clean room measurement Articles

  • Controlling Bacteria In a Clean Room Environment

    Maintaining the integrity of a cleanroom is a constant battle. The first step to deciding which method, or combination of methods, to employ is to identify the prime sources of contamination. There are three prime sources of contamination through which the integrity of a cleanroom might be breached. First, there is the human element. While many processes might be automated, many situations remain ...


    By GVS Filter Technology

  • Operating Room - UVC lights provide infection control, green benefits

    Muskogee Community Hospital (Muskogee, OK) is using germicidal UVC (ultraviolet C) Emitters™ from Steril-Aire as part of an innovative infection control measure. The devices were installed in the air handling units and in custom-designed, ceilingmounted units in the surgical and procedural suites, marking the first time a hospital has used UVC technology in this way. Steril-Aire devices ...


    By E-CO

  • Clean goes green

    Her daughter's eyes were pink and puffy. The child's nose was scratchy and runny. Nancy Figueroa of Jamaica Plain did everything she could to make her daughter well: She bought one medicine after another; did more wash than a 24-hour laundromat; gave to charity her daughter's stuffed animals that might be carrying dust, including the little monkey that young Katherine clung to for comfort. Still ...

  • Cleaning & maintenance management

    Mercury is a known neurotoxin that is extremely toxic even in small amounts. It directly affects the central nervous and renal systems, causing developmental delays, motor and brain problems like those associated with autism. Mercury’s hidden danger also lies in when at room temperature and exposed, it vaporizes readily. Once it has become an aerosol, it is absorbed into the lungs and ...


  • Cleaning & maintenance magazine

    An analysis of the lighting industry shows a trend away from incandescent bulbs to fluorescent bulbs. Incandescent bulbs use more energy and are more costly and less effective than fluorescent bulbs in the amount of artificial light they produce, as fluorescents produce more lumens than incandescents. Using fluorescent bulbs, however, is not entirely without risk because they contain mercury, a ...


  • Cleaning Up With Rent-a-Chemical

    Lease programs are emerging as a safer, more environmentally friendly way to manage chemicals. Imagine if instead of making a list, buying groceries and sometimes running out of milk or ending up with spoiled food in the fridge, you engaged a company that helped analyze exactly how much food your household uses each week based on the meals cooked and eaten. That company would then deliver ...


    By Ensia

  • Technology: clean air’s unsung hero

    Last year, we celebrated the 40th anniversary of the U.S. Clean Air Act (CAA) and the 20th anniversary of the 1990 Amendments to the CAA. The CAA has been a huge success. From 1990 to 2008, emissions of six common pollutants were down 41%, while gross domestic product grew 64%. Emissions of volatile organic compounds dropped 31%, carbon monoxide dropped 46%, and sulfur dioxide dropped 51%. Lead ...

  • Why need to clean water scale case study

    The Importance of Equipment Cleaning Mineral scale occurs wherever circulating water exists, and it forms very fast (generally less than 3 weeks). Even a very thin layer, it will also cause insulation, make equipment inefficient, increase cost, and in some serious cases, it will shut down the whole system and even cause explosion. These problems have already existed in different fields, and ...


    By Mibo International Corp.

  • What are the key steps in measuring pH? Why do I need to calibrate?

    pH is a useful parameter which is used across all industries for quality control, environmental monitoring, lab work and much more. There are 10 key steps which should be followed to ensure pH measurements using a meter are accurate. pH is a useful parameter which is used across all industries for quality control, environmental monitoring, lab work and much ...


    By Camlab Limited

  • Low level moisture measurement in Natural gas using a Lunable diode laser absorption spectroscopy (tdlas) based laser case study

    Introduction The measurement of water vapor in natural gas has long been of industrial importance, and has been addressed by a variety of analytical techniques over the years. Chief among these techniques has been the quartz crystal microbalance (QCM) based analyzers. The QCM technology is still the workhorse for production and pipeline applications, and the technique is considered by most ...

  • Safe House?

    A client who had lived in her house for more than ten years was concerned that her son who suffers from certain inflammation problems might be affected by poor air quality. Investigation: The home is a well maintained twenty year old two story house with a forced hot air heating system with same duct central air. The HVAC system incorporated a merv 6 air filter with an ultra violet ...


    By Healthy Air Cape Cod

  • Sonochemical synthesis and characterisation of bio-based hydroxyapatite nanoparticles

    Bio-based hydroxyapatite nanoparticles were synthesised via the sonochemical route using phosphoric acid and bio-based calcium carbonate particles extracted from eggshells. Hydroxyapatite is a natural bio ceramic material that contains calcium phosphate group. In this procedure phosphoric acid solution was used as the source of phosphorus and eggshell particles were used as the source of ...


    By Inderscience Publishers

  • Case study - Safety, Protection against corrosion and cabinet pressurisation in refineries

    The environment in a refinery is highly corrosive. This makes it necessary to deploy control systems not only to protect staff but also to protect the equipment controlling the processes, in order to ensure their reliability. Bioconservacion has equipment that is specially designed for the safety of staff, and for protecting against corrosion in control rooms and cabinet pressurisation equipment. ...


    By Bioconservacion SA

  • Exposure to dust, endotoxin and airborne microorganisms in wastewater sludge thermal drying units

    The objective of this study was to assess workers' exposure to bioaerosols in sludge drying units. Simultaneous collection of inhalable dust and airborne biological agents was carried out using rotating cup samplers (CIP 10, Arelco). Sixteen stationary and 30 personal measurements were performed in three drying plants, during summer and winter. Microbial content of air was characterized by high ...


    By IWA Publishing

  • Technical Hints and Tips for Optimal Performance of your Loeser Osmometer

    General function and description: The sample (serum, blood, urine or any other aqueous solution) is filled in a plastic sample tube and cooled via a Peltier element. These are semiconductor devices, which become cold ...


    By Camlab Limited

  • Keeping the right level; preventing wastewater spillovers case study

    SmartScan 25 provides a most accurate ultrasonic solution for level measurement of waste water flow in a wastewater plants. Wastewater plants provide the cities water purifying services, to maintain a green environment for the local habitants as well as the natural resources. The amount of wastewater transferred by the local municipalities to the plants is measured daily and therefore demands a ...

  • How to prolong the service life of biomass fired boiler

    Because of the shortage of energy and environmental deterioration caused by the extensive use of fossil fuel,biomass fired boiler has played a more and more important role in the industrial boilers.Therefore,we need to focus on the following aspects of work to ensure its normal operation and prolong its service life: ...

  • medtradex - case study

    Customer: Medtradex bvba Sector: Medical sector / hygiene Country: Belgium Technology Supplier: Microtronics Engineering GmbH Year of Cooperation: 2011 Website: www.medtradex.com The Customer Medtradex is an expert in hygiene and offers both equipment and products for cleaning, disinfection and sterilization of instruments and surfaces for the medical ...

  • Four Tips to Use Pressure Washers for Auto Detailing

    Pressure washers are known for their capability to carry out difficult cleaning tasks on hard surfaces. These machines are used for outdoor cleaning jobs, such as cleaning parks, pavement, stadiums, and more, as well as industrial cleaning, such as heavy-duty industrial degreasing. However, pressure washing machines are flexible. For example, they can be used for auto detailing, too. ...


    By Daimer Industries Inc.

  • Ozone systems for beginners

    This paper is intended for people who know a cooling tower when they see one but have little or no knowledge of their care or what part ozone plays. I have tried to make this as simple as possible and there is even a block diagram on the last page to help you out. Ready? Okay, here is what you need to know first: The sole function of ozone use in evaporative cooling towers is to disinfect water. ...


    By Zentox Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you