combustion efficiency analyzer Articles

  • AMETEK THERMOX Introduces the WDG-V Combustion Analyzer

    Abstract AMETEK THERMOX Introduces the 5th Generation THERMOX Combustion Gas Analyzer in a CONTROL Magazine Exclusive. WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as well as CO and methane levels.  Information from the Gas Analyzer allows operators to obtain the highest ...

  • 5th-Generation Thermox WDG Flue Gas Combustion Analyzer

    "For more than 40 years, we have been a leader in combustion gas analysis," says Mike Fuller, divison VP of sales and marketing and business development for Ametek Process Instruments, "and we believe the WDG-V is the combustion analyzer of the future." WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as ...

  • Combustion optimization by fast excess air control – Case Study

    Combustion is the conversion of primary chemical energy contained in fuels into heat through the process of oxidation at high temperatures. The oxygen required for the combustion is supplied as part of the combustion air that is fed to the process. In ideal (stoichiometric) combustion the amount of oxygen supplied to the process is just sufficient to burn all combustibles completely. In real ...

  • Xp3 Fuel Efficiency and Maintenance Case Study by Pepsi Guatemala

    PEPSI Guatemala Fuel: Diesel Machine/Type: Truck/Motor Test: Fuel Efficiency and Maintenance OBJECTIVE Evaluation of Xp³ for Diesel’s effectiveness in transport units Nos. 950 y 945. Fuel consumption history, oil analysis, and injectors were checked before Xp³ was added. Oil analyses were conducted after 5,352 km, with and without Xp³. In addition, a detail record of ...


    By Xp3 Canada

  • MAXUM edition II - Total sulfur analyzer – Case Study

    To comply with environmental regulations in the production of low-level sulfur fuel, it is necessary to get reliable information about the product quality and sulfur content. The Siemens Maxum II, Total Sulfur on-line process gas chromatograph, provides this information in reliable manner using process suitable analytical procedures. The Total Sulfur solution applies a continuous sample ...

  • Why You Should Consider a Sample Conditioning Unit for Taking Low NOx Measurements When Using a Portable Emissions Analyzer

    Using state-of-the-art technology, we here at E Instruments create high-quality portable industrial combustion gas and emissions analyzers that are capable of taking precise, low NOx measurements for both NO and NO2. In particular, we recommend our sample conditioning unit to those of you who need to take accurate, low NOx or SO2 ...

  • New Green Methodology for Measuring Total Organic Carbon (TOC) — Supercritical Water Oxidation (SCWO)

    Analyzing the total organic carbon (TOC) content of industrial wastewater, process influent and effluent water, and environmental water samples can be very challenging. These aggressive sample matrices often clog or damage TOC analyzers that use the combustion method. This can result in expensive preventive maintenance and excessive non-regenerative waste. To address these critical issues, GE ...


    By GE Analytical Instruments

  • The Other Side of Zirconium Oxide case study

    Regular Fuel Efficiency Applications Separate Oxygen and Combustibles Sensors In standard flue gas applications for Thermox analyzers, the user generally tries to extract the maximum energy from the fuel and transfers as much of that energy as possible to the process. These applications require the process to be operated as efficiently as possible by keeping both oxygen (excess air) and ...

  • Insitu analysis of ammonia slip and water vapor using a tunable diode laser for SCR/SNCR optimization and boiler tube surveillance in power plants

    ABSTRACT Environmental Regulations driven by the 1990 Clean Air Act require Power Plants to reduce NOx emissions. SCR's and SNCR's reduce NOx emission by injecting ammonia into the combustion flue gas. which ideally reacts with the NOx to form H?0 and Nj. The efficiency of the SCR SNCR is determined by monitoring the outlet for excess NH3. referred to as NH3 slip. The flue gas sample ...

  • Biofuels Gas Monitoring

    The Customer The Company is one of the world’s leading developers and producers of advanced fuels and green chemicals. The Process The Company uses a gasification process that breaks down wood chips, waste and other feedstock using plasma technology. The process produces a uniform synthetic gas (syngas) that is used to power their turbine engines. ...

  • Electrochemical degradation of 2,5-dichloro-1,4-phenylenediamine by anodic oxidation

    Electrochemical degradation of 2,5-dichloro-1,4-phenylenediamine (DP) in aqueous solution by anodic oxidation was investigated. Linear sweep voltammograms and cyclic voltammograms were studied. The influence of operating parameters on electrochemical oxidation of DP was studied as a function of the current density, initial pH, and initial concentration of DP. The degradation kinetics analysis ...


    By IWA Publishing

  • Heating value

    The CustomerThis Chemical Company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The ProcessThe company uses flare stacks to dispose of the waste products ...

  • Thank You All for the Success of MEXA-7000

    The MEXA-ONE, our new Motor Exhaust Gas Analyzer launched in 2012, has become our core product superseding the MEXA-7000 with a surge in the number of shipments since the beginning of 2014. The MEXA-7000 had evolved continually over the nineteen years since its introduction in 1995 to respond to the significant changes that took place in emission regulations, types of fuel and new technology in ...


    By HORIBA Europe GmbH

  • MAXUM II - Perfect on-line gasoline analysis using the MAXUM II process gas chromatograph – Case Study

    Gasoline is a petroleum-derived liquid and primarily used as fuel in combustion engines. The analysis of gasoline for its chemical composition is extremely important as e. g. the concentration of individual hydrocarbons determines the octane number as well as the emission characteristics of gasoline. Therefore, great efforts are made to serve producers of gasoline with an efficient tool for ...

  • Process analytics in methanol plants – Case Study

    Methanol is a clear liquid usually made from natural gas. It is a clean burning fuel, containing almost no sulphur or nitrogenous materials. It is a petrochemical that is used to make countless industrial and consumer products. In the future, methanol could be used as a source of hydrogen for fuel cells. Different concepts are in use to produce methanol looking always for higher plant efficiency ...

  • Online analysis of TOC, TNb, TP, and COD in water

    The control of waste water treatment plants is of special importance - from an ecological as well as economic point of view. The most common water parameters for controlling and optimization are the total organic carbon (TOC), chemical oxygen demand (COD), total nitrogen bound ( ...


    By LAR Process Analysers AG

  • New gas calibration method eases TOC analysis

    LAR Process Analysers AG of Berlin,  Germany expanded the range of feaiures of its measuring device QuickTOC, which facilitates the monitoring of ultra pure and cooling water, boiler feed and condensate measurement, and industrial wastewaters. For many years, the Berlin company lias been developing, high quality measuring devices and processes for the TOC analysis of condensates and boiler ...


    By LAR Process Analysers AG

  • Minimizing ammonia consumption in DeNOx plants – Case Study

    Flue gas denitrification Combustion processes result in emissions that can be harmful to the environment, in particular carbon dioxide (CO2), sulfur dioxide (SO2), nitric oxides (NOx), and dust. Therefore, measures are implemented in power stations and other plants comprising combustion processes to reduce emissions. For flue gas denitrification, besides front-end primary ...

  • Checklist for Boiler Maintenance

    Boilers play a crucial role at industrial facilities and it is imperative that they be safely and properly maintained. Routine boiler maintenance can help prevent unplanned shutdowns and outages, increase the efficiency of the boiler and cut operating costs, and ensure that the facility is in full compliance with all laws and regulations governing boiler safety. What follows is a boiler ...


    By STI Group, Inc.

  • Process analytics optimizes crude gas processing for the production of fine chemicals at Lonza – Case Study

    Fine chemicals are used as active ingredients or additives in the pharmaceutical and food & beverages industries, as well as in agriculture. The cracking of raw materials such as light virgin naphtha or liquefied gas results in intermediate products (ethylene, hydrogen, methane, CO2). At the end of the process chain, these can provide highly pure materials such as niacin (vitamin B3) or ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you