coalescing medias Articles

  • Oil-Water Separator with New Coalescing Media Handles High Load Stormwater at HydroElectric Powerplant to Yield Zero Oil Discharge

    Background Removal of oil from water before the water is discharged into a river or other body of water is an important environmental goal. In order to accomplish this, a major hydropower producer in the southern United States contracted with HydroQuip, Inc.* for the supply of a state of the art oil/water separator. The power plant had several goals, but the most important was that in ...


    By Lantec Products, Inc.

  • HS-200 Used in natural gas production

    A unique and proven wastewater treatment system is being used at several natural gas compressor stations. Oil leakage and spills when servicing compressors together with maintenance wash-down water, are being satisfactorily treated with oil removal systems. The systems usually consist of a wastewater holding tank with an oil drain off valve, a coalescing oil/water separator ...


    By Hydrosil International

  • Choosing the right oil skimmer for economical fluid management

    Oil skimmers are simple, dependable and effective tools for removing oil, grease and other hydrocarbuns from water. Although designs var’, ah oil skimmers rely on the fluid properties of specific gravity and surface tension. Most use a moving medium tu remove floating oil from the fluid’s surface, as shown jo Figure 1 (The exception is a floating suction skimmer.) Floating oil and grease cling tu ...


    By Abanaki Corporation

  • The Prediction of Fracture Fatigue Parameters from Creep Testing of Soil Cement

    When a cement-treated base layer is subjected to repeated stress, inherent microcracks begin to propagate and coalesce from the bottom of the layer and finally cause the layer to fail. In order to identify the rate of fatigue failure of the cement-stabilized base layer, Paris´ law, da/dN = A(?Kmax)n, can be used.In this research, the parameters, A and n, were predicted by a viscoelastic approach. ...


    By ASTM International

  • Los Angeles County Sanitation Districts: Siloxane Removal

    Los Angeles County Sanitation Districts have long been involved with recovering landfill and digester gas for energy to power turbines and internal combustion engines. Their experience led them to identify performance issues associated with these gases. One particular challenge is siloxanes. Cyclic organic silicon monomers (siloxanes) used in the manufacture of personal hygiene, health care and ...


    By Pioneer Air Systems

  • A clean sweep

    When properly selected and applied, oil skimmers are a highly economical solution for sepaeating oil from water to allow its reuse or safe disposal. How Oil SkimmersWorkOil skimmees are simple, dependable and effective tonis for removing oil, grease and otherhydroearbono from water and can pay for themselveo within a few months.  Ah oil skimmers rely on the fluid properties of specific ...


    By Abanaki Corporation

  • Monroe`s Multi Stage Oil Mist Collector solves synthetic fiber plant`s oil mist problems

    Challenge A synthetic fiber plant's manufacturing operations produced a large amount of oil mist. The oil mist consisted of heavy oil droplets, smoke, and sub-micron vapors. The manufacturer required the air to be cleaned of the oil mist and other pollutants before discharge into the atmosphere. Solution The plant examined various types of oil mist ...

  • OM-1 Oil Mist Eliminators Collect Coolant Mists, Lubricant Mists, Smoke

    A major midwest metalworking facility uses 24 OM-1 Mist Eliminators to collect oil mists from over 200 sources, including grinding, dressing, CNC machining, lathes and heat treating operations.  OM-1's ability to accommodate smoke gives it an advantage over centrifugal-type oil mist collectors, which are not usable for smoke. Both soluble and non-soluble oils are used;  OM-1 collects ...


    By Tri-Mer Corporation

  • Water contamination in fuel: cause and effect

    Water exists in three physical states and depending on the surrounding conditions it finds its way to the fuel systems like the high pressure common rail (HPCR) fuel systems on diesel engines. The important point thereafter is to provide the best possible on-engine protection by securing the fuel injector systems from severe damage. As the environmental challenges and emission regulations become ...

  • Expanding Reservoir Air Filters

    In all vented tanks, the rise and fall of fluid levels is offset by a corresponding volume of incoming and outgoing air. Keeping the incoming replacement air clean is essential for contamination control and thus the reliability of hydraulic systems. While targeting the system's reliability, JLM Systems Limited has developed the OilMiser™ Reservoir Aspirator (ORA) kit. This product represents a ...


    By JLM Systems Ltd

  • Custom-designed belt skimmer meets unique needs of large international automaker

    Graham Smith, a sales engineer for the UK division of Abanaki Corporation, Oil Skimmer Division, headquartered in Chagrin Falls, OH, was called upon by a large Japanese automaker with operations in Europe to solve a unique problem—retrieving automotive wax and reclaiming water at the end of an extremely busy production line. The engineer discovered a unique situation. At the end of the ...


    By Abanaki Corporation

  • Skimming Oily Wastewater

    As large generators of oily wastewater tighten effluent controls, the U.S. Environmental Protection Agency (EPA) is targeting smaller generators. Some of the firms receiving their attention are smaller manufacturing plants, automotive garages, mobile equipment service shops and truck farms. Many of these firms do not have access to a sanitary sewer system that will accept oily wastewater. Because ...


    By Abanaki Corporation

  • Small Capacity Sulfur Recovery Units

    Documento sin título ...


    By Merichem Company

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you