coalescing filter Articles

  • Series TJ Coalescence-separation Oil Purifier

    Series TJ Coalescence-separation oil purifier adopts advanced polymer fiber as the filter medium combined with the special oil-water separating device to make TJ is good at breaking emulsion and filtering. It can effectively separate water from oil. Series TJ can work online with turbine system for breaking emulsion and filtering, also it can separate particles and mass water from light oil. ...


    By rier oilpurifier company

  • Research on the treatment of oily wastewater by coalescence technology

    Recently, oily wastewater treatment has become a hot research topic across the world. Among the common methods for oily wastewater treatment, coalescence is one of the most promising technologies because of its high efficiency, easy operation, smaller land coverage, and lower investment and operational costs. In this research, a new type of ceramic filter material was chosen to investigate the ...


    By IWA Publishing

  • Expanding Reservoir Air Filters

    In all vented tanks, the rise and fall of fluid levels is offset by a corresponding volume of incoming and outgoing air. Keeping the incoming replacement air clean is essential for contamination control and thus the reliability of hydraulic systems. While targeting the system's reliability, JLM Systems Limited has developed the OilMiser™ Reservoir Aspirator (ORA) kit. This product represents a ...


    By JLM Systems Ltd

  • American Upstart Filter Brand Competing with the Majors

    Flexotherm® has expanded its product line in the highly competitive filtration market.  The company now offers 2,900 different filter elements including coalescers, particulate, adsorbers, general purpose and high temperature filters. ...


    By Neptech Inc.

  • A novel application of modified bamboo charcoal to treat oil-containing wastewater and its modified mechanism

    Three conventional coalescence filters including walnut shells (WS), polystyrene resin particles (PR), and quartz sand (QS) were compared with bamboo charcoal (BC) to treat oily wastewater in a coalescence system process. The results showed the order of oil removal efficiency was QS>BC>WS>PR. To improve the oil removal efficiency of BC further, six types of modified BC were ...


    By IWA Publishing

  • Groundwater pump & treat and SIPEX skimmimg system

    GRS has supplied and installed a system for the abstraction of free-phase floating creosote contamination. The system comprises frequency controlled submersible pumps for precise hydraulic control and our motorised interface tracking system which, due to large local water table fluctuations, was modified to provide a product/water interface tracking range of 5m.Abstracted groundwater is pumped to ...


  • HS-200 Used in natural gas production

    A unique and proven wastewater treatment system is being used at several natural gas compressor stations. Oil leakage and spills when servicing compressors together with maintenance wash-down water, are being satisfactorily treated with oil removal systems. The systems usually consist of a wastewater holding tank with an oil drain off valve, a coalescing oil/water separator ...


    By Hydrosil International

  • 2005 Benchmark Survey of Corporate Sustainability Reporting in Canada

    Gravimetric and chemical treatment with land-farm application discharge had significant design shortcomings during routine process upsets, becoming under-sized as production increased, or as heavy rainfall resulted in uncontrolled storm runoff of the wastewater. API O/W/S technology certainly can’t be expected to be deployed effectively for remote oil and gas fields or offshore sites produced ...


    By Stratos Inc.

  • Los Angeles County Sanitation Districts: Siloxane Removal

    Los Angeles County Sanitation Districts have long been involved with recovering landfill and digester gas for energy to power turbines and internal combustion engines. Their experience led them to identify performance issues associated with these gases. One particular challenge is siloxanes. Cyclic organic silicon monomers (siloxanes) used in the manufacture of personal hygiene, health care and ...


    By Pioneer Air Systems

  • Oil Water Separator Maintenance

    Oil water separators (OWS) can be co$tly to maintain, $20,000 or more on average per cleaning and if not properly managed, can be very expensive conduits of pollution. Have you taken steps to minimize the effects and consequences on your operating co$t? When was your facility’s last OWS maintenance ...

  • Industrial container recycling simplified by oil skimmer

    Barrel Reconditioning Industries (BRI) of Cottage Grove, MN builds recycling systems for both metal and plastic containers, including lubricating fluid drums and barrels. A typical BRI system consists of several integrated machines or stations, including a solvent preflush and a high pressure water wash. The water wash presents two distinct problems. First, oil and grease contaminated wash water ...


    By Abanaki Corporation

  • OM-1 Oil Mist Eliminators Collect Coolant Mists, Lubricant Mists, Smoke

    A major midwest metalworking facility uses 24 OM-1 Mist Eliminators to collect oil mists from over 200 sources, including grinding, dressing, CNC machining, lathes and heat treating operations.  OM-1's ability to accommodate smoke gives it an advantage over centrifugal-type oil mist collectors, which are not usable for smoke. Both soluble and non-soluble oils are used;  OM-1 collects ...


    By Tri-Mer Corporation

  • Emulsion breakingtechniques for oil in water solvent extractions

    Certain types of samples, such as those containing detergent, may form emulsions when doing an oil in water extraction into a solvent. The boundary between the solvent and the sample will have an emulsion layer that lias a cloudy or milky appearance as shown in tlris photo. According to U.S. EPA Method 1664, "if the emulsion is greater than one-third the volume of the solvent layer. Hie ...


    By Spectro Scientific

  • Monroe`s Multi Stage Oil Mist Collector solves synthetic fiber plant`s oil mist problems

    Challenge A synthetic fiber plant's manufacturing operations produced a large amount of oil mist. The oil mist consisted of heavy oil droplets, smoke, and sub-micron vapors. The manufacturer required the air to be cleaned of the oil mist and other pollutants before discharge into the atmosphere. Solution The plant examined various types of oil mist ...

  • Choosing the right oil skimmer for economical fluid management

    Oil skimmers are simple, dependable and effective tools for removing oil, grease and other hydrocarbuns from water. Although designs var’, ah oil skimmers rely on the fluid properties of specific gravity and surface tension. Most use a moving medium tu remove floating oil from the fluid’s surface, as shown jo Figure 1 (The exception is a floating suction skimmer.) Floating oil and grease cling tu ...


    By Abanaki Corporation

  • Treatment of Oily-Waste Process Streams

    Standard oily-wastewater remediation relies on API 650 for oily-wastewater separation (O/W/S) treatment using gravimetric lagoon separation, then reprocessing the recovered floatable slop oil, followed by chemical flocculation, then reprocessing the recovered oily sludge, followed by dissolved air flotation (DAF), then using holdingpond clarification of supernatant wastewater, before ...


  • Water contamination in fuel: cause and effect

    Water exists in three physical states and depending on the surrounding conditions it finds its way to the fuel systems like the high pressure common rail (HPCR) fuel systems on diesel engines. The important point thereafter is to provide the best possible on-engine protection by securing the fuel injector systems from severe damage. As the environmental challenges and emission regulations become ...

  • Emulsion-Breaking Techniques for Accurate Oil in Water Measurements

    A White Paper discusses emulsion-breaking techniques for ensuring accurate oil in water measurements. Certain water samples, such as those containing detergent, may form an emulsion when oil in water extraction into a solvent is done. In order to ensure an accurate measurement, the emulsion must be broken. Six techniques are described that can be used for reducing an emulsion ...


    By Spectro Scientific

  • Breathe easy: The importance of emission reduction and energy efficiency

    Breathe easy Blue oil mist is an unwelcome by-product of industrial work in the energy sector. contec specialises in high-powered, energy efficient and environmentally friendly oil mist filtration systems that reduce health risks and are an inexpensive alternative to traditional exhaust piping. The high concentrations of blue oil mist produced by industrial ...

  • Maintaining fuel quality in a stored environment

    What do all of these true stories have in common? Poor fuel quality. In all of these cases, poor fuel quality shutdown emergency standby power generators exactly when they were being counted on in the middle of adisaster. And the number of hurricanes, wildfires, blackouts, floods, earthquakes and the like in recent yearshas added significantly to the lore, though most are closely guarded stories ...


    By AXI International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you