clean welding air Articles

  • Fume control in large weld cells case study

    The Problem Tayco-Panelink is a Canadian based manufacturer of office furniture. Their customer base is worldwide. In 2001, DiversiTech installed a small fume extraction system which continues to do the job today. With this in mind, Tayco called on us to set up their new welding cell. Unfortunately, the welding fixtures were too large to accommodate a source capture system.   ...


    By DiversiTech

  • Flexible welding fume extraction system in plant

    The challenge VAM Drilling (Vallourec Mannesmann Oil & Gas Nederland BV) is located in Heerhugowaard, the Netherlands. This facility has been around for over 40 years. Approximately 20 employees are turning/welding in the plant on a daily basis. Sometimes even 24 hours a day, if projects need to meet certain ...


    By Plymovent Group BV

  • Clean and fume free environment for students

    The challenge A new facility was erected at the Vredenburg Campus (South Africa) in December 2008. Ventilation was not considered in the development stage of the facility and was, therefore, very poor with only natural air flow through open doors and windows and some ‘whirlybirds’ in the roof of the ...


    By Plymovent Group BV

  • Cleaning up the tramp oil act

    For a year after changing to synthetic coolant, the people at Charles E. Kline Co., Warren, Ohio were plagued by the problems of contamination from tramp oil. Every "home remedy" they could think of was tried. "We shot air into the tank. We ran the level up and tried to glide the tramp oil off with ropes. We even had our men try to scoop it off with their hands. And we were still having to change ...


    By Oil Skimmers, Inc.

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • Air Pollution Control: Ready for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Case History - Air Pollution Control in the Textile Industry: a Technology for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Intraurban variability of Ambient PM Arsenic and other air toxics metals case study

    The Missouri Department of Natural Resources (MoDNR) and Washington University participated in a project to collect and analyze air toxics metals data. It was funded through a Community Air Toxics Grant from the U.S. Environmental Protection Agency (USEPA). The study grew out of the southside St. Louis Community Air Project (CAP) which identified six hazardous air pollutants of concern including ...


    By Cooper Environmental

  • Textile Industry: Air Pollution Control Through Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers and Other Technologies

    Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers are an excellent solution for air pollution in the textile industry. The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well ...


    By CR Clean Air Group, LLC

  • Health and safety at work

    The challenge The production activities of equipment such as cooling towers, condensers and cooling installations in aid of air conditioning systems require a lot of metalworking and welding. Baltimore Aircoil concluded for itself that the extraction of welding fumes and hazardous gases in the production halls could be ...


    By Plymovent Group BV

  • Ventilation/filtration system is main heat source

    The challenge K.S. Smede og Montage, a smith’s working-place, was about to expand their business and move to new premises. As they were expanding, K.S. Smede og Montage took this opportunity to purchase a new ventilation/filtration system to extract welding fumes and grinding dust more effective. One of the ...


    By Plymovent Group BV

  • The Function and Purpose of Portable Dust Collectors

    Portable dust collectors are movable devices that are useful to decrease and collect contaminant substances from the air in your work environment, producing units and plants. Portable dust collectors are small devices and portable, which means they can easily be transferred from place to place. Structure The ...


    By ProVent, LLC

  • The Major Components of Heat Exchangers

    Heat exchangers are not only one of the most common pieces of equipment found on industrial sites, they are also one of the most important. Despite the name, heat exchangers are used for both heating and cooling and are actually used more often for cooling, especially on industrial sites such as refineries or processing plants. These pieces of equipment are not “one size fits all.” In ...


    By STI Group, Inc.

  • How Downdraft Tables Change Your Work Environment

    Working with metal and wood results in the release of harmful dust particles into the atmosphere, which is dangerous to the workers’ health. Continuous exposure to these particles means your employees will be breathing in the dust, which can lead to both short and long term health problems. In order to maintain the health and safety of your employees in the workplace, downdraft tables must ...


    By ProVent, LLC

  • Here’s What I Know About Dust Collection Booths

    If there is too much dust in the workplace, it can cause many problems and the most serious is the short and long term health problems. Not only does dust make the place all messy and dusty, but also means you and your employees are breathing in harmful particles. The problems usually start off by allergic reactions and can turn into major respiratory problems. Also, a large amount of dust at ...


    By ProVent, LLC

  • The Different Kinds of Dust Collection Booths

    Factories that produce heavy dust particles require a dust collector system in place, so employees can breathe in clean and pure air at all times. Also, with one of these systems in place, machinery functions well and lasts longer. Dust collection booths also help limit dust into a closed area and safely trap it inside a closed space for ...


    By ProVent, LLC

  • Hydro-Transporting Food: best practices for food processing pumps

    Processing plants look for continuous and trouble-free operation from a pump capable of transporting even the most delicate whole food products or processed foods, while keeping product damage to a minimum. This ensures the highest profits for the plant. Cornell pumps help hydro-transfer systems to clean and convey potatoes, carrots, cranberries, pickles, cherries, beans, peppers, leafy ...


    By Cornell Pump Company

  • Power Case Study - North Incinerator

    North Incinerator Finds Solution to Excessive Sweep Elbow Wear At Montgomery County's North Incinerator plant, there was a problem several years ago. The Dayton, OH, area trash-to-energy plant was experiencing repeated shutdowns due to sweep elbow failure in its dense phase pneumatic conveying system, a component of the lime injection system in operation there. In order to ...


    By HammerTek Corporation

  • A cut above - a sanitary rotary cutter-crusher solves a pharmaceutical product company`s size reduction problem

    A sanitary rotary cutter-crusher solves a pharmaceutical product company's size reduction problem. "We make this pharmaceutical product that ends up being big bricks of tough, brittle material", says the blending team leader of a growing pharmaceutical products company, "and we couldn't reduce it to the size it needed to be. I can't even begin ...

  • A cut above - A sanitary rotary cutter-crusher solves a pharmaceutical product company`s size reduction problem

    "We make this pharmaceutical product that ends up being big bricks of tough, brittle material", says the blending team leader of a growing pharmaceutical products company, "and we couldn't reduce it to the size it needed to be. I can't even begin to tell you how frustrating it was." The team leader is discussing the problem his company had with one of its key products, a bulk sweetener ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you