clean air duct Articles

  • Marketing Residential Air Duct Cleaning Services check list

    The best marketing you can do is delivering good quality work. Satisfied customers (who will refer you) are the least expensive and most effective marketing tool created. It is estimated that 60% or more of your business will come from referrals. Quality work/customer satisfaction is your first and most important marketing tool. Take before cleaning and after cleaning photos. This shows ...


    By Vac Systems

  • The Right Mix for Clean Air

    Reducing air pollution is an increasingly important topic all around the world. Many governments—also in developing countries—set new limits for emissions such as nitrogen oxides in flue gas. Sulzer offers advanced mixing technology for flue gas cleaning. The installation in a large power plant shows that these high-performance mixers can cope with the most difficult requirements. ...


    By Sulzer Ltd.

  • OPERATION OF DUCT PRODUCTION LINE

    The normal operation of the duct production line is inseparable from the normal operation of the machine. Therefore, in order to ensure the normal operation of the machine and daily production of the air pipe does not appear stops caused by faults, it is necessary to carry out maintenance of the duct production line. 1. The material requirements of the flexible pipe of the air duct ...

  • Clearing the air on “free Air CFM” - Specs for portable duct cleaning vacuums

    Many times when researching equipment for duct cleaning vacuums you will find manufacturers posting the CFM suction ratings on their vacuums as “Free Air” or “bench Test”. The Free air test is the rating on the impeller wheel of the vacuum, simply put it is the maximum amount of airflow the impeller can produce with out any restriction. It seems as though many ...


    By Hypervac Technologies

  • Why Clamp Together Ducting - KB Duct

    If in the market for industrial ducting, you are probably weighing your options for ...


    By CECO Environmental

  • Dust Collection Ductwork

    If you are a plant manager, maintenance manager, process engineer, or Environmental Health and Safety (EHS) manager who faces the challenges of collecting and/or recovering wood dust, metal shavings, chemical powders, pharmaceuticals, or other abrasive materials, then you understand the importance of not just dust collector technology, but also dust collection ductwork. Selecting and investing in ...


    By CECO Environmental

  • Troubleshooting of Raymond Mill

    Common failure 1 Low yield or without flour  Reasons: (1) The powder lock has not been adjusted properly and the seal is not tight, which causes powder inversion. (2) The shovel knife is worn out and the material cannot be shoveled. Removal methods: (1) Check and adjust the seal of the powder locker, and find that the air leak should be shoveled. (2) Replace the new spade. Common failures 2 ...

  • Winning strategies for commercial air duct cleaning

    Commercial air duct cleaning is different than residential air duct cleaning. The work hours are different; the HVAC systems are larger and more complex.  You’ll need more types of cleaning tools, more financial resources, more knowledge and more connections!  The challenges are many but the rewards are great - if you’re successful!  What do you need to do to be ...


    By Vac Systems

  • TopAir`s Fume Hood

    TopAir, Statitech Israel’s flagship brand, manufactures a full line of superior cleanroom equipment including a reliable fume hood for neutralizing potential airborne chemical hazards in the laboratory. The fume hood mechanism offers maximum protection to laboratory staff working at a cleanroom table under the fume hood.   There are two basic types of fume hood. Many industries use a ...


    By TopAir Systems

  • Ducted or Ductless Fume Hoods? Is this the real issue?

    Most laboratories will need some form of fume cabinet at some point. The type of cabinet is usually the starting point of the process, and the choice of either ductless or ducted cabinet is made. With the ever increasing need to save money and to be environmentally responsible there are other considerations that need to be explored before a decision can be reached. ...


    By Camlab Limited

  • Safe House?

    A client who had lived in her house for more than ten years was concerned that her son who suffers from certain inflammation problems might be affected by poor air quality. Investigation: The home is a well maintained twenty year old two story house with a forced hot air heating system with same duct central air. The HVAC system incorporated a merv 6 air filter with an ultra violet ...


    By Healthy Air Cape Cod

  • Case study - Rubber curing emissions

    Overview A rubber curing company was looking for a new, affordable abatement solution to treat their blue haze and low-level Volatile Organic Compounds (VOCs) in order to meet regulatory requirements. The large Electrostatic Precipitator (ESP) in use was extremely expensive to operate and maintain. The company began their search for a system that offered effective opacity control and ...

  • Selecting the right air duct cleaning tools for the job!

    Part 1 – Cleaning Tools for Residential/Light Commercial Projects Residential air duct cleaning contractors face the challenge of cleaning a wide variety of ducts; sheet metal, flex duct, ductboard, internally lined ductwork, etc. Unfortunately with this many different types of ductwork there is no one magic cleaning tool that can clean every type and size of duct.  Selecting ...


    By Vac Systems

  • Vertical Flow Fume Scrubbers are Suitable for Chemical Producers, Metal Finishing, Semiconductor Manufacturing and Other Operations Generating Fumes and Gases.

    Tri-Mer fume hoods are manufactured for process and laboratory use. Tri-Mer fume hoods are ideally suited for corrosive or volatile exhausts. Construction materials include polypropylene, PVC, mild or stainless steel and high-alloy materials. Standard features include a low maintenance design, 110V power operation and minihelic exhaust gauge. Fume hoods can be equipped with activated carbon or ...

  • Mist Collector - Case Study

    A major midwest metalworking facility uses 24 OM-1 Mist Collector units ducted to over 200 sources, including grinding, dressing, CNC machining, lathes and heat treating operations. The units are highly effective against coolant mists, lubricant mists, and more. OM-1’s ability to accommodate smoke gives it an advantage over centrifugal-type oil mist collectors, which are not ...

  • Acceptance Specification and Design of Dust Free Workshop

    1. Reasonable layout of process flow and building plane; 2. Choose building structures and materials that meet the characteristics of dust-free workshop; 3.Dust-free workshop design should select reliable and economical cold and heat sources according to the local energy supply background at that time. 4. Divide and arrange air-conditioning purification and exhaust systems; 5. Choose ...

  • Fume control in large weld cells case study

    The Problem Tayco-Panelink is a Canadian based manufacturer of office furniture. Their customer base is worldwide. In 2001, DiversiTech installed a small fume extraction system which continues to do the job today. With this in mind, Tayco called on us to set up their new welding cell. Unfortunately, the welding fixtures were too large to accommodate a source capture system.   ...


    By Diversitech

  • Case study - Bakery ethanol

    Overview A bread and bun bakery was faced with installing air pollution control equipment to control the volatile organic compounds (VOCs) emitted during their baking process. The local regulatory agency requires bakeries that generate over 25 tons of ethanol per year to reduce emissions by 95% by installing control devices on their ovens. The airstream that needed to be treated included ...

  • The Use of Particulate Emission Monitors to Support Arrestment Plant Operation and Upkeep

    The operation of filtration type arrestment plant can be optimised by the effective use of Particulate Emission Monitors (eg Filter Leak Monitors and Filter Performance Monitors). Particulate Emission Monitors are installed throughout the broad spectrum of industrial processes to satisfy regulations (IPPC, Part B Guidance Notes, WID and LCPD) for emission limit enforcement. In addition, where ...


    By ENVEA

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you