coalescing oil-water separator Articles

  • Series TJ Coalescence-separation Oil Purifier

    Series TJ Coalescence-separation oil purifier adopts advanced polymer fiber as the filter medium combined with the special oil-water separating device to make TJ is good at breaking emulsion and filtering. It can effectively separate water from oil. Series TJ can work online with turbine system for breaking emulsion and filtering, also it can separate particles and mass water from light oil. ...


    By rier oilpurifier company

  • Oil-Water Separator with New Coalescing Media Handles High Load Stormwater at HydroElectric Powerplant to Yield Zero Oil Discharge

    Background Removal of oil from water before the water is discharged into a river or other body of water is an important environmental goal. In order to accomplish this, a major hydropower producer in the southern United States contracted with HydroQuip, Inc.* for the supply of a state of the art oil/water separator. The power plant had several goals, but the most important was that in ...


    By Lantec Products, Inc.

  • Oil Water Separator Maintenance

    Oil water separators (OWS) can be co$tly to maintain, $20,000 or more on average per cleaning and if not properly managed, can be very expensive conduits of pollution. Have you taken steps to minimize the effects and consequences on your operating co$t? When was your facility’s last OWS maintenance ...

  • Kimre Inc. LIQUI-NOMIX oil-water separators

    Liquid - liquid mixtures of contaminant oils (or organic solvents) in water (or aqueous solvents) can be separated economically and efficiently with gravity settlers or decanters. To achieve high efficiency separations, the settling unit must include a coalescing stage for removal of small droplets of oil. Kimre Inc.'s LIQUI-NOMIX coalescers provide high efficiency polishing of liquid streams and ...


    By Kimre, Inc.

  • Freytech oil water separators in car wash applications

    Knowing that oil can get into the reclaim water, David F. Roberts, the President of Freytech Inc., recommends the use of an enhanced coalescing oil water separator. “Even trace amounts of oil in the recycled water can diminish the quality of the wash,” he said. “An ‘oil trap’ is not enough since it is simply a tank with baffled walls which does trap some of the oil ...


    By Freytech Inc.

  • Coalescence and Size Distribution Characteristics of Oil Droplets Attached on Flocs After Coagulation

    Abstract  The coalescence characteristics of oil droplets which are attached on flocs after coagulation is different from coalescence of droplets which are suspended in emulsions. The droplets attached on flocs are stationary and do not collide as those in emulsions. Objectives of this study were to investigate the change in size distribution of oil droplets that were attached on flocs ...


  • Oil Skimmer makes oil/water separator more efficient

    Industrial facilities depend on oil/water separators to separate oil from its waste water. While oil/water separators are a helpful component to a plant's wastewater system, oil/water separators traditionally do not provide an efficient method of removing oil once it has been separated from the waste stream. Traditionally, the separator industry has either used overflow skimmer pipes or weirs, or ...


    By Oil Skimmers, Inc.

  • Oil droplets and solid particles removal using circular separator with inclined coalescence mediums: comparison between co-current and counter-current flow

    This research investigated the effects of co- and counter-current flow patterns on oil-water-solid separation efficiencies of a circular separator with inclined coalescence mediums. Oil-water-solid separations were tested at different influent concentrations and flowrates. Removal efficiencies increased as influent flowrate decreased, and their correlationship can be represented by power ...


    By IWA Publishing

  • Oil/water separator and oil skimmer companies work together to help power generation facilities

    Power generation facilities depend on oil/water separators to separate oil from its waste water. While oil/water separators are a helpful component to a plant’s wastewater system, oil/water separators traditionally do not provide an efficient method of removing oil once it has been separated from the waste stream. Knowing what his customers were faced with, Dave Goding, president, Mercer ...


    By Oil Skimmers, Inc.

  • Oil Water Separator - Klargester has a specialist team who provide technical assistance in selecting the appropriate Separator for your application

    Klargester Separators - EN858 compliant, with full Environment Agency Approval (PPG3) To specify a nominal size Klargester Bypass Separator, the following information is needed:- The calculated flow rate (NS) or the drainage area served. Our designs are based on the assumption that any interconnecting pipework fitted elsewhere on site does not impede flow into or out of the separator ...


    By Kingspan Environmental Ltd

  • The Power to Separate

    Gravity separators are effective and economical tools used to process wastewater and stormwater by removing pollutants such as sediment, hydrocarbons and debris through the process of sedimentation or flotation. Most separators have few or no moving parts, are easy to maintain and have a successful history of use in many different industrial, commercial and residential applications. Specifying ...


    By BaySaver Technologies, Inc.

  • Highland Tank 50,000 Gallon Oil/Water Separator installed at Con Ed Mott Haven Power Distribution Center

    Before the Brooklyn Bridge spanned the East River, before the Statue of Liberty first graced New York Harbor, and before skyscrapers rose above New York City's streets, the utility companies that would eventually become Con Edison were already building the energy infrastructure needed to fuel and sustain the city's growth. Today, Con Edison operates one of the largest and most complex — yet ...

  • Emulsion breakingtechniques for oil in water solvent extractions

    Certain types of samples, such as those containing detergent, may form emulsions when doing an oil in water extraction into a solvent. The boundary between the solvent and the sample will have an emulsion layer that lias a cloudy or milky appearance as shown in tlris photo. According to U.S. EPA Method 1664, "if the emulsion is greater than one-third the volume of the solvent layer. Hie ...


    By Spectro Scientific

  • Emulsion-Breaking Techniques for Accurate Oil in Water Measurements

    A White Paper discusses emulsion-breaking techniques for ensuring accurate oil in water measurements. Certain water samples, such as those containing detergent, may form an emulsion when oil in water extraction into a solvent is done. In order to ensure an accurate measurement, the emulsion must be broken. Six techniques are described that can be used for reducing an emulsion ...


    By Spectro Scientific

  • Oil Emulsion and cleaning parts wastewater

    Customer The company is the only car manufacturer in Slovakia producing engines. In the Slovak facility, they produce gasoline engines by five production lines, four metal cutting lines and one assembly line. Customer needs Disposal of huge not dischargeable oily waste water is one important issue that the company has set out to exploit. The goal ...

  • The Challenge of Removing Surface (free-floating) Oil

    Imagine tackling your greatest production challenge quickly, easily and inexpensively. Now imagine tackling your greatest production challenge quickly, easily and inexpensively – and even generating a profit while doing so. For businesses and industries that deal with oil separation and removal, the solution does not need to be expensive or inefficient. In fact, the answer may be simpler ...


    By Oil Skimmers, Inc.

  • Starndard Batch Treatment of Free and Soluble Oil Wastewater

    Small and Medium metal-based manufacturing plants produce between 1,000 and 30,000 gallons per week of oil-laden wastewater. Typically, the oil load is less then 2,000mg/l as soluble oil. Free (globular) oil is typically removed by DAF, oil-water separator, or coalescer with the remaining soluble oil needing to be reduced to less then 100mg/l in order to discharge directly to the local sewerage ...


  • Improving energy efficiency: About oil fouling in refrigeration systems

    Introduction Most air conditioning and refrigeration systems have a mechanical compressor which relies upon lubricating oil to function. During the normal course of the refrigeration process, ½% to 8% of the compressor’s lubricating oil is circulated throughout the system along with the refrigerant. Since the early days of refrigeration and air conditioning technology, the ...


    By Power Knot LLC

  • The Mercer Advantage revealed: it`s what`s inside that matters

    The coalescing oil water separator market is littered with cheap underperforming options that cause nightmares for EHS and maintenance departments.  This video reviews the different styles of coalescers available today, and walks through what the insides will look like once your OWS is in operation. Technologies Reviewed: API Separators Plate Packs in API ...


    By Mercer International Inc.

  • Water contamination in fuel: cause and effect

    Water exists in three physical states and depending on the surrounding conditions it finds its way to the fuel systems like the high pressure common rail (HPCR) fuel systems on diesel engines. The important point thereafter is to provide the best possible on-engine protection by securing the fuel injector systems from severe damage. As the environmental challenges and emission regulations become ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you