coal combustion gas Articles

  • Pressurised pulverised coal combustion ? a coal-based combined-cycle state of the cooperative project: cleaned flue gas matches specifications for use with gas turbines

    A high efficiency of 60% in a combined-cycle power plant technology with fuels like gas or light oil is estimated to be achievable. On the other hand existing conventional coal-fired power plants based on steam generation have an efficiency of about 40?45%. A huge potential of improvement in efficiency could be achieved by the implementation of a simple and cost-effective technology: PPCC, a ...


    By Inderscience Publishers

  • Why Are CHP Closing All Over The World?

    Burning of coal nowadays has become a big problem. The main reason for this is a rapid increase of mankind. So, China burns half of coal in the world. Since 2000 the share of coal in world energy production has increased from 25 to 30%, and the Chinese economy is responsible for 82% of this growth. In Beijing, it is customary to use ...


    By Lumex Instruments Group

  • Ammonium, nitrate, and total nitrogen determination in fly ash

    Fly ash is a by-product of the combustion of pulverized coal and is composed of small particles. The composition of the fly ash may vary considerably, however, all fly ashes contain substantial amounts of silicon dioxide (SiO2), aluminum oxide (Al2O3) and calcium oxide (CaO). Nowadays, air pollution control standards require a separation of flue gas before being released to the atmosphere. Fly ...


    By BÜCHI Labortechnik AG

  • Coal combustion products in Europe - sustainable raw materials for the construction industry

    The production of coal combustion products (CCPs) in all the European member states is estimated to be about 100 million tonnes. The utilisation of CCPs is well established in some European countries, based on long term experience and technical as well as environmental benefits. The CCPs are mainly utilised in the building material and construction industry as a replacement for natural resources. ...


    By Inderscience Publishers

  • Coal combustion products in Europe - sustainable raw materials for the construction industry

    The production of coal combustion products (CCPs) in all the European member states is estimated to be about 100 million tonnes. The utilisation of CCPs is well established in some European countries, based on long term experience and technical as well as environmental benefits. The CCPs are mainly utilised in the building material and construction industry as a replacement for natural resources. ...


    By Inderscience Publishers

  • Polish gas from Polish coal: environmental benefits

    The development of coalbed methane gas from Polish coal offers a significant opportunity to reduce noxious pollutant emissions associated with coal combustion. A review of energy supply and consumption within Poland, and of available coalbed methane resources, indicates that use of coalbed methane could eliminate 40-60 million tonnes of sulfur dioxide and particulates from the atmosphere, save ...


    By Inderscience Publishers

  • A process for synthesising polymeric ferric sulphate using sulphur dioxide from coal combustion

    We propose a process that uses sulphur dioxide from coal combustion as a raw material to synthesise polymeric ferric sulphate (PFS), a water treatment agent. The process uses sodium chlorate as an oxidant and ferrous sulphate as an absorbent. Sodium carbonate is used as the regulator of the polymerisation process. The major chemical mechanisms in this reaction system include oxidation, ...


    By Inderscience Publishers

  • Is `clean` coal possible?

    VANCOUVER, April 18, 2007 (GLOBE-Net) - Coal is the world’s most commonly used fuel to produce electrical energy, and will continue as such for some time. Yet it is one of the ’dirtiest’ of all fossil fuels. It is a major source of toxic air pollutants and the leading source of energy-related greenhouse gas emissions. Many believe ’clean coal’ technologies will improve the energy efficiency of ...


    By GLOBE Foundation

  • King Coal’s Climate Challenge

    Coal is emerging as a major topic of conversation at the United Nations climate-change negotiations currently taking place in Warsaw – and rightly so. Indeed, it is a discussion that the world needs to have. The latest findings of the ...

  • 5th-Generation Thermox WDG Flue Gas Combustion Analyzer

    "For more than 40 years, we have been a leader in combustion gas analysis," says Mike Fuller, divison VP of sales and marketing and business development for Ametek Process Instruments, "and we believe the WDG-V is the combustion analyzer of the future." WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as ...

  • Tips for turning a coal fired boiler to gas fired boilers

    Smog has been a heated topic among the word. Therefore , gas fired boiler substitute for coal fired boiler become a trend to protect the environment.Since the boiler is a large thermal equipment ,it is requires attention to security incidents in the transformation .Here are some tip from ZG about turning a coal fired boiler to gas fired boiler. First , when turning a coal fired boiler to gas ...

  • Advances in control of PM2.5 and PM2.5 precursors generated by the combustion of pulverised coal

    Particulate matter smaller than 2.5 mm in aerodynamic diametre (PM2.5) from coal-fired boilers is composed of directly emitted (primary) particles and particles formed from precursors (secondary particles). Technologies to reduce emissions of precursors to secondary PM2.5 emitted by coal-fired utility plants include wet and dry flue gas desulphurisation (FGD). Limestone forced ...


    By Inderscience Publishers

  • AMETEK THERMOX Introduces the WDG-V Combustion Analyzer

    Abstract AMETEK THERMOX Introduces the 5th Generation THERMOX Combustion Gas Analyzer in a CONTROL Magazine Exclusive. WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as well as CO and methane levels.  Information from the Gas Analyzer allows operators to obtain the highest ...

  • Improving steam power plant efficiency through exergy analysis: effects of altering excess combustion air and stack-gas temperature

    Modifications are examined to increase coal-fired steam power plant efficiency by reducing irreversibilities in the steam generator, including decreasing the fraction of excess combustion air, and/or the stack-gas temperature. Overall-plant energy and exergy efficiencies both increase by 1.4% when the fraction of excess combustion air decreases from 0.4 to 0.15, and by 3.5% when the stack-gas ...


    By Inderscience Publishers

  • Overview of mercury control in coal-fired power plants

    During combustion, the mercury (Hg) in coal is volatilized and converted to elemental mercury (Hg0) vapor in the high temperature regions of coal-fired boilers. As the flue gas is cooled, a series of complex reactions begin to convert Hg0 to ionic mercury (Hg2+) compounds and/or Hg compounds (Hgp) that are in a solid-phase at flue gas cleaning temperatures or Hg that is adsorbed onto the surface ...

  • what is Desulfurization methods of coal fired industrial boiler

    At pretest,coal is the main fuel of industrial boiler in china,sulfur in the coal nearly all transform into sulfur dioxide after combustion without desulfurization,the sulfur dioxide will cause serious environmental&n ...


  • Flue gas Hg measurements from coal-fired boilers equipped with wet scrubbers

    The U.S. EPA has indicated they are considering additional SO2 and NOx emission reductions, and EPA is under a consent agreement to propose mercury reduction regulations by 2004 for the utility industry. The boiler manufacturers and the utility industry have developed improved combustion modification techniques to reduce NOx emissions. These advanced ...


    By Inderscience Publishers

  • A novel approach for modelling of NOx emission reduction in a tangentially fired coal boiler

    In this research paper, predictive modelling of NOx emission of a 210 MW capacity pulverised coal–fired boiler and combustion parameter optimisation to reduce NOx emission in flue gas is proposed. The effects of oxygen concentration in flue gas, coal properties, coal flow, boiler load, air distribution scheme, flue gas outlet temperature and nozzle tilt were studied. The data collected from ...


    By Inderscience Publishers

  • Present status and future prospect of clean coal technology in China

    Coal consumption accounts for about two thirds of the primary energy consumption in China. High economic growth has brought about a rapid increase of coal consumption. Low-efficiency combustion of a large amount of coal caused coal-smoke related air pollution. The Chinese government put forward plans to develop clean coal technology in the early 1990s, and has listed it as one of the emphases for ...


    By Inderscience Publishers

  • How to create qualitative fuel from water and coal: case study

    What is “coal-water fuel”?   Coal-water fuel (CWSF or CWS or CWF) is a fuel which consists of fine dispersed coal particles, water and plasticizing agent. This type of fuel is widely used as an alternative to gas and black oil on different heat generating facilities. The operational economy is the main of advantages ...


    By GlobeCore GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you