clean room air flow Articles

  • Controlling Bacteria In a Clean Room Environment

    Maintaining the integrity of a cleanroom is a constant battle. The first step to deciding which method, or combination of methods, to employ is to identify the prime sources of contamination. There are three prime sources of contamination through which the integrity of a cleanroom might be breached. First, there is the human element. While many processes might be automated, many situations remain ...


    By GVS Filter Technology

  • Cleaning & maintenance management

    Mercury is a known neurotoxin that is extremely toxic even in small amounts. It directly affects the central nervous and renal systems, causing developmental delays, motor and brain problems like those associated with autism. Mercury’s hidden danger also lies in when at room temperature and exposed, it vaporizes readily. Once it has become an aerosol, it is absorbed into the lungs and ...


  • The natural way to clean wastewater

    John Todd founded Ocean Arks International in the 1980s, where he started to experiment with processes that mimic natural ways to purify wastewater. He built a greenhouse and ran sewage through a series of tanks, with plants suspended in the flowing waters, and constructed marshes made of sand and gravel. No chemicals were added, but plenty of aquatic creatures from snails to small fish were ...


    By BioCycle Magazine

  • Why need to clean water scale case study

    The Importance of Equipment Cleaning Mineral scale occurs wherever circulating water exists, and it forms very fast (generally less than 3 weeks). Even a very thin layer, it will also cause insulation, make equipment inefficient, increase cost, and in some serious cases, it will shut down the whole system and even cause explosion. These problems have already existed in different fields, and ...


    By Mibo International Corp.

  • Case study - Automotive parts coater exceeds local air quality requirements

    Today many companies are faced with unique air pollution control problems arising from their coating operations. Not only are vented emissions required to be controlled, but now a more pressing issue is how to treat fugitive emissions. Fugitive emissions are the VOC and HAP releases that occur at the coating process or in a mixing area. Fugitive emissions are sometimes difficult to capture when ...

  • The mills grind efficiently

    The – “Milser Mühle“ – has relied on AERZEN for 50 years When the Borgstedt Family took over the Milser Mühle 130 years ago, at first, it only produced feed material, and then, from 1918, it started to produce flour for human food. “Therefore we selected oilfree compressing AERZEN Positive Displacement Blowers of series GM as conveying air producer ...

  • TopAir`s Pass Box

    A pass box is a structure located at the entrance to a cleanroom that enables materials to be transported between the cleanroom and the rest of the laboratory without compromising the sterility of the materials or surrounding cleanroom area. The pass box allows laboratory personnel to stay within the cleanroom instead of moving to different parts of the lab to fetch tools or materials, therefore ...


    By TopAir Systems

  • Understand the Capabilities of Bio-Oxidation

    Biological air-pollution control technology* has been used extensively in Europe for decades and, to a lesser extent, in North America for the past two decades. Most installations in the U.S. have been on air-emission vent streams that were not subject to numerical limits (i.e., ...


  • Every kilowatt utilised optimally

    Heat recovery with AERZEN blowers As a part of an extensive renovation project, the city of Filderstadt modernised the Bombach wastewater treatment plant, located in the district of Bonlanden. Now, Delta Hybrid rotary lobe compressors made by AERZEN provide optimal oxygen supply, and, thanks to heat recovery measures, the energy balance has improved further. Although ...

  • Top 10 Valve Considerations for Pressure Management Zones/DMA’s

    For basic pressure management or more advanced modulating pressure management, water suppliers create a network of District Metered Areas (DMA’s) or smaller, more manageable pressure management zones. The DMA or pressure zone gives the ability to measure flow and control pressure, when a Pressure Reducing Valve (PRV) ...


    By Singer Valve Inc.

  • Typical Sensor Location Considerations

    The sensor mounting location within a space may be dependent on many variables. There are no specific formulas since each application will have it’s own determining factors and priorities. These include, but are not limited to: source of gas: Is the source a combustion exhaust from a vehicle or furnace or a vapour from a tank spill, pipe leak, or faulty valve? density of ...


    By Arjay Engineering Ltd.

  • Improving energy efficiency: About oil fouling in refrigeration systems

    Introduction Most air conditioning and refrigeration systems have a mechanical compressor which relies upon lubricating oil to function. During the normal course of the refrigeration process, ½% to 8% of the compressor’s lubricating oil is circulated throughout the system along with the refrigerant. Since the early days of refrigeration and air conditioning technology, the ...


    By Power Knot LLC

  • Environmental Initiatives in the Hotels Industry: Parkroyal on St Kilda Road

     By involving all of its staff, the Parkroyal on St Kilda Rd made some simple housekeeping and equipment changes that improved its environmental performance and saved money. Annual energy savings alone are nearly $30,000 and potential for further savings have been identified. Other measures have involved water conservation and paper recycling. Staff and guests have responded well to the ...


  • How to tap the energy savings in greywater

    Many operators of offices, hospitals, hotels, large condos, and other buildings are aware of the need to save money and reduce their environmental impact, through better water management. The result has been the growth of ways to reduce water consumption, ranging from low-flow show-crheads to landscaping that requires minimal watering. Building operators are also aware of a similar need to ...


    By DDI Heat Exchangers Inc.

  • Technical Hints and Tips for Optimal Performance of your Loeser Osmometer

    General function and description: The sample (serum, blood, urine or any other aqueous solution) is filled in a plastic sample tube and cooled via a Peltier element. These are semiconductor devices, which become cold ...


    By Camlab Limited

  • Why Water Scale is Dangerous for Equipment

    Mineral scale occurs wherever circulating water exists, and it forms very fast (generally less than 3 weeks). Even a very thin layer, it will also cause insulation, make equipment inefficient, increase cost, and in some serious cases, it will shut down the whole system and even cause explosion. These problems have already existed in different fields, and are becoming worse and worse. ...


    By Mibo International Corp.

  • DESMI Lifts Green Ship Business Case

    New rules call for fresh approach It’s hardly news that the shipping industry is mobilising to meet the demands of wave after wave of new environmental regulations. From the IMO’s ballast water management legislation to EEDI (the Energy Efficiency Design Index for new ships) and SEEMP (Ship Energy Efficiency Management Plan), shipowners need to be ready to drastically cut ...


    By DESMI A/S

  • Scaletron - case study

    The Customer L A Maintenance is a leading building services maintenance contractor well known for its innovative approach. One of its functions is the maintenance of air-conditioning units for computer suites and other areas where controlled air quality is essential. The problem In order to ensure a controlled air quality the air conditioning units are ...

  • Monitoring level of fuel and diesel oil in cylindrical tanks case study

    SmartScan 50L delivers a reliable measurement solution for monitoring fuel and diesel oil in a municipal Central Post Office. This Post Office provides postal services throughout the country. To provide its services around the clock, the office invests huge efforts in maintaining its building at the highest standards. The problems The Central Post Office uses fuel oil for ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you