chemiluminescence method Articles

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • Field Method Comparison between Passive Air Samplers and Continuous Monitors for VOCs and NO2 in El Paso, Texas

    This study evaluates the performance of Model 3300 Ogawa Passive Nitrogen Dioxide (NO2) Samplers and 3M 3520 Organic Vapor Monitors (OVMs) by comparing integrated passive sampling concentrations to averaged hourly NO2 and volatile organic compound (VOC) measurements at two sites in El Paso, TX. Sampling periods were three time intervals (3-day weekend, 4-day weekday, and 7-day weekly) for three ...


    By Ogawa & Company, USA, Inc.

  • Automated techniques for real-time shipboard determination of dissolved trace metals in marine surface waters

    This review compares methods that are currently employed for shipboard analysis of trace metals in seawater voltammetric, chemiluminescence and colorimetric methods. Instrumentation and methods are described for collecting surface seawater using pumping, with subsequent on-line analysis by stripping voltammetry. The review is illustrated with data for oceanic and coastal distributions of ...


    By Inderscience Publishers

  • Investigation on the spontaneous combustion of refuse-derived fuels

    Refuse-derived fuel (RDF), a high-caloric material, is used by various combustion processes, such as power plants, as alternative fuel. Several explosion accidents, however, possibly initiated by the spontaneous combustion of stored RDF, have been reported in Japan. Therefore the spontaneous combustion of RDF prepared from domestic garbage was investigated using chemiluminescence. RDF samples ...


    By SAGE Publications

  • Why measuring the ambient NO2 without conversion?

    Nitrogen oxides NOx are pollutants that may have particular impact in terms of greenhouse gases, acidifying air etc ... issuance increased significantly since 1950 with the massive development of transport and industries. It therefore becomes necessary to provide measures always safer these pollutant gases, and to know the reliability of results. Currently, 60% of emissions of NO and NO2 are ...


    By Environnement S.A

  • Flexibility beyond any limits - multi N/C

    With a multi N/C analyzer the parameters TOC, NPOC, POC, TC, TIC and TNb  can be measured quickly, easily and without any conversion. This is possible thanks to the perfect combination of an efficient sample digestion technology, VITAFlow Management System and Focus Radiation NDIR detector. TOC and TNb  are measured truly simultaneously, with a single injection and without any exchange ...


    By Analytik Jena AG

  • Analytik Jena AG: Flexibility beyond any limits - multi N/C

    With a multi N/C analyzer the parameters TOC, NPOC, POC, TC, TIC and TNb can be measured quickly, easily and without any conversion. This is possible thanks to the perfect combination of an efficient sample digestion technology, VITAFlow Management System and Focus Radiation NDIR detector. TOC and TNb are measured truly simultaneously, with a single injection and without any exchange of catalyst ...


    By Analytik Jena AG

  • Popular analysers are portable and rentable

    The MCERTS approved HORIBA PG-250 has been one of the most popular  instruments in Ashtead Technology’s fleet of rental equipment for a number of  years. Jay Neermul, the company’s Environmental Product Manager says “This  is because it is able to analyse CO, NO/NOx, SO2 and CO2 using standard  reference methods in a portable instrument that can be easily and ...


    By Ashtead Technology Ltd

  • Special price offered for the new NO2 CAPS AS32M analyzer

    New: the AS32M analyzer – approved by the US EPA – gets the TÜV certification for the measurement of NO2. Providing accurate and very precise ...


    By Environnement S.A

  • Air Monitoring for the Gulf Oil Spill

    Ambient air monitoring is a priority in the ongoing efforts to contain and manage the oil spill from the Deepwater Horizon in the Gulf of Mexico. The following provides information about the kinds of airborne contaminants that are currently being monitored in the Gulf, how they are collected and how they are analyzed. For a given project, a suitable sampling plan – developed by ...


  • Infectious Disease Testing Industry : Strategic Assessments for Technologies & Applications of Leading Suppliers Analyzed in Report

    ReportsnReports.com adds report Infectious Disease Testing Market 2014: Strategic Assessments of Leading Suppliers to its store.This report provides detailed analyses of current and emerging technologies, and their potential applications for the infectious disease testing market, including molecular diagnostics, biochips, monoclonal antibodies, immunoassays, IT, gel microdroplets, ...

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you