coal fines Articles

  • Hydrophobic aggregation of fine particles in high muddied coal slurry water

    The hydrophobic aggregation of fine particles in high muddied coal slurry water in the presence of four quaternary ammonium salts of 1231(dodecyl trimethyl ammonium chloride), 1431(tetradecyl trimethyl ammonium chloride), 1631(cetyl trimethyl ammonium chloride) and 1831(octadecyl trimethyl ammonium chloride) was investigated through the measurement of contact angles, zeta potentials, ...


    By IWA Publishing

  • Experimental studies on hydrophobic flocculation of coal fines in aqueous solutions and flotation of flocculated coal

    Hydrophobic flocculation of fine bituminous coal particles in aqueous solutions under mechanical conditioning and without any surfactants has been experimentally studied through the measurements of aggregative efficiency, zeta potential and contact angle in this work. The results have shown that the hydrophobic coal fines strongly aggregated in a wide pH range (3.5?9.5), even though the particle ...


    By Inderscience Publishers

  • Coal Powder Plant

     Coal Crushing Plant,Coal Powder Plant,Coal Grinding Process The feeders load the ROM coal onto a reclaim ...


  • Cleaning of Dukki (Baluchistan) coal by oil agglomeration process

    Cleaning of coal fines by oil agglomeration is an efficient technique by which an appreciable recovery of combustible matter and significant reduction in ash forming minerals are possible. In this study, oil agglomeration process has been employed to clean indigenous coal under the influence of parameters such as oil type, particle size and the pH value of aqueous medium. As agglomerant, castor ...


    By Inderscience Publishers

  • Coal Mining and Production Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • A Neural Model for SPM Concentration Prediction in Coal Mines

    ABSTRACT Coal mines are the major sources of suspended particulate matter. To implement any control techniques or to install any control equipment around the coal mines, ambient concentration of suspended particulate matter should be known. In this paper a model is developed to find the concentration of suspended particulate matter at various locations away from the source. The model is ...


  • MSHA: What’s the Real Impact of Fines on Mine Safety?

    Late in 2014, MSHA made headlines when an investigation revealed that nearly $70 million in health and safety penalties had yet to be paid by mining company owners. The joint investigation by news agency NPR and Mine Safety and Health News found that most of these unpaid penalties were ...


    By Intelex Technologies Inc.

  • How to create qualitative fuel from water and coal: case study

    What is “coal-water fuel”?   Coal-water fuel (CWSF or CWS or CWF) is a fuel which consists of fine dispersed coal particles, water and plasticizing agent. This type of fuel is widely used as an alternative to gas and black oil on different heat generating facilities. The operational economy is the main of advantages ...


    By GlobeCore GmbH

  • Studies on coal flotation in flotation column using statistical technique

    Flotation of Indian high ash coking coal fines to obtain clean coal has been reported earlier by many authors. Here an attempt has been made to systematically analyse factors influencing the flotation process using statistical design of experiments technique. Studies carried out in a 100 mm diameter column using factorial design to establish weightage of factors such as feed rate, air rate and ...


    By Inderscience Publishers

  • Rotomite 6000 dredge system - centennial coal-case study

    Centennial Coal's Mannering Colliery mine averages over 1M tons of coal per year when operating at full capacity. The mine's run-off ponds' sludge issues prompted Centennial to contact Dredging Solutions, SRS Crisafulli's Dealer in Australasia, and an experienced dredging contractor.  Dredging solutions deployed the Crisafulli Rotomite 6000 auger suction dredge system because of the ...


    By SRS Crisafulli, Inc.

  • Migration and transformation characteristics of DOM in fine sand and marl rock

    This paper mainly studied migration and transformation characteristics of dissolved organic matter (DOM) in underground aquifers. To achieve the research purpose, we carried out the dynamic column experiments of the DOM at different conditions indoors. In the experiment, the water of Wujiang River from Pingdingshan Coal-field is used as water sample, meanwhile, fine sand and marl rock are used ...


    By IWA Publishing

  • Difficult Complex Decisions For Coal-fired Power Plant Operators

    Changing fuel prices, government regulations and technology all combine to make decision making difficult for operators and developers of coal-fired power generation facilities around the world. Power plant designers in developing countries face new local environmental regulations plus additional requirements stipulated by lenders such as the World Bank. In the developed world, the regulations ...


    By The McIlvaine Company

  • Prepare now for the carbon tax bill or face hefty fines

    To avoid massive financial penalties, South Africa-based industries need to immediately prepare for the implementation of the Carbon Tax Bill, warns Roger Rusch, CEO of IWC (Industrial Water Cooling). In November 2015, the National Treasury published the Draft Carbon Tax Bill for public comment. Once implemented, the Bill will penalise companies with excessive Green House Gas (GHG) ...

  • Implications for UK coal-fired power stations of a move to a particulate matter standard based on PM2.5

    The contribution of UK coal-fired power stations to ambient PM2.5 concentrations has been assessed using short- and long-range modelling. The results suggested a minimal contribution from power stations to both local and regional concentrations of PM2.5 relative to the standards in the proposed European ...


    By Inderscience Publishers

  • The Variety Kinds of Fote Briquette Machine

    To make our life more convenient and efficient, Fote Machinery produces many machines to meet the satisfactory of people. For example, Fote briquette machine which is widely used in coal, chemical. And there are many kinds of briquette machine, such as coal ball press machine, coal briquette press machine, dry ...


    By Fote Machinery

  • CaO–LOI classification system for cement kiln dust

    Cement Kiln Dust (CKD), a residual of cement production, has been used effectively as a cement replacement, but there is a lack of guidance for its appropriate selection and performance in specific engineering applications. Since CKD is not a controlled product, the chemical composition and material properties differ from source to source like coal fly ash. This paper presents a dual–letter ...


    By Inderscience Publishers

  • PM10 and PM2.5 - legislation, measurement and control

    New standards for PM10 and PM2.5 in ambient air are being formulated in Europe and the USA. There is much controversy over this legislation, not only with respect to the stringent limits proposed, but also due to the many problems associated with ensuring compliance with standards for a pollutant which is so poorly understood. New sampling and analysis techniques ...


    By Inderscience Publishers

  • Traffic emission effects on ambient air pollution by PM2.5–related PAH in Upper Silesia, Poland

    The ambient concentration of particle–bound polycyclic aromatic hydrocarbons (PAHs) was investigated in two industrial towns in Upper Silesia, Poland. The 24 h samples of PM2.5 (particles with aerodynamic diameter ≤ 2.5 µm) were collected simultaneously at busy roads (or crossroads) and at an urban background site. Additionally, the samples were collected during the heaviest traffic density (rush ...


    By Inderscience Publishers

  • Pneumatic powder injection technique as a tool for waste utilisation

    The problem of wastes in metallurgical and foundry industries is very important. The considerable amount of wastes is furnace dusts and other fine materials. At the Department of Foundry, the experiments with the use of pneumatic injection method were carried out to utilise these materials. The results of dusts injection into cupola, slag foaming with the use of powdered coal-furnace dusts ...


    By Inderscience Publishers

  • Laser Engineering // The Valuable Technology

    In this seminar we will introduce the Laser engineering as the valuable and modern technology, which can be implemented within the various commercial fields: such as the civil, mechanical, gas & petroleum, chemical, communication, weather inspector, and arms as well as for the arts and medical treatments. The Laser promotion was due to its high velocity, accuracy of sub-micron space, and fine ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you