combustion efficiency monitor Articles

  • Critical Monitoring of Forklift Emissions and Warehouse Ambient Air Quality - Case Study

    Our team of experts has been hard at work and has just released an industry-leading report detailing Forklift Emissions in Warehouses: The main objectives of this study were to investigate the effects of different engine conditions on exhaust gas emissions and to observe the effect that forklift emissions have on the ambient air quality of the warehouse.             ...

  • Why You Should Consider a Sample Conditioning Unit for Taking Low NOx Measurements When Using a Portable Emissions Analyzer

    Using state-of-the-art technology, we here at E Instruments create high-quality portable industrial combustion gas and emissions analyzers that are capable of taking precise, low NOx measurements for both NO and NO2. In particular, we recommend our sample conditioning unit to those of you who need to take accurate, low NOx or SO2 ...

  • A quick guide to oil analysis for engine test applications

    Reliability testing is a very important component of new engine development. Engineers need to fully understand and chart the engine lifetime performance under a variety of conditions before mass production may be considered. Many important performance data parameters are collected in real time through the many different types of sensors that are connected to the engine in the test cell and oil ...


    By Spectro Scientific

  • High Temperature Combustion of Biogas

    High Temperature Combustion of Biogas Efficient combustion of biogas Controlled and concealed combustion Combustion temperature > 900°C Residence time more than 0.3 s Insulated combustion chamber High safety standard The HOFGAS® - IFL4c high temperature flare provides safe and environmentally-friendly combustion of biogas. The exhaust gas ...


    By Hofstetter BV

  • Burner Efficiency

    The Customer The Company is a world leader in combustion technology. They design and manufacture burners for residential, commercial and industrial applications. The Process After the burners have been manufactured they must be tested to meet the standards of BTS-2000. This standard specifies the methods procedures for determining the performance and ...

  • Reliable silica monitoring supports power station efficiency

    West Burton B CCGT is a Combined Cycle Gas Turbine power station near Nottingham in the UK. It has three open-cycle gas turbines capable of generating enough electricity for approximately 1.5 million UK homes. In common with all combustion based power stations, the CCGT has a requirement to monitor silica levels in the Plant’s water and steam processes. Sean Todd, the Plant’s Control ...

  • Why high temperature combustion of landfill gas?

    Due to the accumulation of knowledge and the tightening of environmental law, the landfill technology has increasingly become concerned with the management of trace compounds in landfill gas. With landfill gas, contamination is through sulphur, chlorine, fluorine, halogenated hydrocarbons and heavy metals. Other trace elements such as volatile organic compounds (VOC), impose environmental ...


    By Hofstetter BV

  • 5th-Generation Thermox WDG Flue Gas Combustion Analyzer

    "For more than 40 years, we have been a leader in combustion gas analysis," says Mike Fuller, divison VP of sales and marketing and business development for Ametek Process Instruments, "and we believe the WDG-V is the combustion analyzer of the future." WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as ...

  • Biofuels Gas Monitoring

    The Customer The Company is one of the world’s leading developers and producers of advanced fuels and green chemicals. The Process The Company uses a gasification process that breaks down wood chips, waste and other feedstock using plasma technology. The process produces a uniform synthetic gas (syngas) that is used to power their turbine engines. ...

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Air Separation Plants and the Use of Oxygen Monitors

    Air separation plants are critical for many different industries, from clean energy to manufacturing. Nowadays, cryogenic is the most common type of distillation used to separate air into its component gases - nitrogen, oxygen, and inert gases including helium and argon. If your industry relies on air separation for product development or manufacturing, then knowing how the process works is ...

  • Case study - Water quality monitoring and weather data at Pampulha Lake-Brasil

    In 2010, OTT Hydromet's partner in Brasil,  Hexis began working with CETEC. This resulted in the installation of a buoy, equipped with an automatic profiling system, in early 2013. The project’s objective is the continuous monitoring of the lake’s water quality, with focus on improving this by the 2014 World Cup Games.  Adcon, Lufft and OTT technologies (Hydrolab DS5X ...


    By The OTT Hydromet Group

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


  • Learn How to Implement a More Effective Emissions Monitoring Strategy with Our Application Note, “The Art of Emissions Monitoring and Sampling: Maintaining Gas Integrity”

    Over the past 15 years, all of us here at E Instruments have used our expertise to design, manufacture, and distribute quality emissions monitoring equipment, air quality monitors, and many other products to clients all over the world. Aside from creating many high-quality and reliable instrumentation solutions, something else we've always ...

  • NOx in Non-Utility Industries - Part I NOx in Non-Utility Industries - Part I - Air emission origins, best control solutions and monitoring methodology for nitrogen oxides

     Problems with reducing nitrogen oxides (NOx) are widespread in the general process industries. These industries, together with medium size utility and power generators contribute about 15 percent of global NOx emissions. The emission sources addressed include various heaters employed in chemical and petrochemical plants, nitric and sulfuric acid plants, glass furnaces, iron and steel mills, ...


  • Case study - Be modern invest in biomass boilers

    As one of the UK’s largest fireplace manufacturers and suppliers of bathroom furniture, Be Modern is an established Group of Companies based in the North East that employs over 350 skilled workers. Established in 1964 the group supplies products across the UK to a wide and diverse customer base as well as exporting products across Europe. With over 500,000 square foot of manufacturing ...


    By Mawera (UK) Ltd

  • Combined Heat and Power (CHP) essentials

    'CHP essentials' introduces the concept of power and heat 'production possibility sets', starting at the cradle of CHP, i.e., the thermal power generation plant. The latter always occasions 'fatal' heat that is either recovered (the 'merit' of CHP) or wasted (condensing). This split paves the way to defining the production possibility sets of CHP plants, shown for steam turbines, internal ...


    By Inderscience Publishers

  • Biomass gassing as an effective source of energy

    Type     HOFGAS®- IFM4c 4000/2100 Performance     2100 Nm3/h / 3500 kW          Location     Limoges (FR) Situation A prestigious gassing plant for biomass is being built in the heart of France. The owner is promising himself a significantly higher level of efficiency through ...


    By Hofstetter BV

  • Case study - JJO wood waste – biomass

    A UK leading producer of kitchens and bathroom furniture invest in the future of no costs for the disposal of wood waste and no oil or gas bills for heating of the total company site premises. J J O PLC – manufacturer of Colonial Kitchens, Colonial Bedrooms, eco Kitchens and eco Bathrooms. Founded over 100 years ago and now the leading supplier to many of the best outlets within the ...


    By Mawera (UK) Ltd

  • Largest Hofstetter Installation

    Type     HOFGAS®- LPM 7000  Commissioning     2003 Site     Landfill Pinto (ES) SituationOne of the Europe’s largest landfill sites is located in the Pinto region, south of Madrid, where a modern waste treatment and energy recovery system is currently being developed. Urbaser S. A. is implementing a new plant ...


    By Hofstetter BV

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you