coal fire detection Articles

  • Relative Accuracy Testing of an X-Ray Fluorescence-Based Mercury Monitor at Coal-Fired Boilers

    ABSTRACT The relative accuracy (RA) of a newly developed mercury continuous emissions monitor, based on X-ray fluorescence, was determined by comparing analysis results at coal-fired plants with two certified reference methods (American Society for Testing and Materials [ASTM] Method D6784-02 and U.S. Environment Protection Agency [EPA] Method 29). During the first determination, the ...


    By Cooper Environmental

  • The determination of total mercury in fish and agricultural plant materials using thermal decomposition and amalgamation coupled with atomic absorption

    Mercury has long been recognized as a serious global pollutant that has a significant impact upon our ecosystem. Unlike most other pollutants, it is highly mobile, non-biodegradable, and bio-accumulative and as a result has to be closely monitored to ensure its harmful effects on local populations are minimized. Approximately 50 tons of mercury particulates are emitted into the atmosphere every ...


    By PerkinElmer, Inc.

  • EPA Proposed “Franken-MACT” for Utilities

    EPA published the highly anticipated proposed Maximum Available Control Technology (MACT) Standard for the utility sector (40 CFR 63 Subpart UUUUU). When considered together with the growing list of proposed and final rules impacting the utility sector (Transport Rule/Cross-State Rule, Coal Combustion Byproducts Rule, Cooling Water Intake Rule, Regional Haze Rule, revised National Ambient Air ...


    By Trinity Consultants

  • The determination of total mercury in soils and river sediments using thermal decomposition and amalgamation coupled with atomic absorption

    Mercury has long been recognized as a serious global pollutant that has a significant impact upon our ecosystem. Unlike most other pollutants, it is highly mobile, non-biodegradable, and bio-accumulative and as a result has to be closely monitored to ensure its harmful effects on local populations are minimized. Approximately 50 tons of mercury particulates are emitted into the atmosphere every ...


    By PerkinElmer, Inc.

  • The determination of total mercury in whole blood using thermal decomposition and amalgamation coupled with atomic absorption

    Mercury has long been recognized as a serious global pollutant that has a significant impact upon our ecosystem. Unlike most other pollutants, it is highly mobile, nonbiodegradable, and bio-accumulative and as a result has to be closely monitored to ensure its harmful effects on local populations are minimized. Approximately 50 tons of mercury particulates are emitted into the atmosphere every ...


    By PerkinElmer, Inc.

  • CEMS: An Overview

    We've written an overview to where CEMS are required, types of site that require CEMS and future requirements. Continuous Emissions Monitoring Systems are used to continuously collect, record and report data from industrial process operators that produce emissions to air. CEMS are used as a means to comply with ...


    By a1-cbiss

  • GE Leakwise Application Notes: Oil Leaks at Power Generation Plants

    Fossil Fuel Power Generation Fuel fired power generation plants have several oil storage tanks for feeding fuel to the power units. Coal or gas fired power generation plants also have oil storage tanks to be used for start-up or as a back-up energy source. All ...


    By GE Analytical Instruments

  • Intraurban variability of Ambient PM Arsenic and other air toxics metals case study

    The Missouri Department of Natural Resources (MoDNR) and Washington University participated in a project to collect and analyze air toxics metals data. It was funded through a Community Air Toxics Grant from the U.S. Environmental Protection Agency (USEPA). The study grew out of the southside St. Louis Community Air Project (CAP) which identified six hazardous air pollutants of concern including ...


    By Cooper Environmental

  • Carbon Monoxide (CO) and Carbon Dioxide (CO2) Safety

    Know the Gases, Know the Dangers and Protect Yourself Do you know the differences between carbon monoxide (CO) and carbon dioxide (CO2)? If you don’t then there are no guarantees your safety measures will be adequate. These two different gases are often mixed up with people becoming confused over which they need to protect against, when and how. ...


    By SHEilds Ltd

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • Proposed boiler MACT sets aggressive emission limits

    On June 4, 2010, U.S. EPA proposed National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions.  EPA proposed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater ...


    By Trinity Consultants

  • Innovative emissions monitoring uptake soars

    Firms in the UK’s waste and power sectors are proactively seeking Best Available Techniques for emissions monitoring, according to Enviro Technology. Over recent months there has been a surge in demand for sophisticated equipment, such as monitors of total gaseous mercury. The air quality and emissions monitoring specialist believes that a combination of factors, such as the recast ...

  • EPA finalizes boiler NESHAP

    EPA published the final National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions. EPA developed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater than 25 tpy of ...


    By Trinity Consultants

  • Water Sustainability

    I7.1  | Water Optimization – 30% Groundwater Use Reduction Tabatha Pellerin, Senior Program Manager, AECOM AECOM assisted the Entergy Lewis Creek gas/coal fired electric power plant with water conservation efforts prompted by a goal of 30% ...

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • A civilizational tipping point

    In recent years there has been a growing concern over thresholds or tipping points in nature. For example, scientists worry about when the shrinking population of an endangered species will fall to a point from which it cannot recover. Marine biologists are concerned about the point where overfishing will trigger the collapse of a fishery. We know there were social tipping points in earlier ...


    By Earth Policy Institute

  • The Gasmet story from an academic idea to a global business

    In this article, Dr Petri Jaakkola, founder and Chairman of Gasmet Technologies Oy explains how an idea shared by a group of researchers at the University of Oulu in Finland, during the early 1970s, developed into one of the world’s leading gas monitoring instrumentation manufacturers. Early history – technology development At first, the Finnish researchers understood ...


    By Gasmet Technologies Oy

  • How did palm oil become such a problem — and what can we do about it?

    Production of this ubiquitous ingredient is devastating for the environment. Solutions are complex, but they are out there. Last August, from the window of a jet high over Sumatra, I counted nearly a dozen plumes of smoke rising from the vast jungles and plantations below. Some more than a half-mile wide, they looked like pillars holding up the sky. That week the ...


    By Ensia

  • Cost Containment: Beyond the Obvious

    Utilities today can implement a number of different initiatives to help them contain costs and maximize profits. Some of those, such as switching to a more efficient fuel source if possible, can produce obvious results that are relatively easy to calculate. But there are other initiatives, though less obvious, that can produce significant results at the bottom line. One such cost-containment ...

  • Greening the Built Environment

    ASTM Standards and Products Form the Foundation of Sustainable Construction Efforts Today, a major focal point for the worldwide building industry is the growing demand for sustainable construction. Sustainable, or “green,” construction is focused on the more effective use of resources and ultimately the creation of healthier, energy efficient, more environmentally ...


    By ASTM International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you