clay water filter media Articles

  • Dual-media filters, Fredrikstad waterworks, Norway

    Fredrikstad Waterworks in southeastern Norway has an annual water production of 15 mill. cubic metres and supplies the municipalities Fredrikstad and Hvaler. During autumn 2003 they have renovated their dual-media filters. After around 8 years of operation, the volume of filter media in the existing sand/anthracite-filters was significantly reduced resulting in poor filtering ...

  • Chemical and microstructural analyses for heavy metals removal from water media by ceramic membrane filtration

    This study aims to investigate the ability of low cost ceramic membrane filtration in removing three common heavy metals namely; Pb2+, Cu2+, and Cd2+ from water media. The work includes manufacturing ceramic membranes with dimensions of 15 by 15 cm and 2 cm thickness. The membranes were made from low cost materials of local clay mixed with different sawdust percentages of ...


    By IWA Publishing

  • Particle removal efficiency of Nano alumina fiber filters

    A 2 nanometer alumina fiber is combined with a microglass fiber to produce a nonwoven filter. Its pore size is 2 microns, yet it is functionally rated at 0.03 microns. Data are presented showing dirt holding capacity and filtration efficiency for particles from 0.001 to 7 microns. The filters have high retention for micron size silica dust, bacteria, virus, DNA/RNA, tannin and latex spheres. ...


    By Argonide Corporation

  • Compost in the mix for storm water management

    Bioretention areas, also known as rain gardens, are increasingly being used to capture and treat storm water runoff from impervious surfaces such as roofs, sidewalks and parking lots. These landscaped areas often feature native plants installed in an engineered soil mixture that includes compost. “Bioretention areas or rain gardens are an attractive storm water Best Management Practice (BMP) ...


    By BioCycle Magazine

  • Biological drinking water treatment Hong Kong

    The water treatment works takes water from the river Dongjiang in the Guangdong Province north of Hong Kong. The raw water has an average turbidity level of around 11 NTU and contents, among other things, ammonia and manganese. Water temperatures range from 12 to 34oC.   During planning of the waterworks ...

  • How deep is your BAF? Evaluation of different bed depths for high rate biological denitrification filters with limit of technology pollutant removal

    Downflow Denitrification Filters are tertiary water and waste water treatment systems that allow denitrification and suspended solids removal to occur in a single step and allow limit of technology pollutant removal. With more and more stringent nutrient removal regulations coming up, downflow denitrification filters have increasingly become the solution of choice for plants faced with the ...

  • ENI - 100 m3/h produced water treatment

    Client: ENI Blacktip Field CETCO Oilfield Services is to boost operations in northern Australia, working with integrated energy company ENI after winning a contract worth over $650,000 AUD. ENI turned to CETCO to assist with its water treatment requirements in the Blacktip Field, due to come online in 2009. This project is a significant step for both companies towards a greater presence within ...


    By CETCO Energy Services

  • Best management practices (BMPS) for discharging water from a construction site

    Having problems on your job site with regulations related to pumping water from your site? Discharge water may carry harmful compounds that can, and have affected our water quality and the ecosystem, hence the environmental agencies concerns. When pumping from dewatering systems, storm water management ponds (SWMPs), excavations or trenches, or any form of surface runoff, BMPs are needed to ...


    By Aquatech Dewatering Company

  • Water treatment helping cars stay cool - automotive industry: Orlando, Florida

    A manufacturer of air-conditioning line connectors for automobiles was required by the city to meet new sewer discharge standards. They had been using a system of gravity separation which did not address suspended solids or soluble metals. Their wastewater is generated from 3 sources; mop water, parts deburring and polishing, and floor scrubber water. They generate approximately 6,000 gpd of ...


    By CETCO Energy Services

  • Low-Flow (Minimal Drawdown) Ground-Water Sampling Procedures

    Untitled Document Background The Regional Superfund Ground Water Forum is a group of ground-water ...


    By Solinst Canada Ltd.

  • Case study - Filtralite Fredrikstad

    When renovating the filters the waterworks was interested in testing alternative filter media and replaced the anthracite layer in one of the filters with Filtralite® media for evaluation. Filtralite® is a filter media made of expanded clay and delivered by Saint-Gobain (Weber). In March 2002 Filtralite® media was installed on top of the existing sand in one out of totally 8 filters. ...

  • Case study - Hong Kong

    To meet the forecasted increases in demand for potable water, the new Tai Po Water Treatment Works has been built in Hong Kong. The plant has a production capacity of 1200 Ml/day This solution strongly reduced the chlorine demand for the plant compared to the alternative execution with break point chlorina The water treatment works takes water from the river Dongjiang in the Guangdong ...

  • Phosphate treatment by onsite wastewater systems in nutrient-sensitive watersheds of North Carolina's Piedmont

    The goal of this study was to gain a better understanding of the PO4-P treatment efficiency of onsite wastewater systems (OWS) installed in nutrient-sensitive watersheds of the North Carolina Piedmont. Four OWS including two conventional and two single-pass sand filter (SF) systems were evaluated at sites with clay-rich soils. Piezometers were installed near all of the OWS, and down-gradient ...


    By IWA Publishing

  • Biological wastewater treatment Dalian, China

    To manage the demands set for the plant, a biological treatment with fixed bed was chosen. The water first undergoes pre-treatment by screening and grit/grease removal. Primary sedimentation is done in 4 tanks with lamellar sedimentation.   The first step in the biological treatment consists of BOD, COD and SS ...

  • LiquiSorb 200 saves time and money before the rubber hits the road

    Problem In tire manufacturing there is much more to the finished product than just rubber. Tire chords, a by-product of the manufacturing process, are coated with a proprietary dip solution that acts as a flexible adhesive/bond in tires. This dip solution has an extremely high concentration of solids in water, making traditional wastewater treatment techniques less effective, extremely slow, and ...


    By CETCO Energy Services

  • Brick Manufacturer Wastewater Case Study

    Manufacturing Wastewater Treatment Case Studies Brick Processing Manufacturer Wastewater Treatability 10.16.2009 The Morin Brick ...


    By Integrated Engineers Inc.

  • Case study - Emergency equipment for the absorption of chlorine in hospitals

    Chlorine is a strong oxidant that in normal conditions and in its pure state formsdichlorine, a toxic gas with a yellow-greenish colour formed by diatomic molecules (Cl2) that are about 2.5 times heavier than air and have an unpleasant smell. Among its multiple applications and due to its powerful oxidising nature, it is widely used forwater purificationin sewage treatment plants and as ...


    By Bioconservacion SA

  • Thermal Treatment Technologies

    Hot gas decontamination: Hot gas decontamination is a technology still in the pilot-scale of development that can be used for decontamination of explosives-contaminated masonry or metallic structures. The method involves sealing and insulating the structures, heating with hot gas stream to 260 °C (500 °F) for a prescribed period of time, volatilizing the explosive contaminants, and destroying ...

  • Microfiltration vs Ultrafiltration Processes: What is the Difference?

    Microfiltration (MF) and ultrafiltration (UF) are both processes by which a contaminated liquid is passed through a semipermeable membrane that removes solids too large to fit through the membrane’s pore size, yielding a purified liquid stream. To what degree the stream is purified depends on the contaminants present and the pore size of the membrane. MF and UF are generally ...


    By SAMCO Technologies, Inc.

  • Thermal Desorption

    Untitled Document Introduction: ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you