • Bridge Height Limits Transport of Cl02 Storage Tanks

    Located in Northern Ontario on the Trans Canada Highway is a bridge that enables pedestrians and vehicles to cross the Spanish River. The bridge itself holds no place in the annals of Canadian history. It is in fact, quite unremarkable as a typical bridge found in the area. However, the Spanish River Bridge represented a major problem for an engineering project rquired by a local Bleach Pulp ...


    By Fabricated Plastics Limited

  • About Chemical Process Plants and Usage of Tanks

    In today’s scenario industrial development has reached new heights with many large scale factories and plants being set up to form numerous products for the benefit of mankind. One such plant which has seen vast growth in the last few years is Chemical Process Plant. As the name describes, such plants have been set ...


    By Greenplant Stainless Ltd

  • Tuffa tanks keep ryanair flying high

    Tuffa UK Limited has completed the order to supply RyanAir with four fifteen thousand litre tanks to store aircraft de-icer, which will help their fleet flying out of Stanstead Airport through the winter's freezing conditions. The custom made bunded tanks, made from MDPE, are the perfect storage vessels for chemicals such as the industry-standard Killfrost de-icing fluids. Tuffa UK Limited are ...


    By Tuffa UK Limited

  • "A Non-Chemical Water Treatment for Cooling Towers"

    Untitled Document Introduction This paper will describe a case study of a ...


    By Dolphin WaterCare

  • Evaporator Limits Boron to 5 PPM at award-winning chemical plant

    Problem: The biggest challenge confronting Rohm & Haas Corp. in building a wastewater plant for its chemical facility in Elma, Wash., was meeting Washington State Dept. of Ecology limitations on boron of 5 ppm. The Elma plant manufactures sodium borohydride, a versatile chemical used in a variety of applications ranging from the generation of sodium hydrosulfite for reductive bleaching of ...


    By Oil Skimmers, Inc.

  • Chemical Industry: Sale of by-Product HCl Covers Cost of Emission Control System Problem Case Study

    Some of the specialty chemical processes at a major chemical manufacturer’s plant result in considerable HCl loading in the off-gas. The HCl must be removed before the off-gas can be discharged to the atmosphere. Production of saleable by-product HCl solution was an important goal when looking for a high-efficiency HCl removal system. The company wanted to achieve a very low level of ...


    By CR Clean Air Group, LLC

  • Chemical Industry: HCL System Exceeds Current Regulations Emission control meets requirements while recovering by-product for sale Case Study

    Chemron manufactures high-quality specialty chemicals and surfactants for personal care products, industrial, institutional, oil field, mining, coatings, lubricants and water treatment. Some of the operations result in the creation of hydrochloric acid with high variable rates. As expressed by Bill Frost, of Chemron: “Chemron maintains a strong environmental commitment, which views ...


    By CR Clean Air Group, LLC

  • 12,000 U.S. schools are within a mile of a hazardous chemical facility. What should we do about that?

    In the absence of a federal U.S. policy for schools located near potentially dangerous sites, community activists search for safer solutions. On April 17, 2013, an explosion and fire at the West Fertilizer Company plant in West, Texas, killed 15 people and injured hundreds. It also destroyed more than 150 buildings around the plant. Among these were the West Intermediate School for 4th and ...


    By Ensia

  • Case History - Sale of By-product HCl Covers Cost of Emission-Control System

    Problem: Some of the specialty chemical processes at a major chemical manufacturer's plant result in considerable HCl loading in the off-gas. The HCl must be removed before the off-gas can be discharged to the atmosphere. Production of saleable by-product HCl solution was an important goal when looking for a high-efficiency HCl removal system. The company wanted to achieve a very low ...


  • Sale of by-Product HCl Covers Cost of Emission Control System

    Problem: Some of the specialty chemical processes at a major chemical manufacturer's plant result in considerable HCl loading in the off-gas. The HCl must be removed before the off-gas can be discharged to the atmosphere. Production of saleable by-product HCl solution was an important goal when looking for a high-efficiency HCl removal system. The company wanted to achieve a very low ...


  • Award Winning Large Diameter FRP Stacks For Magnesium Extraction Plant

    When Fabricated Plastics Limited of Maple (Toronto), Ontario, Canada was awarded a contract by a world renowned Mining/Metallurgical Company, it proved to be a chance to exhibit their engineering excellence in several ways. First they had to demonstrate that their proposed use of Fibreglass Reinforced Plastic (FRP) was clearly the material of choice in competition with other materials. Then they ...


    By Fabricated Plastics Limited

  • Material Matters - An Engineering and Fabrication Challenge

    The world of engineering is a very large and diverse universe which ranges from electrial, mechanical and civil to environmentaland structural. It is true that their varied disciplines have many qualities in common, e.g. the mixture of logic, creativity, awareness of cost /benefit ratio etc., are requirements of all engineering. It is equally true that each discipline has its own mind set, ...


    By Fabricated Plastics Limited

  • Reduction of Waste from Synthetic Rubber Testing and Unreacted Styrene: Kemcor Australia

     Kemcor Australia has used cleaner production processes to reduce waste from synthetic rubber testing and unreacted styrene in small batch production, with significant cost savings. Background Kemcor Australia is a leader in the production of olefins, poly-olefins and synthetic rubber, and is part of the Altona (Victoria) chemical complex, the largest centre for primary ...


  • Replacement of Hot Caustic Paint Stripping Process with High Pressure Water Jet System: Ford Australia

    Ford Australia Ltd replaced an existing hot caustic paint stripping process, used for cleaning car skids, with a high pressure water jet system. This project has resulted in annual savings in the order of $300,000 from reduced chemical, energy and waste disposal costs. Significant improvements in paint quality were also achieved through the ability to clean the skids on a more regular basis than ...


  • Petrochemicals Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Is Waste Going to be Our Apocalypse Without a Noah’s Ark to Save Us?

    Human beings have been dumping waste in water, including the ocean, since before the Agricultural Age. The Industrial Age brought with it new materials to dump, chemical wastes and by-products. Some materials are dumped into rivers and find their way to the ocean by running downstream. Other materials are dumped directly into the ocean from boats. Plastic is a harmful pollutant that does not ...


    By ABCOV Companies

  • Thermal Treatment Technologies

    Hot gas decontamination: Hot gas decontamination is a technology still in the pilot-scale of development that can be used for decontamination of explosives-contaminated masonry or metallic structures. The method involves sealing and insulating the structures, heating with hot gas stream to 260 °C (500 °F) for a prescribed period of time, volatilizing the explosive contaminants, and destroying ...

  • Introduction to Decentralized Packaged Wastewater Treatment (PWWT) Systems - PDH Article

    Learning Objectives After reading this article, you should understand: Functions and processes of a decentralized PWWT system; Design considerations of a PWWT system. Overview "Clean water will be the oil of the 21st Century." The accuracy and magnitude of this statement is resonating worldwide. ...

  • Landfill Leachate Treatment by Forced Circulation Vacuum Evaporation - Athens (Ano Liossia Landfill)

    This report describes how treatment of landfill leachate by means of forced circulation vacuum evaporation provided: an environmental benefit from use of biogas as power supply a big saving in disposal cost due to waste volume reduction a return on investment of less than two years Introduction Solid Waste Management in Greece has been remarkably upgraded during the last ...

  • Why instrument hire makes occupational safety sense

    Background Decisions concerning the acquisition of occupational safety monitoring instrumentation are often made by operational staff that may not have visibility of the full financial implications of their choices. The following article will examine the factors affecting these decisions and explain why a strategic decision to hire instrumentation can deliver substantial and wide-ranging ...


    By Ashtead Technology Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you