combustible gas Articles

  • Low emission combustion of landfill gas

    Type     HOFGAS®- Efficiency 2000 (3x) Commissioning     July 2002 Site     Ämmäsuo Landfill (Espoo, FI)  SituationÄmmässuo landfill is located in Espoo, about 20 km from Helsinki. The landfill is the largest one in Finland and one of Europe’s largest. In order to reduce the greenhouse gas emissions and eliminate ...


    By Hofstetter BV

  • High temperature combustion of landfill gas

    Type     Compact plant HOFGAS® - Efficiency 250 Commissioning     December 2001 Site     Storkohmo landfill, Kokkola (FIN) Situation Storkohmo landfill is located 400km north of Helsinki on Finland's west coast near the city of Kokkola. Based on local legislation requirements ( reduction of green house gas emissions ) the ...


    By Hofstetter BV

  • Why high temperature combustion of landfill gas?

    Due to the accumulation of knowledge and the tightening of environmental law, the landfill technology has increasingly become concerned with the management of trace compounds in landfill gas. With landfill gas, contamination is through sulphur, chlorine, fluorine, halogenated hydrocarbons and heavy metals. Other trace elements such as volatile organic compounds (VOC), impose environmental ...


    By Hofstetter BV

  • The landfill gas collection, utilisation and surplus gas combustion acting in unison

    In landfill gas utilisation the basic task of the control system is to harmonise three completely independent processes. On the one hand, there is the gas production of the landfill which is inconstant. (From a price point of view, hardly worthwhile to store the gas in a gasometer) On the other side the independent gas utilisation process, which orientates itself to the requirement of the ...


    By Hofstetter BV

  • The Goldilocks of Combustion Solutions

    It’s not too big, it’s not too small… It’s just right! We hear it all the time from our customers: “The ABUTEC 200 is too small for our site, but the HTF is too large. Can you create a custom unit?” The answer sometimes surprises those customers. While yes, we can certainly develop a custom unit just for your site, a more efficient (and cost-effective) ...


  • Low emission combustion of Oilgas

    Type     HOFGAS®- IFM4c/2300/150 Commissioning     June 2001 Site     Cistierna (ES) Situation Enervisa SA in Cistierna own a plant for the recycling of old oils. The oil is evaporated and condensed into high-grade fuel. The reclaimed fuel is used in diesel engines for production of electricity as well as in burners for the ...


    By Hofstetter BV

  • Paint booths, or areas using combustible gases: why a requirement for combustible gas monitor might be necessary

    Paint booths save time and ensure a smooth and professional application of paint in a range of industries, including automotive, aerospace, home decor, furniture, and more. Combustible gases and fluids in the paint booth environment can pose a health hazard if something goes wrong. Explore the hidden dangers of paint booth fluids and gases, and learn how a ...

  • Environmentally safe combustion of corrosive solvents

    Type     HOFGAS®- IFM4c/350/100 Commissioning     2002 Site     EMS DOTTIKON (Dottikon, CH) Situation By September 2002 EMS Dottikon AG had started the operation of the new production plant for pharmaceutical substances. As a result of the drying process 0..100Nm³/h off-gas is expelled batch wise. The main compound is ...


    By Hofstetter BV

  • 5th-Generation Thermox WDG Flue Gas Combustion Analyzer

    "For more than 40 years, we have been a leader in combustion gas analysis," says Mike Fuller, divison VP of sales and marketing and business development for Ametek Process Instruments, "and we believe the WDG-V is the combustion analyzer of the future." WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as ...

  • Combustion Of Heavy Fuels And Liquid Wastes

    This paper describes the design and operating conditions of liquid and gas combustors for heavy fuels and liquid wastes. Lower fuel prices can be achieved by switching from light oil to heavy ones, or combining with unconventional waste fuels. Unconventional waste fuels such as energetic off gases and organic liquid waste require especially designed combustion equipment like a special combustor ...

  • Optimizing VOC Combustion - Case Study

    Volatile Organic Compounds (VOCs) are pre-cursors to Ozone pollution and subject to EPA regulations. Thermal and catalytic oxidizers are routinely used to destroy VOC emissions from a variety of industrial sources. ...

  • AMETEK THERMOX Introduces the WDG-V Combustion Analyzer

    Abstract AMETEK THERMOX Introduces the 5th Generation THERMOX Combustion Gas Analyzer in a CONTROL Magazine Exclusive. WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as well as CO and methane levels.  Information from the Gas Analyzer allows operators to obtain the highest ...

  • Influence of Decreasing Heating Value on MSW Combustion

    Test runs in the TAMARA test facility to investigate the influence of decreasing lower heating value on the combustion of waste showed that the combustion quality could easily be kept constant at heating values exceeding 5 MJ/kg. The burnout of grate ashes and flue gas had slightly fallen off at lower heating values whereas the level of PCDD/F in the raw gas stayed constant in all tests. The ...


    By AquaConsoil

  • Combustion strategies for PFI hydrogen IC engines

    Hydrogen is a very interesting fuel when it comes to load control. The high flame speeds of hydrogen mixtures and its wide flammability limits permit very lean operation. Where possible, Wide Open Throttle (WOT) operation is used, which regulates the load with the mixture richness (qualitative control) instead of using volumetric regulation (quantitative control) and, thus, avoiding pumping ...


    By Inderscience Publishers

  • Application of combustion analyzers in safety instrumented systems

    The combustion process has always been considered having the potential for a hazardous event which could lead to personnel injury or loss of production. To mitigate this risk, the process industry is now implementing Safety Instrumented Systems which can identify hazardous operating conditions and correctly respond in such a way to bring the combustion process back to a safe operating condition ...

  • Corrosion Problems Arisen from the Use of Alternative Combustibles

    Introduction Metal Corrosion has been a subject of growing important in cement furnaces during the past few years. This development is mainly a result of the tendency to use alternative fuels with ...


    By Castolin Eutectic

  • Portable Combustion Analyzers as Safety Devices - Case study

    Portable Combustion Analyzers Can Be Used as Safety Tools for Technicians in Residential or Commercial HVAC Applications With all residential and commercial boilers, furnaces, and heaters, there is an inherent risk that cracks in the heat exchanger, improperly maintained ducting systems, or other malfunctions can cause combustion gases to leak into the living or working environment ...

  • Investigation on the spontaneous combustion of refuse-derived fuels

    Refuse-derived fuel (RDF), a high-caloric material, is used by various combustion processes, such as power plants, as alternative fuel. Several explosion accidents, however, possibly initiated by the spontaneous combustion of stored RDF, have been reported in Japan. Therefore the spontaneous combustion of RDF prepared from domestic garbage was investigated using chemiluminescence. RDF samples ...


    By SAGE Publications

  • Effect of hydrogen supplementation on the performance, combustion and emission characteristics of a natural gas fuelled S.I. engine

    This article represents the results of a single cylinder engine using specially designed electronically actuated fuel injection system fuelled with neat CNG, and mixtures of hydrogen in natural gas (HCNG) of 5, 10, 15 and 20% by energy. Experiments were conducted with wide open throttle and varying the equivalence ratio. Hydrogen which has fast burning rate, when added to compressed natural gas ...


    By Inderscience Publishers

  • Detailed chemical modelling of a flameless combustion turbine for pollution prevention

    Flameless combustion has been acknowledged as one of the most interesting combustion technologies to meet both the targets of high process efficiency and low pollutant emissions. The present investigation is concerned with the application of the flameless combustion mode to an adiabatic combustor, typically used in gas turbine engines. Detailed chemical kinetics calculations, by means of a ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you