chipping Articles

  • IBM's Graphene Computer Chip

    IBM recently showcased a brand new graphene computer chip, outperforming previous graphene-based chips by a factor of 10000. Apart from a tremendous speed up, it is also remarkable for the process used in its production. It is a standard CMOS production process, widely adopted in the currently dominant silicon chip manufacturing. Mapping the outstanding technological potential of graphene ...


  • Megawatt out of chips

    König + Neurath AG, one of the leading European office furniture manufacturers, in Karben near Frankfurt/Main besides other materials process derived timber products such as chipboards and multiplex boards to produce office furniture for nearly any furnishing purpose. The resulting wood residues are not discharged but processed to become combustible by means of which the complete heating and ...


  • The One-Chip TV way

    In this paper, the following fundamental question is discussed: "How to create enough vitality in a team to react adequately to a market (r)evolution and be successful along the product creation process way until market dominance is reached?" Cultural and educational aspects are dealt with as key elements influencing the success. Through a self-analysis, it is illustrated how a ...


    By Inderscience Publishers

  • CHIP-tuning for biological wastewater treatment plants

    The demand for efficiency improvement in municipal and industrial wastewater treatment plants (WWTP’s) is increasingly based on problems related to the water quality, process stability and/or insufficient performance in the COD removal and/or nitrification process. New, stricter requirements or the need for higher removal efficiency intensify the demand for optimizing the existing ...


    By Multi Umwelttechnologie AG

  • Turning wood chips and sawdust into a valuable solid fuel

    RUF briquetting units are the economical solution for the processing of wood chips and sawdust. Where timber is planed, turned and sanded, manufacturers end up with large quantities of wood chips and sawdust. By briquetting this material, you can recover a valuable solid fuel. Where large quantities are produced, the single briquette pressing system developed by RUF GmbH is the most economical ...

  • Carbon management on the rise as a priority for blue-chips

    Carbon management on the rise as a priority for blue-chips Latest report from the Carbon Disclosure Project reveals firms are committed to deliver carbon reduction targets despite political uncertainty. The Carbon Disclosure Project’s annual survey of the world’s 500 largest firms shows that carbon management is steadily climbing the corporate agenda with 85% of respondents now having ...


    By Vital Efficienci Ltd.

  • Engineering Properties of Tire Chips and Soil Mixtures

    The primary objective of the research described herein is to assess the pertinent engineering properties for reusing shredded scrap tires as a construction material for light-weight fill material in highway construction, for drainage material in highway and landfill construction, and for other similar applications. Reuse of scrap tires would not only provide a means of disposing of them but would ...


    By ASTM International

  • Denitrification in wood chip bioreactors at different water flows

    Subsurface drainage in agricultural watersheds exports a large quantity of nitrate-nitrogen (NO3–N) and concentrations frequently exceed 10 mg L–1. A laboratory column study was conducted to investigate the ability of a wood chip bioreactor to promote denitrification under mean water flow rates of 2.9, 6.6, 8.7 and 13.6 cm d–1 which are representative of flows entering subsurface drainage tiles. ...

  • A pannell of chipping experts perseverance, service and dependability are hallmarks for Oklahoma-based Pannell Chipping, Inc.

    While logging and landclearing professionals as a whole have often been broadly - and inaccurately - portrayed as anti-conservators of the land, one segment of that profession, chipping companies, have suffered disproportionately. Presented as insensitive to the benefits of good forestry, they have had to literally fight to prove that they are indeed good stewards of the land, providing a ...


  • Imaging and analysis of chip formation during orthogonal cutting of titanium alloy

    Orthogonal cutting of titanium alloy Ti-6Al-4V was investigated in a series of continuous and interrupted turning tests. Direct observation of the chip formation zone was achieved using a high speed imaging system with a long-distance microscope lens. Frame rates from 20,000 to 50,000 frames per second were used to record the chip formation cycle over a range cutting speeds from 4 to 150 m/min ...


    By Inderscience Publishers

  • Michigan logger builds new chip fleet with Titan Trailers

    With successful operations already running in excavation and logging, Jim Carey was in no hurry to add new chip trailers to the fleet for his growing biomass business. He took his time to decide where he could expect to get the best return on his latest investments. “When we got into the chipping business four years ago, we bought reconditioned multi-axle trailers to get started. We had ...


    By Waste Advantage Magazine

  • SNPs and Chips: Genomic Data in Safety Evaluation and Risk Assessment

    The biotechnology revolution is impacting all of the biological sciences, and toxicology is no exception. Perusal of the abstracts of the Society’s recent annual meetings confirms that our field is already actively using the powerful new tools of molecular biology to ...


    By Oxford University Press

  • Validation of a fully autonomous phosphate analyser based on a microfluidic lab-on-a-chip

    This work describes the design of a phosphate analyser that utilises a microfluidic lab-on-a-chip. The analyser contains all the required chemical storage, pumping and electronic components to carry out a complete phosphate assay. The system is self-calibrating and self-cleaning, thus capable of long-term operation. This was proven by a bench top calibration of the analyser using standard ...


    By IWA Publishing

  • Machine shop for oil and gas services provider wins when the chips are down

    Chip Filtering Keeps Machine Shop Coolant Clean Since 1976, Facility Engineer Jay Wilson has handled the HVAC, electrical, and other operational facility needs for a key Texas-based plant within the FMC Technologies, Inc. (FMCTI) family. This leading global provider of technology solutions for the energy industry and other industrial markets was twice named as the Most Admired Oil and Gas ...


    By Abanaki Corporation

  • Development of polymer lab-on-a-chip (LOC) for oxidation-reduction potential (ORP) measurement

    Reverse osmosis (RO) desalination has been recognized as a promising method to solve the water shortage problem. Nevertheless, since it is energy intensive and has many problems associated with biofouling/fouling of RO membranes in RO plants, its commercial acceptance is still slow. Especially, as high levels of oxidizing agents negatively affect RO membrane efficiency and life span. So, there is ...


    By IWA Publishing

  • Concentrations of organic wood preservatives in wood chips produced from wood wastes

    We investigated the concentrations of wood preservatives in the wood chips produced in wood-waste processing facilities in 1988, 1998–1999, and 2001–2002. Among the wood preservatives used in the past in Japan, halophenols, including PCP, chlordane, and chlorpyrifos, had comparatively high detection rates and high average concentrations in the wood chips produced in 2001–2002. Aldrin and endrin ...


    By Springer

  • C&A tool increases profitability, maintains clean facility with chip processing system

    Challenge A machining supplier needs an automated chip and fluid processing system to process metal turning and chips, while simultaneously capturing expensive cutting fluids for reuse. Customer C&A Tool Engineering, Inc. Industry Machining Products Vertical Axis Crusher Diagonal-Shaft ...


    By PRAB, Inc

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Analysis of the contact conditions between chip and tool using nanostructured coated cutting tools

    The stages of contact between a metal chip of AISI 1018 steel and a coated cutting tool creates significant opportunities for manufacturers of machined products to understand how dry machining and minimum quantity lubrication affects the economics of manufacturing. The present work not only compares various computational approaches to the solution of shear plane and tool face temperatures during ...


    By Inderscience Publishers

  • Marketing intellectual property using electronic libraries: a survey of system-on-chip engineers and managers in Sweden and Taiwan

    Intellectual Property (IP) trade concerns and the IP trade business models are important issues in the IP market and the system-on-chip (SoC) industry. A survey of Taiwan Hsinchu Science Park and Sweden Kista Technology Center SoC companies compares opinions of managers and engineers toward design libraries, global standards, and IP licensing. Since the added value of services gives electronic ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you