chloride meter Articles

  • Level measurement of ferric chloride case study

    MonoScan provides ongoing measurement results of Ferric Chloride (FeCl3) solution in one of Israel's most advanced wastewater treatment plant. The Ashdod wastewater treatment plant has invested significantly in state-of-the-art control systems to ensure 100% usage of the wastewater entering its facilities. The plant is self sufficient, by using its own resources providing power, water and gas. ...

  • Vinyl Chloride Attenuation By Direct Injection of Time-Release Magnesium Peroxide.

    ABSTRACT: This case study shows that there is potential to remediate dissolved vinyl chloride by oxygenation in the field. Residual vinyl chloride concentrations have been remediated in the field at a mid-western site with a phosphate-intercalated peroxygen (ORC®, a proprietary formulation of magnesium peroxide that releases oxygen slowly). The site was formerly operated as an aluminum coating ...


    By REGENESIS

  • Integrating toxicity reduction strategies for materials and components into product design: A case study on utility meters

    Using RIO Tronics utility meter products as an industrial case study, the numeric Fraunhofer Toxic Potential Indicator (TPI) assessment tool is employed to determine high impact materials with the aim of reducing the content of inherently toxic substances in these products. However, because product re‐design with alternative materials affects entire components, overall component toxicity ...


    By John Wiley & Sons, Ltd.

  • Ask The Noise Doctor: How Long will the Batteries Last in My Optimus Sound Level Meter?

    Do you have questions about your noise measurement instruments that Google or Wikipedia just can’t seem to answer? Ask The Noise Doctor. I’m here to answer your most frequently asked questions. Whether it’s product or application based, I’m up to the challenge. In this article I’ll be covering battery life in the Optimus Sound Level Meter range. A Commonly Asked ...


    By Cirrus Research plc

  • Indoor-outdoor relationship of suspended particulate matter and its chemical composition at different sizes

    The indoor-outdoor concentration relationship of particulate matter PM9.0 (aerodynamic diameter 9 µm or smaller) and its chemical composition (sulfate, nitrate, chloride and ammonium) has been studied. Samples were collected using four identical Anderson impactors, each one collecting nine size ranges by eight impactor stages (9, 5.8, 4.7, 3.3, 2.1, 1.1, 0.65 and 0.43 µm) plus a back-up ...


    By Inderscience Publishers

  • Evaluating the effects of septic tank on shallow wells in Iba housing estate, Ojo LGA, Lagos

    Water samples from 30 shallow wells were measured for depth, depth to water table, and distance to septic tank. In situ parameters including electrical conductivity, pH, total dissolved solids, and temperature were measured using portable meters. Chemical parameters including salinity, chloride, calcium, alkalinity and total hardness were determined using titrimetry method. Sulphate and nitrate ...


    By Inderscience Publishers

  • Enhanced Bioremediation of Tetrachloroethene in Central Indiana Glacial Till

    ABSTRACT: The goal of this project is remediation of soil and groundwater impacted by tetrachloroethene (PCE) that infiltrated the vadose and uppermost saturated zone below an active dry cleaning facility in central Indiana. PCE was released and transported to depths less than five meters via the primary porosity of thin sand and silt stringers and via secondary porosity of fractures in lodgment ...

  • Effects of road deicer (NACL) and amphibian grazers on detritus processing in pond mesocosms

    Road deicers have been identified as potential stressors in aquatic habitats throughout the United States and we know little regarding associated impacts to ecosystem function. A critical component of ecosystem function that has not previously been evaluated with respect to freshwater salinization is the impact on organic matter breakdown. The purpose of this study was to evaluate cumulative ...


    By John Wiley & Sons, Ltd.

  • Conductivity Theory and Measurement

    Electrical conductivity is a measure of the ability of a solution to cany* a current. Current flow in liquids differs from mat in metal conductors in that electrons cannot flow freely, but must be carried by ions. Ions are formed when a solid such as salt is dissolved in a liquid to form electrical components having opposite electrical charges. For example, sodium chloride separates to form Na" ...


    By IC Controls Ltd.

  • What are the key steps in measuring pH? Why do I need to calibrate?

    pH is a useful parameter which is used across all industries for quality control, environmental monitoring, lab work and much more. There are 10 key steps which should be followed to ensure pH measurements using a meter are accurate. pH is a useful parameter which is used across all industries for quality control, environmental monitoring, lab work and much ...


    By Camlab Limited

  • Biotreatment of Odors from the Zimpro Sludge Conditioning Process

    Management of odor emissions generated during thermal sludge conditioning is a well known disadvantage of the “Zimpro” process. Traditional methods of using chemical oxidation and high temperature destruction result in the formation of secondary products, such as chlorine gas, organic halocarbons or nitrogen oxides. In this study, biotrickling filter technology was evaluated at the Villa Hills ...


    By PRD Tech, Inc.

  • Removal of Chromium From Effluents of Tanning Industries and its Reuse

    Air and water are the basic needs of human being and other living entities on the earth. Tanning industry uses water and some chemicals and so creates environmental problems, depending basically on two principal sources, hide and water. The processes of tanning are based on chromium sulphate and vegetable treatment of hide. According to the national environment quality standards (NEQS) the ...


  • Usen

    “Oil is not only an important sector of our industry but also a symbol of the independence of our country, of the hope for a better future”. These were the words of President Nursultan Nasarbayev in September 1999, commemorating the 100th anniversary of the formation of the oil and gas industry. The oil industry in Kazakhstan has existed for more than 100 years, however a significant boom in this ...


    By Flottweg SE

  • How to Save with Cooling Tower Credits

    Cooling towers dissipate heat from recirculating water used to cool chillers, air conditioners, or other process equipment to the ambient air. Heat is rejected to the environment from cooling towers through the process of evaporation. Therefore, by design, cooling towers use significant amounts of water. The thermal efficiency and longevity of the cooling tower and equipment depend on the proper ...


    By WaterSignal

  • Cosmetics production with smart wastewater treatment– with the disposal technology from DAS

    Emil Kiessling GmbH relies on the TFR technology from Dresden (Germany) for wastewater treatment Emil Kiessling GmbH with headquarters in Georgensgmünd, Middle Franconia (Germany), is a successful cosmetics manufacturer. The product range includes natural cosmetics through to sun ...

  • Water softeners fact sheet

    What is hard water? According to a recent U.S. Geological Survey, 85 percent of the United States’ geography has hard water. Hard water is water that contains certain naturally occurring minerals, particularly magnesium and calcium. Hard water causes many problems in a home, including deposits in sinks and bathtubs and gummed-up pipes in home plumbing systems and water-using ...


    By Kinetico International

  • Detection of polychlorinated biphenyls (PCBs) in concrete using the dtech test system

    MATRIX: Concrete ANALYTES: Polychlorinated biphenyls (PCBs) RANGE OF DETECTION: DTECHTOR: 500 ppb to 25 ppm (as aroclor 1254). Color Card: 1 ppm to 25 ppm (as aroclor 1254) MATERIALS: DTECH PCB Test Kit. DTECH PCB Sample Extraction Kit. Reagents: table salt (sodium chloride) or salt packets used by restaurants ...


  • Watson-Marlow peristaltic pumps in breakthrough application - Case Study

    South West Water is using a peristaltic pump from Watson-Marlow Fluid Technology Group for dosing coagulant into raw reservoir water for purification purposes. It is thought to be the first time peristaltic technology has been used on a coagulant application, certainly within the southwest region. Originally the plant, near Falmouth in Cornwall , employed two conventional ...

  • Oil and Gas Development - Onshore Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Tanning and Leather Finishing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you