chipping equipment Articles

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Megawatt out of chips

    König + Neurath AG, one of the leading European office furniture manufacturers, in Karben near Frankfurt/Main besides other materials process derived timber products such as chipboards and multiplex boards to produce office furniture for nearly any furnishing purpose. The resulting wood residues are not discharged but processed to become combustible by means of which the complete heating and ...


  • Turning wood chips and sawdust into a valuable solid fuel

    RUF briquetting units are the economical solution for the processing of wood chips and sawdust. Where timber is planed, turned and sanded, manufacturers end up with large quantities of wood chips and sawdust. By briquetting this material, you can recover a valuable solid fuel. Where large quantities are produced, the single briquette pressing system developed by RUF GmbH is the most economical ...

  • A pannell of chipping experts perseverance, service and dependability are hallmarks for Oklahoma-based Pannell Chipping, Inc.

    While logging and landclearing professionals as a whole have often been broadly - and inaccurately - portrayed as anti-conservators of the land, one segment of that profession, chipping companies, have suffered disproportionately. Presented as insensitive to the benefits of good forestry, they have had to literally fight to prove that they are indeed good stewards of the land, providing a ...


    By Morbark, LLC

  • Making environmentally friendly fuel from wood chips - Case Study

    The RUF briquetting press earns the Ortinger company additional profits During the production of round bars or rods for flags, skewers and many more products made from wooden planks, lots of wood chips are accumulated. Instead of disposing of them as waste, the wood processor Ortinger presses them into briquettes, which they then sell as fuel. This way they can economically support ...

  • Machine shop for oil and gas services provider wins when the chips are down

    Chip Filtering Keeps Machine Shop Coolant Clean Since 1976, Facility Engineer Jay Wilson has handled the HVAC, electrical, and other operational facility needs for a key Texas-based plant within the FMC Technologies, Inc. (FMCTI) family. This leading global provider of technology solutions for the energy industry and other industrial markets was twice named as the Most Admired Oil and Gas ...


    By Abanaki Corporation

  • Michigan logger builds new chip fleet with Titan Trailers

    With successful operations already running in excavation and logging, Jim Carey was in no hurry to add new chip trailers to the fleet for his growing biomass business. He took his time to decide where he could expect to get the best return on his latest investments. “When we got into the chipping business four years ago, we bought reconditioned multi-axle trailers to get started. We had ...


    By Waste Advantage Magazine

  • Size Reduction Equipment Review

    Untitled Document LAST YEAR, BioCycle was approached by CalRecovery, Inc. - a ...


    By BioCycle Magazine

  • North Carolina firm offers full service land clearing: Morbark grinders provide backbone of operations for Shelton logging and chipping

    Stoneville, North Carolina - There are any number of critical facets to logging and land-clearing operations, including cutting, skidding, chipping, hauling, grubbing and grinding. To be able to provide support in any of these areas can prove both professionally and financially rewarding. To be able to offer customers the complete package - taking a prospective development from wooded area to ...


    By Morbark, LLC

  • How Important Mobility in Car Wash Equipment?

    If you own a mobile car wash business, it is required that your car wash equipment is designed specifically for easy transportation. Bulky machines are suitable for fixed location car washes, but when you need to spend the entire day traveling across the city to different clients, you need car wash equipment that is mobile and corrosion/chip resistant, to keep the system looking like new even in ...


    By Daimer Industries Inc.

  • Info on Non-Food Industry Equipment Cleaners

    Non-food industry equipment cleaners are ideal for cleaning heavy-duty industrial equipment and areas, such as floors and walls. These cleaning machines remove grease, carbon black, and many other types of dirt and impurities from metal, vinyl, tile, and similar surfaces. The power and effectiveness of non-food industry equipment cleaners can be attributed to the high pressure level, high ...


    By Daimer Industries Inc.

  • Selecting Appropriate Non-Food Industry Equipment Cleaners

    Non-food industry equipment cleaners are ideal for cleaning heavy-duty industrial equipment and areas, such as floors and walls. These cleaning machines remove grease, carbon black, and many other types of dirt and impurities from metal, vinyl, tile, and similar surfaces. The power and effectiveness of non-food industry equipment cleaners can be attributed to the high pressure level, high ...


    By Daimer Industries Inc.

  • Equipment changes help company redefine itself, cope with economic realities

    For years now, loggers have had to cope with the same daunting economic conditions currently plaguing the rest of the country today: tougher markets in which to sell, operations and contracts headed overseas, and pressure to do more with less. To survive, many in the logging and lumber industry have been forced to get extremely creative. So creative, in fact, that some bear little resemblance to ...


    By Morbark, LLC

  • Varian Semiconductor Equipment Assoc. Inc. – Gloucester, MA - Case Study

    Producing the heavy equipment that makes semiconductors and other chips demands a tremendous amount of electricity, so this publicly-traded company sought ways to cut massive utility bills and pursue renewable power sources. Varian Semiconductor Equipment, a division of Applied Materials Inc., is located in an industrial park in Gloucester, MA. The Cape Ann hilltop location offered prospects for ...

  • Maryland firm clears 200 acres for new quarry construction Baltimore-area project demands planning, execution and an arsenal of tree clearing/processing equipment

    In his 28 years in business, Bob Orndorff has done a lot of site prep projects — and his fair share of larger site prep projects. However, he is quick to admit that, until now, he has never cleared a site for construction of a quarry, and the one his is currently doing, in the Baltimore suburb of Jessup, MD, is one of the largest projects he has ever undertaken. His company, RLO Contractors, Inc. ...


    By Morbark, LLC

  • Flexibility with biomass size reduction

    With increased global demand for biomass as a renewable energy source, engaging in profi table and effi cient biomass handling has become priority No. 1 for processing plants worldwide. The equipment used to carry out the strict production requirements of chipping, grinding, shredding and conveying the wood chips is vital to the design and tonnage estimations of engineers. Choosing the right ...


    By TerraSource Global

  • Detection of PCBs in wood

    MATRIX: Wood, reduced to fine shavings or sawdust ANALYTE: Polychlorinated biphenyls (PCB) LIMIT OF DETECTION: 2 ppm as Aroclor 1260 MATERIALS: PCB EnSys 12T Soil Test System, Equipment: Tools for reducing wood to fine particles (refer to sample treatment section below). SAMPLE ...


  • A second generation of clear-cut success

    Massachusetts clearing and grubbing contractor builds on a 43-year legacy with great people and great equipment. Some of the most desirable land in the Northeast lies within the rolling, wooded New England countryside. Among the clearing and grubbing contractors performing the important first step of commercial and residential development in the area, one of the better known is Letourneau ...


    By Morbark, LLC

  • New rubber powder grinder

    The latest addition to the TRM range of specialized Tire Recycling Equipment is a mini grinder or Powder grinder. The design is modelled on the TRM Grinder. The TRM original grinder takes 2-3" chips of tires and grinds that to 1/2" and smaller down to 100 mesh at a rate of 1.5 tons per hour liberating steel and fiber from the rubber- a unique concept for tire recycling. The mini grinder or powder ...


    By TRM USA inc

  • Eriez Sweep Away Hazardous Ferrous Metals

    Eriez Magnetics Europe Ltd has helped one of the largest scrap processors in Britain with the problem of damaging pieces of scrap metal affecting the day to day running of their yard.  The simple addition of a Magnetic Sweeper to the tow bar of one of their vehicles solved their problem with its high strength magnetic field picking up and holding nails, wire, welding rod ends, bolts, ferrous ...


    By Eriez Magnetics Europe Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you