chemical waste treatment Articles
-
Waste Water Treatment- Case Study
These Projects handle the installment of Systems that take care of the treatment and recycling of Domestic Wastewater. Building of 5 CMD Wastewater Treatment Facilities, being a combination of chemical & Biological Waste Treatment ...
-
Pharmaceutical and chemical waste gas treatment
Some problems existing in the waste gas treatment of the pharmaceutical and chemical industry and the specific method to solve the waste gas treatment problem in the industry, of course, the industry is mainly the waste gas treatment problem of solvents: Problems existing in the treatment of solvent waste gas in pharmaceutical and chemical waste gas treatment After the control and treatment of ...
-
Treatment of industrial wastewater
All industries produce some type of waste product, either from production, maintanance or both. These hazardous and non-hazardous wastes need to be properly stored, treated and discharged to a sewer system or otherwise disposed of. Wastewater treatment is a multi-stage process to renew wastewater before it is discharged to the municipal sewer system. The goal is tio reduce or remove organic ...
-
Treatment of actual metalworking wastewaters by coagulation combined with electrochemical oxidation
The technical and economical viability of physico-chemical treatment followed by electrochemical oxidation of two actual wastes produced in a metalworking industry has been studied. The physico-chemical process was found to be able to achieve the breakdown of the emulsions in the treatment of both effluents, although it requires a complementary treatment to deal with the soluble organic matter. ...
-
What is the best solution for the treatment of e-waste?
E-waste mainly refers to scrap PCB board. Because PCB board consists of 40% metals and 60% non-metals, and we can get high profit from the metals, so we shouldn't throw away the e-waste directly. Then, how should we process the e-waste? What is the best solution the deal with e-waste? Let's discuss it together. There are 3 solutions to deal with e-waste: chemical treatment, fire treatment and ...
-
TVOC installed for Confined Space Entry at Process Analyser Houses
Product: TVOC Application: Detection of Vinyl Chloride (VCM) at Analyser Houses Customer: Solvay, Belgium Introduction Solvay have a number of Analyser Houses with on line GC monitors analysing process streams. TVOC provides ongoing, continuous monitoring of air quality inside the Analyser House detecting possible leaks from the GC monitors or surrounding pipe work. The 4-20mA output triggers an ...
-
Physico-chemical treatment of liquid waste on an industrial plant for electrocoagulation
Wastewater from washing, oil separators, the metal processing and detergent industries, was tested and treated for treatment of different types of liquid waste at industrial level at Domžale-Kamnik Wastewater Treatment Plant (WWTP). The effect of implementing the electrocoagulation (EC) and flotation processes, respectively, is analysed and includes the duration of the EC implementation, ...
-
Acid dyes adsorption onto activated carbon from waste tyres
Activated carbon has been produced from waste tyres using chemical treatment. The effects of activation chemical used, chemical ratio, soaking time in the impregnation step, activation temperature and time duration of the activation step were investigated. Surface area, pore size distribution, total pore volume, adsorption capacities of acid dyes (AY117 & AB25) were determined. The carbon product ...
-
TVOCmonitors soil vapour extraction (SVE) process emissions
Product: TVOC Application: Soil Vapour Extraction (SVE) Customer: Geo Environmental Management Introduction Following an initial clean-up of gas oil spillage, TVOC was used to effectively monitor Soil Vapour Extractions (SVE) process emissions during the remediation of a residual vapour phase plume by Geo Environmental Management. Soil Vapour Extraction (SVE), also known as soil venting or ...
-
Case Study – Food/Beverage Industry / TSS/BOD/FOG reduction
Challenge A fish meat processing plant wanted to reduce their effluent discharge costs and eliminate chemical cost in primary waste water treatment. Solution Genesis Water Technologies with its local partner provided engineering, and design of a electrocoagulation solution with prescreen and post solids separation that eliminated chemical usage in the primary clarification process. The raw ...
-
Textile Wastewater Treatment - An Application to Sustainably Reuse Water in the Textile Industry - Case Study
The textile industry is a water consumption intensive industry. Water is utilized for cleaning the raw material, and for the different steps in the textile dyeing process. Due to the effects of water scarcity and stricter environmental regulations, the cost of fresh water utilization has increased worldwide. In addition, the textile industry is faced with pressure by government regulators to ...
-
On the removal of silver and antimony radionuclides from radioactive liquid waste by some classical means
After partial upgrading of a research reactor at the Pakistan Institute of Nuclear Science and Technology, Islamabad, some waste effluents having 110mAg and 124Sb with higher activity levels than the disposal limits piled up because the waste storage capacity was not yet enhanced. Experimental work was conducted to arrive at some optimum procedure for the treatment of the waste to ensure smooth ...
-
Electrocoagulation Wastewater Treatment – An Application To Sustainably Reuse Textile Wastewater
The textile industry is a water consumption intensive industry. Water is utilized for cleaning the raw material, and for the different steps in the textile dyeing process. Due to the effects of water scarcity and stricter environmental regulations, the cost of fresh water utilization has increased worldwide. In addition, the textile industry is faced with pressure by government regulators to ...
-
BREF WGC compliance: waste gas treatment in the chemical industry - Case Study
Regulatory Reminder According to the latest WGC BREF published on December 6th, 2022, establishing the best available techniques (BAT) for common waste gas management and treatment systems in the chemical sector, under Directive 2010/75/EU, sites will have to comply with its conclusions by December 22nd, 2026 at the latest. Conclusions on BAT: Download BAT reference document: ...
By ENVEA
-
Sustainable wastewater treatment chemicals in a dairy
Problem/Definition Atana Ltd has been tasked in reducing sludge generation produced at the sites effluent plant by introducing a new chemical regime. This would bring considerable savings on their daily running costs; reduce the need for hazardous substances and prevent any corrosive issues through the removal of inorganic chemicals. The plant also has consent issues with FOG and Suspended ...
-
Breweries - Case Study
Problem with high wastewater charges because of high COD and suspended solids readings, which were dramatically reduced using BioAmp. Thwaites Brewery Daniel Thwaites is a large independent Brewery based in Blackburn, UK. The Brewery is located in the centre of the city and neighbours commercial, industrial and residential areas. The Brewery operation includes brewing and conditioning of Ales ...
-
2005 Benchmark Survey of Corporate Sustainability Reporting in Canada
Gravimetric and chemical treatment with land-farm application discharge had significant design shortcomings during routine process upsets, becoming under-sized as production increased, or as heavy rainfall resulted in uncontrolled storm runoff of the wastewater. API O/W/S technology certainly can’t be expected to be deployed effectively for remote oil and gas fields or offshore sites produced ...
By Stratos Inc.
-
Fluid control saves $1 million at automotive supplier
The Problem: A Michigan wheel manufacturer was facing numerous problems associated with the quality and maintenance of their coolant and cleaners. These problems included downtime quality control rejections due to corrosion of parts, pumps clogging with biological matter, and operator complaints of coolant odors. Concurrently, the plant needed to reduce fluid-related costs and improve data ...
-
How Level Sensors Are Used in Various Industries
From ensuring the smooth flow of production lines to safeguarding the environment, level sensors play a critical role in various industries. Their ability to accurately and reliably measure the level of liquids, solids, and slurries in tanks, silos, and other containers contributes to efficiency, safety, and quality control across diverse sectors. Let's explore how level sensors are utilized in ...
-
Ultimate Linings Best| Industrial Coatings| Protective Coatings
Industrial coatings are generally used to diminish the effects of corrosion thus preventing the metal from being tarnished or damaged. Industrial protective coating enhances the finesse of the metal or material which in turn improves the quality. The important feature of these coatings is that they are weather proof and hence they provide robustness to the products used in the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you