coal co-combustion Articles

  • Why Are CHP Closing All Over The World?

    Burning of coal nowadays has become a big problem. The main reason for this is a rapid increase of mankind. So, China burns half of coal in the world. Since 2000 the share of coal in world energy production has increased from 25 to 30%, and the Chinese economy is responsible for 82% of this growth. In Beijing, it is customary to use ...


    By Lumex Instruments Group

  • Ammonium, nitrate, and total nitrogen determination in fly ash

    Fly ash is a by-product of the combustion of pulverized coal and is composed of small particles. The composition of the fly ash may vary considerably, however, all fly ashes contain substantial amounts of silicon dioxide (SiO2), aluminum oxide (Al2O3) and calcium oxide (CaO). Nowadays, air pollution control standards require a separation of flue gas before being released to the atmosphere. Fly ...


    By BÜCHI Labortechnik AG

  • Optimizing Wind and Solar Power in Africa

    Editor's Note: The following is a news release authored by Julie Chao and issued by Lawrence Berkeley National Laboratory on April 5, 2017 To meet skyrocketing demand for electricity, African countries may have to triple their energy output by 2030. While hydropower and fossil fuel power plants are favored approaches in some quarters, a new assessment by the Department of Energy’s Lawrence ...


    By Smart Grid Observer

  • Remediation of Abandoned Coal Mines Using Coal Combustion Products

    A slurry of mine water and coal combustion fluidized bed ash (FBA) was injected into an abandoned coal mine in Eastern Oklahoma in July 1997. Oil-field technology was used to inject 1.8 Gg (418 tons) of FBA through five wells in 15 hours. Alkaline minerals in the FBA neutralized acidity and imparted alkalinity to the mine water. Thus, this remediation method uses the waste from an industrial ...


  • Trace elements - controlling emissions from coal combustion

    International and national legislation is increasingly being applied to trace element emissions. Although emissions have decreased for a variety of reasons in many developed countries, continued use of coal and more successful control strategies in other sectors mean that coal combustion is still a relatively important source of some trace elements, especially mercury. Existing pollution control ...


    By Inderscience Publishers

  • Coal sorption characteristics and coal surface tension

    Underground coal mining in the Bulli Seam of Sydney Basin, Australia encounters the problems of coal and gas outburst as the coal contains high concentration of CO 2 , where certain parts of the seam have been found to be especially hard-to-drain. In order to better understand these problems, the influence of temperature and moisture on sorption capacity of bituminous coal was investigated at ...


    By Inderscience Publishers

  • Is `clean` coal possible?

    VANCOUVER, April 18, 2007 (GLOBE-Net) - Coal is the world’s most commonly used fuel to produce electrical energy, and will continue as such for some time. Yet it is one of the ’dirtiest’ of all fossil fuels. It is a major source of toxic air pollutants and the leading source of energy-related greenhouse gas emissions. Many believe ’clean coal’ technologies will improve the energy efficiency of ...


    By GLOBE Foundation

  • King Coal’s Climate Challenge

    Coal is emerging as a major topic of conversation at the United Nations climate-change negotiations currently taking place in Warsaw – and rightly so. Indeed, it is a discussion that the world needs to have. The latest findings of the ...

  • Low-volatile coal combustion technologies in Vietnam: issues and strategies

    Vietnam has planned to install a number of coal-fired power plants with unit's capacity of up to 600 MW. Present experience shows that available low volatile anthracite coal is difficult to burn in the PC fired boilers. In this paper, the CFB combustion technology is proposed based on the experiences of coal-fired power plants around the world used similar coal characteristics. Later, a ...


    By Inderscience Publishers

  • Coal combustion products in Europe - sustainable raw materials for the construction industry

    The production of coal combustion products (CCPs) in all the European member states is estimated to be about 100 million tonnes. The utilisation of CCPs is well established in some European countries, based on long term experience and technical as well as environmental benefits. The CCPs are mainly utilised in the building material and construction industry as a replacement for natural resources. ...


    By Inderscience Publishers

  • Recycling of Fly Ash Produced in Combustion of Brown Coal with Increased Germanium Content

    A possibility of utilization of fly ash resulting from combustion of Czech brown coal with increased germanium content in a circulation fluidised bed combuster is examined in this study to recover germanium chloride. The laboratory measurement presented in this paper was focused on three aspects: obtaining raw germanium chloride by its direct distillation from the suspension of fly ash and HCl; ...


  • Separation of CO2 during combustion of coal in a pressurised fluidised bed

    The combustion of coal is accompanied by CO2 emissions. This carbon dioxide can be separated from the flue gases in the Combustion Chamber (CC) by means of adsorption on calcium oxide (carbonation) which in turn can be regenerated in a calcination process. A description of the processes and the integration in a whole power station that serves a district heating network and generates electricity ...


    By Inderscience Publishers

  • Coal combustion products in Europe - sustainable raw materials for the construction industry

    The production of coal combustion products (CCPs) in all the European member states is estimated to be about 100 million tonnes. The utilisation of CCPs is well established in some European countries, based on long term experience and technical as well as environmental benefits. The CCPs are mainly utilised in the building material and construction industry as a replacement for natural resources. ...


    By Inderscience Publishers

  • Low-emission coal burning technology

    Customer: Foster Wheeler Energy, Siemens, EnergoProjekt Katowice Challenge: One third of carbon dioxide emissions caused by humans come from the burning of fossil fuels in energy production. How to reduce them? Solution: Developing a circulating fluidised bed (CFB) boiler where fossil fuels are combusted with pure oxygen separated from the air. ...

  • Experience on coal reburn in a utility boiler

    Reburning is an in-furnace combustion modification technology for the reduction of NOx. By staging the introduction of the fuel, an environment is created where NOx generated by the combustion of the main fuel supply is subsequently consumed by the hydrocarbon radicals arising from the reburn fuel under reducing conditions. ENEL has retrofitted unit No. 4 of Vado ...


    By Inderscience Publishers

  • Review of coal as a promising source of lithium

    Coals are a major source of pollution in certain parts of the world due to mining, coal combustion, and disposal of fly ash. The recovery of valuable rare metals from coals or coal–processing byproducts is a promising way to utilise these traditional resources economically, efficiently and in an environmentally friendly way. Lithium, a highly interesting metal, has been found dispersed and even ...


    By Inderscience Publishers

  • Coal-to-liquid fuels poised for a comeback

    Converting coal into liquid fuels is known to be more costly than current energy technologies, both in terms of production costs and the amount of greenhouse gases the process emits. Production of coal-to-liquid fuel, or CTL, has a large carbon footprint, releasing more than twice the lifecycle greenhouse gases of conventional petroleum fuels. However, with the rise in energy prices that began ...


    By GLOBE Foundation

  • Pressurised pulverised coal combustion ? a coal-based combined-cycle state of the cooperative project: cleaned flue gas matches specifications for use with gas turbines

    A high efficiency of 60% in a combined-cycle power plant technology with fuels like gas or light oil is estimated to be achievable. On the other hand existing conventional coal-fired power plants based on steam generation have an efficiency of about 40?45%. A huge potential of improvement in efficiency could be achieved by the implementation of a simple and cost-effective technology: PPCC, a ...


    By Inderscience Publishers

  • what is Desulfurization methods of coal fired industrial boiler

    At pretest,coal is the main fuel of industrial boiler in china,sulfur in the coal nearly all transform into sulfur dioxide after combustion without desulfurization,the sulfur dioxide will cause serious environmental&n ...


  • Polish gas from Polish coal: environmental benefits

    The development of coalbed methane gas from Polish coal offers a significant opportunity to reduce noxious pollutant emissions associated with coal combustion. A review of energy supply and consumption within Poland, and of available coalbed methane resources, indicates that use of coalbed methane could eliminate 40-60 million tonnes of sulfur dioxide and particulates from the atmosphere, save ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you